- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have the same car, same problem. I've still not been able to fix it, despite taking the inside panels off the rear doors, checking the rods were seated, applying WD-40 to the lock mechanisms, and manually working the mechanism. Child locks are not engaged, but I tried putting them on and off too. Just won't open.
There should be a screw or 2 somewhere around the interior door handle, you may have to look for it. After you find those, there will be a series of fasteners that hold the door panel to the door. Get something that you can pry with that won't scratch. Start at one side or corner, gently pry the panel from the door, once you get the first one off, the rest should be pretty easy. Just pull firmly, and don't worry you won't break anything.
for 1991 geo metro 1.0 liter 3 cyl engine the timing is 6 degrees before top dead center. you will need a tachometer because the rpm must be 800 when you set the timing. also you will need to disconnect the vacuum advance to the distributor, and plug the hose to avoid a vacuum leak. (alternate method is to pinch the vacuum advance hose going to the distributor while you are setting the timing) Good Luck!