At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Make sure it has gas going to the carb or injecters then if you have gas check to see if you have a spark it dont matter if you check for spark at the #1 wire just as long as there is a spark.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Do you have 12 volts at the large post and at the small wire coming from the key switch when the starter will not turn ? There is a neutral safety switch in the circuit that could have failed.
Do you get dash warning lights when you turn the key and no crank ? One possibility is the ignition switch, another is the starter. If it has an automatic trans, there is a neutral safety switch to keep you from starting the engine in gear.
i would check to see if you are getting fire from the coil, if not, i would have the coil checked out , and if bad , replace it, "if you are still having problems with it not starting, then i would check the fuel pressure.
Can only be a couple of things. Electric fuel pump is not functioning correctly, the electric switch is stuck between tanks, or you have a blocked line.
Yes your problem because you have changed the starter then you have 6 bad 1/2 worn teeth on the FLYwheel and the only way to fix your problem is to either remove the engine OR gear box and remove the flywheel and have a new starter ring fitted to flywheel and refit what was removed and away you go finished ...
THEother way to start every time till you do it is to HAND brake off put in 1st gear and turn engine over 1/2 a turn ,and then it will start every time, as the engine will stop the same place every time so thats were the 6 worn teeth are. Have a goodday
Let me know hoe you get on Ron
ARE you on Skype
Take off your gas cap and have someone stand there with thier ear at the hole, (no smoking), turn the key to on just before start and they should hear the fuel pump humming. if they dont then try to start. if it doesnt start turn key off and at that instant the pump should be heard again. What i think is happening is your pump is not energizing . Its supposed to energize when turning your key on and off. This can be caused by a bad fuel pump or pump relay switch. Hope this helps. please rate me
×