Question about 1992 Honda Civic

Open Question

TOOLS FOR TRANSMISSION REBUILD

I HAVE A HONDA CIVIC 3 SHAFT TRANSMISSION M24A, CODE A24A. NEED HOUSING PULLER (07HAC-PK4010A). WHERE COULD I RENT OR BUY IT?

Posted by on

  • Ed Woods
    Ed Woods May 11, 2010

    Most aamco trans shops will pull it for you

×

5 Suggested Answers

  • 337 Answers

SOURCE: Replacing crank shaft position sensor on 2000 Honda Civic

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528018f5b9

Posted on Dec 10, 2008

ewashmidas
  • 362 Answers

SOURCE: Mantainance...Honda Civic manual transmission.

1.9 Quarts of 10W30 or 10W40 motor oil.

Posted on Jan 29, 2009

  • 145 Answers

SOURCE: CRANK SHAFT PULLEY

Yes Auto zone have loaner crankshaft pulley extractor
better know as harmonic valancer puller.
you pay a deposit and when you bring it back the refund your money
do not use a bicycle chain like tool because that will damage your pulley. unless you are planing to install a brand new one.
there is a rubber ring in between the outer and inner part of the pulley than can be real easily damage.
you can temporary float one cylinder whit gasoline and cap it of whit the spark plug that will lock the engine temporarily when you have to turn the crankshaft bolt.
when you are done just remove the spark plug and turn the crankshaft to drain out the gasoline and unlock the engine.

Posted on Jun 30, 2009

MNfisherman
  • 11896 Answers

SOURCE: how to remove transmission on 97 honda civic dx

remove crossmember, axles, cables, tranny mount bolts (3), tranny to engine of course bolts

Go to autozone.com and register for full free online repair manual

Posted on Sep 11, 2009

  • 64 Answers

SOURCE: Automatic Honda civic wont reverse

take it back. They missed something. You should have a warranty on the work. Of course that does have limits which include both mileage driven and months since the vehicle was released to you. I am guessing you did not do the work since your saying you had it done. There really isn't much you can do other than have it taken apart and checked. So long as your TCM (transmission control module is not bad= computer for transmission)

Posted on Jan 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Honda Civic lax transmission won't engage in forward gears is there anything I can do shy of rebuild to save it for a little while longer


No that is pretty much a wrap the transmission is gone out to lunch and will need a rebuild most likely.

Sep 13, 2016 | 2002 Honda Civic

1 Answer

I'd like to rebuild transmission with a few new parts plus need blueprint on how to assemble it and will also need gasket etc. Can you help?


look online or some auto stores not all carry transmission rebuilt kits the kits run about 450 and up check with the kits if they come with a rebuild manual (most rebuild manuals about $45 -70) if it does not come with kit also will need some special tools which can be bought or some auto places rent ---biggest hurdle to start with will be the removal of the transmission

May 21, 2016 | Cars & Trucks

1 Answer

I am working on a 2005 Nissan murano passenger side cv joint axle removal. I have taken out the three bolts that hold the shaft into the transmission. I can not get the shaft out. Please help


Ok, go to your local auto parts store, rent an axle puller, or you can try a prybar.
The axle puller is a safer way to go. It looks like a dent puller or slap hammer.
Good Luck

Mar 28, 2015 | 2005 Nissan Murano

1 Answer

Need teardown and rebuild diagram for 1998 honda civic LX 5 speed manual transmission and specifications


Go to google and type in 1998 honda civic 5 speed transmission exploded view ,that should be helpful

Jul 21, 2012 | 1998 Honda Civic

1 Answer

Diagram of how to change a water pump for a 1997 mustang v6


On the 97 V6 you'll also need a puller to remove the power steering pulley as this bolts to the water pump housing. This is unusual. Doing this now actually. You can rent the "puller" at autozone. Remember to disconnect the battery and drain the coolant before you get started. The rest is in the Haynes. It'll take time, but its not a hard job with the right tools.

Feb 10, 2012 | Cars & Trucks

1 Answer

Ok got the retaining bolt off of harmonic balancer by using a breaking bar now using a 3 prong gear puller to remove balancer but it just dont want to budge.any suggestions


you may have the wrong puller to do the job. suggest you try an advance auto parts store and rent the right puller for the repair,all your money to rent the right tool will be refunded after the tools returned. the harmonic balancer should be removed easily with the right removal tool and a small ammount of wd40 sprayed onto the crankshaft behind and in front of the balancer onto the shaft. keep in mind that there is a half moon keeper key on the shaft where the balancer slides onto the crankshaft. lube the shaft well and it should slide off with ease with the removal tool. thank you for choosing fixya.com!!

Apr 18, 2011 | 1992 Buick Regal

1 Answer

How to replace ignition on 1997 honda civic


you probably have to take the steering whell off go to locale auto parts store and rent a puller and there is probably snap ring and what not in there and don't lose the pieces

Mar 26, 2011 | 1997 Honda Civic

2 Answers

How to remove transmission on 97 honda civic dx


remove crossmember, axles, cables, tranny mount bolts (3), tranny to engine of course bolts

Go to autozone.com and register for full free online repair manual

Sep 11, 2009 | 1997 Honda Civic

1 Answer

The pulley on the crank shaft that drives the alternator and A/C belt broke and I need to know how to remove and replace broken pulley.


You may need a pulley puller. Though this seems like a smart assed comment, it is the truth. They are ususally available to rent from your local parts store.

Jul 16, 2009 | 1992 Honda Accord

1 Answer

Rack &pinion


I wouldn't recommend this unless you have to. But if you do, just unscrew everything and do it slowly. The steering wheel needs a puller to remove. You need to rent/buy the tool from car part store. Then just keep unbolting. The better questions is why do you have to remove column.
hope this helps.

Oct 25, 2008 | 1991 Honda Civic

Not finding what you are looking for?
1992 Honda Civic Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...