Question about 2007 Chevrolet Silverado 1500 2WD

2 Answers

Will not shift into 4wd low but will shift into 4wd high

When trying to shift into 4wd low from 4wd high it will not lock in. I have tried in soft sand not still won't work. 4wd high works great!!!!! It only has 14,000 miles. Its a new version of the 2007 silverado Z71 with all of the bells........

Posted by on

  • Anonymous Mar 19, 2014

    transmission in neutral moving to 4wd hi or low causes grinding sound

×

2 Answers

Thanks for your response johnnyc85.... I did some searching on the internet and found it. When you need to go into 4wd low, just turn your knob to the 4wd low position and when it starts to blink just put the truck into drive or reverse and move about 1mph it will lock right it. It takes about 5 seconds to engage.

Posted on Jul 02, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 117 Answers

It sounds like a transfer case problem in this case will have to get inspected

Posted on Jul 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 ford ranger - Where is the 4x4 actuator located


On the transfer case
Transfer Case - Electronic Shift
The four-wheel drive electronic shift-on-the-fly feature electrically shifts the vehicle transfer case between 2WD, 4WD HIGH, and 4WD LOW. The system mode is selected by the operator through the mode select switch (MSS) on the instrument panel. The operator is informed which mode the system is in by two instrument cluster indicators: one for 4WD HIGH which appears as 4WD, and one for 4WD LOW, which appears as 4WD LOW. Shifts into 4WD HIGH can be made at any speed. When shifting into 4WD HIGH with the vehicle stationary, tooth blockage may occur preventing shift completion. When the vehicle is driven above 8 km/h (5 mph) the shift will complete. When shifting in or out of 4WD LOW, the four-wheel drive (4WD) control module requires that the vehicle speed be less than 5 km/h (3 mph), the brake pedal be applied, and the transmission be in NEUTRAL (automatic transmission) or the clutch pedal be depressed (manual transmission).
The gearmotor encoder assembly is mounted externally on the transfer case. It drives a rotary cam which moves the mode fork and range fork within the transfer case between the 4WD HIGH, 4WD LOW, and 2WD range positions.
The four-wheel drive (4WD) control module controls the gearmotor encoder assembly that shifts between 4WD HIGH, 4WD LOW, and 2WD modes.

Mar 17, 2017 | Ford Cars & Trucks

1 Answer

How can I put the suburban into 4x4


I have a 1994 4x4 Suburban. In mine, there's a stick on the hump in the floor, and I'm sure this is the case with yours too. This year model does not require that you get out and lock your wheel hubs. There are labels that are supposed to light up to tell you if you're in 2wd, 4wdHigh, or 2wdLow, but mine don't seem to work. If it's dark out and I can't see the labels, I just have to remember that 4wd High is all the way towards me, 4wd Low is all the way forward, and 2wd in sort of in the middle (but closer to me than the actual middle).

To shift into 4wd High (which is what you'll use for most purposes, like driving in bad weather), just pull that stick back towards you in one swift motion. You can do this while you're parked or while driving forward down the highway.

To shift back out of 4wd High and into 2wd, just push that stick forward a little bit, to where it was before.

To shift into 4wd Low (which is what you'll use only for extreme conditions, like off-road mudding or getting out of your driveway in super deep snow), you have to be stopped. You can NOT just shift into 4wd Low while you're going down the road. First, put it into Neutral (with the shifter on the steering column), Then push that stick on the floor all the way forward. Mine is hard to push, so I use my foot.

To shift back into 2wd from 4wd Low, you need to be stopped and in Neutral also. Pull the stick back towards you to the same position it was in before. (Not all the way towards you, or you'll be in 4wd High instead of 2wd.)

Hope that helps.

Feb 15, 2014 | 1994 Chevrolet Suburban

1 Answer

4x4 K1500 Chevy Truck, 4 wheel drive repair instructions


There are a number of different hub systems so this may not work but it has worked for me on both auto and manual locking hubs. On a flat surface without traffic. Put the trans into neutral, shift the transfer case into 4x4, shift the trans into reverse and back the truck up 15-20 feet. Completely stop and shift trans into drive. See if this has locked the hubs in. If not, you can also try following the same instructions except shifting into 4wd low. Sometimes the hubs need a "bump" to get them to slip into place. Keep In mind that if the 4 wd low select works, you need to shift it back into 4 wd high before continuing! When taking the truck out of 4wd to 2wd, I recommend the same, shift to neutral, select 2wd, back truck up, shift back to drive and check. Its entirely possible that your hubs need maintenance (they're often overlooked) but hopefully this will get you going. Please let me know if thus worked or if I can offer other suggestions. Good luck!

Jan 18, 2012 | Chevrolet 1500 Cars & Trucks

1 Answer

How do I turn 4wd on?


    • 1 Start your Dodge truck's engine.
    • 2 Turn the electronic transfer case from "2WD" to "4WD Lock" to engage the high range 4WD, if the dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" to "4H." The electronic transfer case is located on the instrument panel and is marked with "2WD," "4WD Lock" and 4WD Low." The lever-equipped transfer case is located to the right of your leg and is marked with "2H," "4H" and "4L."
    • 3 Shift the transmission into "Neutral" while the vehicle is either stopped or rolling at 2 to 3 mph to begin engaging in the low range 4WD. Turn the electronic transfer case to "4WD Low," if the Dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" or "4H" to "4L."
    Tips & Warnings
    • Indicator lights will come on and alert you that your vehicle is in either the high or low range of 4WD.
    • Do not engage in the low range of 4WD drive if the transmission is in gear; you must shift to "Neutral" first.
    • Many Dodge trucks allow you to shift from 2-wheel drive to the high range of 4WD at up to 55 mph--consult your truck's manual to ensure that this is possible. Do not exceed 55 mph while engaged in the high range of 4WD. Do not exceed 25 mph while engaged in the low range of 4WD.
    • Do not engage in 4WD unless you are on slipper or rocky roads.

Sep 02, 2011 | 2005 Dodge Dakota

1 Answer

How to put a 95 or 96 jeep cherokee sport in 4 wheel drive. handle is left of the gear shift.


You can change on the run but as a general rule stop to change to 4wd.except 2wd to 4wd high.Just slow down to about 15mph and back off the gas.
2wd high is normal running
4wd high(is full time 4wd)this is slippery roads or muddy roads.
4wd high lock For bad and slower slippery and rocky roads.
4wd low lock is for extreme 4wd conditions
Don't use the last 2 on the main roads or transfercase will be damaged
Hope this helps

Dec 03, 2010 | 1995 Jeep Cherokee

3 Answers

4wd how to enguage


make sure your in nutural, or park then if you have hub locks turn them to locking position. then shift small shifter if available into 4 wheel low or high. or may have just a push button to engauge. then shift into low or high. then you may use your regular stick to shift or just shift into drive w automatic.

Jan 27, 2010 | 1998 Isuzu Rodeo

2 Answers

Stuck in Lo Range 4WD. Suggestions?


Try key in run position(without starting it) and try to shift it into 4wd high with the shift lever in neutral.

Apr 26, 2009 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

4WD shift problems


Some one told me to unhook the batery for half an hour then hook it back up and try it. Well it worked,no more shif problems.

Nov 26, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

772 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74418 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7254 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...