Question about 2000 Mercury Mountaineer

1 Answer

Garage door remote

I just bought a 2000 mercury mountaineer and I would like to know how to program the garage door remote - I think it is called homelilnk.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a problem i just brought a 2000 Mercury Mountaineer in full.That nite picked up from dealer there's a squeaky noise on the front end.i turn corner and backing up the truck feels like gunna break down.It's like the bumps on side the thru way it shakes the truck.had taken it in to get fix got it back it still does it n now can hear lite tapping in the motor.i need a
solution. scared too have my son in the truck ridin with me.

Posted on Oct 13, 2008

  • jaxjohns1 Oct 13, 2008

    have a problem i just brought a 2000 Mercury Mountaineer in full.That nite picked up from dealer there's a squeaky noise on the front end.i turn corner and backing up the truck feels like gunna break down.It's like the bumps on side the thru way it shakes the truck.had taken it in to get fix got it back it still does it n now can hear lite tapping in the motor.i need a
    solution. scared too have my son in the truck ridin with me.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought a 2008 Mercury Milan with gargage door opener on the sunvisor. Instructions are not in the manual and want to know how do you reset to open my gargage.


Hold the sync button on the garage door opener located on the roof on the garage. Hold it until the light bulb on the garage dor opener blinks. Hold the remote until the garage door opens or closes. Here is a link to help you out. http://www.ehow.com/how_4614761_program-garage-door-opener-remote.html hope this helps! Please give me 4 thumbs up!

Apr 19, 2011 | 2008 Mercury Milan

2 Answers

What garage door opener is programable with a Mountaineer? I had an opener in my previous home that the sales rep programmed from the remote...my current door remote cannot be programmed. I am buying...


Press and hold the two outer buttons on the homelink system in the car until the led flashes rapidly or goes out. Then hold the programmed remote up to the homelink system and at the same time press the button on the remote and the button on the homelink until the led light blinks rapidly or goes out. It should take less than 30 seconds. ----- Then go to the motor head and press the colored learn button on the motor head and go back to the home link and press the homelink button 3 times to activate. If your opener has dip switches stop at -----. Thanks BB

Sep 17, 2010 | 2003 Mercury Mountaineer

1 Answer

Programing garage door opener


You push the button that has the house design on it. It should change from steady to blinking. When it does you hold the garage door opener next to the blinking light and keep the button pressed on each. When the new code is learned the car button should indicate it learned the new code.

The you just press the button on the visor to see if it will work.

Mar 27, 2010 | 2007 Mercury Mountaineer

1 Answer

Just moved, no garage remote, need to set the opener in my SUV.


The garage door opener is needed to use the HomeLink system that is in your vehicle. This design is so that no one can program theirs to gain access to your garage. You will have to obtain a working remote and it will have to be programmed at the garage door.

Jul 13, 2009 | 2004 Nissan Maxima

2 Answers

How do you use the universal garage door buttons


there is a great website that has the instruction go here and download the instructions http://www.homelink.com/programming/programming.taf
If there is anything else I can help you with let me know

Apr 12, 2009 | 2007 Mercury Mountaineer

1 Answer

Program 2004 mercury mountainer garage opener


Verify the hand-held transmitter is operative.
Prepare for programming the universal transmitter by erasing all three channels (hold down the two outside buttons until the red light begins to flash [20-30 seconds]). Release both buttons.
Select one of the three universal transmitter channels to be programmed by pressing the desired button
Hold the end of the hand-held transmitter 25-51 mm (1-2 in) from the front surface of the universal transmitter so that the red light can still be seen
Use both hands to press the hand-held transmitter button and the desired button on the universal transmitter. Do not release either button.
Hold down both buttons until the red light on the universal transmitter flashes, first slowly and then rapidly. Release both buttons when the rapid flashing begins. The universal transmitter has successfully learned the new frequency signal and can be used in place of the hand-held transmitter(s).
If the hand-held transmitter appears to program the universal transmitter but does not open the garage door, the garage door opener may have a code protected or rolling code feature.
To operate, simply press the appropriate button on the universal transmitter. The red light is on while the signal is being transmitted.
IF THE GARAGE OPENER HAS ROLLING CODES---
program as above then------
Train the garage door opener receiver to recognize the universal transmitter.
Remove the cover panel from the garage door opener receiver.
Locate the training button on the garage door opener receiver. Location and color of the button may vary by garage door opener manufacturer. Refer to the garage door opener instruction manual or owner literature.
Press the training button on the garage door opener receiver for 1-2 seconds.
Press the programmed universal transmitter button for as long as the universal transmitter red light flashes (1-2 seconds). Release the button and re-press the button to confirm that the universal transmitter is trained to the receiver.
The garage door opener should recognize the universal transmitter.

Apr 01, 2009 | 2004 Mercury Mountaineer

2 Answers

How to program the homelink garage door opener on my 2000 navigattor


GOTO HOMELINK.COM

THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.

PLEASE NOTE: NOT ALL BRANDS/MODELS OF OPENER WILL WORK WITH THIS SYSTEM.

HOPE THIS HELPS

Mar 10, 2009 | 2000 Lincoln Navigator

1 Answer

Home link system will not accept garage door code.


I purchased a Chamberlain belt garage door opener. It was great! The lease on my duplex ended and the landlord bought it from me.

I found that the best way to program my vehicle's HomeLink buttons (to read the remote) was to do the learning procedure in a parking garage. This way the signal is not interrupted by all the waves around us.

Jan 02, 2009 | 2001 Lexus ES 300

2 Answers

Programming the garage door opener


I know what the problem is but never tried to resolve it. I have a 1998 XJ8 and went through the same problem. After numerous attempts to program the 4 channel built in opener I researched the problem and learned that the system in the car actually changes the code after every use. It's a security feature built in to the system. I simply started keeping my remote in the car.

There must be a way to disable the automatic randomizer so it retains the code from your remote opener everytime. Check with the dealer to see if it can be disabled and you will be in business. Please post the info if you get it.

Good Luck!

Nov 24, 2008 | 1998 Jaguar XJ8L

Not finding what you are looking for?
2000 Mercury Mountaineer Logo

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...