Trying to fix my 1981 Olds. Delta 88 Royal Broughm, 5 liter engine, Rochester 4 barrel, I took it apart and can not get the lines hooked back up. Could you please email me a diagram or schematics for this or tell me where I can get them.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Air pump/Smog pump and Compressor go on first, on the shaft.
Power steering goes on next
Altenator is the last one.
After market pulleys and the above mentioned parts may change this order..
1983 olds delta 88 royale
I have a series II 3.8 liter. The MAF sensor is located under the plastic cover for the engin. You have to take the oil fill cap and neck off to lift the cover off. Once the cover is removed, the MAF sensor can be seen at the top and to the left of the engin. it is a small square box that has a three wire plug in and two vacume lines going to it. Ceck to see if the wire connections are ok before you replace the sensor. Good luck.
Your brake booster may be leaking or the check valve on the vacuum hose going to the booster may be bad. Do you hear a hissing sound coming from the booster when you push the petal? Check these first before tearing down your engine. Good luck. Please rate me so I know how I'm doing. Thanks.