- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Important note: Proceed exactly as follows; otherwise the reset system will go into the locked position and special tools are required to unlock it (Tech 2 tester).
1. Turn the ignition OFF. 2. Press and hold the reset button  (see the above picture). 3. After 3 seconds the "Distance till service" appears on the display, "InSP 0". 4. Press and hold the brake pedal. 5. Note: Ensure the button  is still pressed. 6. Turn the ignition ON. 7. The display shows: "InSP----". 8. After turning the ignition ON, wait for the service message to change and keep the reset button pressed for at least 3 seconds. 9. Release the brake pedal and reset button at the same time. 10. Wait for 10 seconds, until the display shows: "InSP XX,000 km". 11. The system is reset.
insp =inspection service due now
service codes are:-
insp=inspection service(timed service,high mileage)
in10=10k/annual service(low mileage)
in20=20k/annual service(low mileage)
this is dependant on what service regime was set during the pre delivery check,you cannot reset it once set.