Question about 1999 Buick LeSabre

1 Answer

Climate Control Air Conditioning

Teh a/c blows cold but only distributes air from the Defroster and Floor Vents. Most air is from the Defroster. No air at all from the Dash vents.

Why?

Posted by on

  • 1 more comment 
  • Anonymous Jul 06, 2008

    a/c blows cold but out the defroster vent mac

  • Anonymous Sep 09, 2008

    Mine is a 2001 LeSabre with auto climate control. When driving car around town, air conditionar works fine. When at highway speeds, works for a short time and then as car cools down, air does not flow, however the fan is working at eventurally goes to highest speed. If I stop car and open and close a door, the air flow is good, but slowly reduces to zero. The blower was replaced as it was replaced, however did not help with problem.

  • Anonymous Mar 31, 2014

    vents blowing cold aire

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 421 Answers

Check for vac leaks under hood and dashbord

Posted on Sep 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does 1 side of dash blow hot and the other cold when ac is on with the dual climate control?


Check the actuator motor on the heater it directs the air into the vents. There is probably two of them be sure to check both. The motor makes the vents move and again directs the air where you want. Hope this helps.

Aug 01, 2016 | 2005 Ford Freestar

1 Answer

Air only blows from the dash vents and will not change to the defrost or floor, and I have no heat - only cold air. Air conditioning seems to work. 1994 jeep grand cherokee v8 with climate control.


the damper or flapper ibside the heater box is not moving. If they are vaccum actuated could be lack of vaccum or bad diafram in the actuator...replace

Sep 09, 2010 | 1994 Jeep Grand Cherokee

1 Answer

I have an 01 Jeep Grand Cherokee. When you turn on the air conditioning air does not blow out any of the vents except a small amount of air (cold) will blow out the defroster vents by the windshield. If...


behind the center counsel between the floor and the heater housing is a part that is called the blend door actuator. these usually go bad and have to be replaced.

Mar 15, 2010 | 2001 Jeep Grand Cherokee

1 Answer

Air conditioning works but does not blow thru vents


Not stated but assuming blows out at defroster or on floor? If yes, then check for vacuum leak. Trace the vacuum hose where it enters the firewall back to volume tank (possibly ball shaped) and on back to vacuum source at intake. If it attaches to a multi-line connector then also check each line that attaches for leaks. If problem not found then check line from firewall into cab. The line will go to the climate control switch and from there to the actuator on air diverter doors. Some times difficult to find but you can do it! Good luck.

Jun 28, 2009 | 1992 Chevrolet K1500

1 Answer

Heater control stuck blowinf hot air out vents


did you cheked if there is enough refrigrant ( freon ) in your tubes by measuring the pressure . if there is you may need to check your condensor its may be clogged and not letting enough air comes through to cool the refrigran

May 31, 2009 | 2000 Chevrolet S-10

1 Answer

Passenger side blows hot air when front control set to Air


you cant adjust it ,this requires the dealers computer to re set it,or a phyiscal control has packed up like a vacumn pipe has split where it pushes onto the valve that controls the flap in the heater unit.

Apr 25, 2009 | 2005 Dodge Durango

1 Answer

2001 ford focus defroster blows out ac vents


may be just a cable adjustment.


SECTION 412-01: Air Distribution and Filtering 2001 Focus Workshop Manual DESCRIPTION AND OPERATION Air Distribution and Filtering The new heating and ventilation system ensures even air distribution.
The temperature control and air distribution flaps are controlled by two operating cables. All vehicles have a recirculated air function, with the flap controlled by a servo motor.
Air is supplied to the windscreen and side windows regardless of the air distribution setting.
The clean air filter is fitted as standard in most countries. This cleans the incoming fresh air of pollen and dirt particles. It must be renewed after every 40,000 km under normal operation conditions, or after 20,000 km under difficult conditions. If no clean air filter is installed, a plastic grille is fitted over the air intake. This can easily be replaced with a clean air filter.
Air distribution operating switch
Face level The main flow of air enters the passenger compartment at face level.
Face level/floor level The main flow of air enters the passenger compartment in equal parts at face level and floor level, and a small amount flows to the demister nozzles of the side windows.
Floor level The main flow of air enters the passenger compartment at floor level, and a smaller amount flows to the demister nozzles of the side windows.
Demist/floor level The main flow of air enters the passenger compartment in equal parts at the windscreen and at floor level, and a smaller amount flows to the demister nozzles of the side windows.
Demist The main flow of air enters the passenger compartment at the windscreen and a smaller amount flows to the demister nozzles of the side windows.
Air distribution operating switch Air distribution operating cables
NOTE: The Bowden cables for LHD and RHD vehicles are identical. However, they are fastened to the air flap operating mechanism with the respective reverse side of their connectors.
The air distribution switch operates with two Bowden cables. The cables operate the air distribution valves in the heater housing.
To remove and install the cables, the rotary switch must be turned as far as it will go to the left. The air flap mechanism engages easily in this position, making the installation of the cables easier.
--------------------------------
Air Distribution Cable Control Assembly Removal
s1y~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
  1. Remove the radio/cassette unit and the CD player (if equipped). For additional information, refer to Section 415-01 .
  1. Remove the bezel with heater/air conditioning controls.
  1. Remove the bezel with heater/air conditioning controls (continued).
    • Pull off seven electrical connectors (six shown).
  1. NOTE: To remove the Bowden cables, turn the rotary switches as far as they will go to the left.
    Remove the bezel with heater/air conditioning controls (continued).
    • Unclip the Bowden cables.
  1. Remove the lower driver's side footwell trim.
  1. Unclip and remove the air distribution Bowden cables.
  1. Unclip and remove the temperature control Bowden cables.
    • Unclip and remove the temperature control Bowden cables.
Installation
  1. NOTE: Route the new Bowden cables without kinks and check for easy accessibility.
    NOTE: To install the Bowden cables, turn the rotary switches as far as they will go to the left. The mechanism engages easily in this position.
    NOTE: The Bowden cables are identical for RHD and LHD vehicles, although they are fastened to the air flap operating mechanism with the reverse side of their connectors.
    Install the components in reverse order.
  1. Check operation of the Bowden cables.

Mar 17, 2009 | 2003 Ford Focus

1 Answer

Heat wont blow through heater or defroster vents


common problem, check under dash by the gas pedal if control arms are muving went selecting from ac to heat cuz this it is the control for the vents to go from ac to heat and to defrost.

Jan 18, 2009 | 1997 Chevrolet K1500

Not finding what you are looking for?
1999 Buick LeSabre Logo

Related Topics:

877 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...