Question about 1995 Geo Metro

2 Answers

95 geo metro

I need a diagram showing what marks i need to align for the timing belt/camshaft timing

Posted by on

  • wrangler59 Jun 30, 2008

    please help

  • Anonymous Mar 22, 2014

    dual timing marks, is the pin in the cam at 12 oclock

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

I just did my 95.
The bottom outside pulley has a little cut in it,and its little.Line that at 5 degrees the 3rd line on the plastic marker.
Now on the cam,there`s 2 marks.use the one that has the nipple under it and line it with the v on the back plate.

and wala.

Posted on Jul 13, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need a fuse diagram for a 1995 geo

Posted on Sep 28, 2008

2 Suggested Answers

  • 80 Answers

SOURCE: 95 geo metro

alldata,com can get you a full instruction book online.

Posted on Aug 04, 2008

  • 58 Answers

SOURCE: geo metro timing diagram

woot i feel your pain i had the same problem. go to autozone.com and go to thier vehicle repair.
enter your year make and model and find it. but please hear me on this one.. be carfule thier are like 2 timing references and one timing mark. USE THE DOT. pls i learned the hard way. lol use the dot on the cam sproket. good luck

Posted on Jan 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Removing/ Install the timing belt cover 95 geo metro 1.3


First did the belt break? You have an interference engine. If it broke while a stop. It maybe OK. If at highway speeds, it is trashed. This has to be checked out first. Remove the cams and do a leak down test on the cylinders. Interference engines will bend/break valves and punch holes in the pistons. If any of this happened, the car is not worth fixing. A replacement engine will cost more than it is worth.

Aug 14, 2016 | 1995 Geo Metro

1 Answer

I have the timming belt off of my 1993 geo metro the timming markes are off' i need to know how to realighn the the crank and cam gears.


Hello hjolana: My name is Roger and i will help you. I have attached a picture of the timing marks.The camshaft mark aligns with the mark at top of cover behind the cam gear. The lower mark aligns with the notch on the block and the crankshaft key way is at 12:00 o'clock. See the picture. Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Rogerrogerf1_48.jpg

Aug 13, 2011 | 1993 Geo Metro

1 Answer

Where are the timing marks on the 89 geo metro


My sincere apologies for the severly delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it in case you still do.


Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need.


Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com

http://www.2carpros.com/car_repair_information/year/1989/make/geo/model/metro/1989_geo_metro_timing_belt_diagram_marks.htm

Mar 10, 2010 | 1989 Geo Metro

2 Answers

Timing belt geo metro 95 hatchback


roll the crankshaft pulley around until u get the mark to line up with 0 or TDC. once u get the cover off mark the cam sproket to the head with whiteout and mark the crank gear to the block also. (in case they move on you. loosen tensioner and pry to one side.tighten tensioner bolt and remove the belt. install new belt and get the slack to move toward the tensioner side. (u may have to move the cam slightly to allow all the slack to go toward the tensioner. then move it back to the mark, making sure the crank didnt move. loosen tensioner bolt and let it spring toward the belt and apply pressure with yr hand a little more snug while u tightn bolt. then rotate the crankshaft 2 revolutions by hand and your marks should line back up. if the marks are more than 1/2 tooth off u must re do it!

Feb 20, 2010 | 1995 Geo Metro

1 Answer

Timing belt marks for geo 1.3


From the book
crankshaft sprocket has a slot which must align with the key in the crankshaft
The mark on the lower timming belt sprocket must align with the mark on the engine front cover.
Pictures worth a bunch of words (email).

Feb 14, 2010 | 1996 Geo Metro

1 Answer

How to Replace timing belt


Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need. It also has schematics on cover bolt/nut locations.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1991/make/geo/model/metro/1991_geo_metro_timing_belt_diagram_marks.htm

Dec 05, 2009 | 1991 Geo Metro

3 Answers

I need a diagram of engine timing marks for a 1.6 litre engine


1996 Geo Truck Tracker 2WD 1.6L MFI SOHC 4cyl

2efa731.jpg

Fig.: Before installing the timing belt, position the camshaft sprocket (1) so that the timing mark on the sprocket (2) is aligned with the notch (3) on the inside timing belt cover (4) ...

5a2ee07.jpg

Fig.: ...and ensure that the crankshaft sprocket (1) timing mark (2) is aligned with the mark on the oil pump (3)

For more details, can register in autozone.com (free).

I hope help you with this (remember rated this help) Good luck.

Oct 15, 2009 | 1996 Geo Tracker 2 Door

1 Answer

Replacing broken timing belt on 92 GEO


a repair manual will show you the specs you need

Dec 06, 2008 | 1994 Geo Metro

1 Answer

Geo metro timing diagram


woot i feel your pain i had the same problem. go to autozone.com and go to thier vehicle repair.
enter your year make and model and find it. but please hear me on this one.. be carfule thier are like 2 timing references and one timing mark. USE THE DOT. pls i learned the hard way. lol use the dot on the cam sproket. good luck

Aug 18, 2008 | 1993 Geo Metro

1 Answer

95 geo metro


alldata,com can get you a full instruction book online.

Jul 13, 2008 | 1993 Geo Metro

Not finding what you are looking for?
1995 Geo Metro Logo

689 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...