- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Holden Rodeo 1989 2.6mpi , start and only runs for 2 or so seconds themselves stalls, after putting on a fuel peesure gauge, fuel looked okay and slowly dropping, found the ECM relay was intermittently switching on and off, gave it a tap and the engine kept on running, relay not repairable, replace with new part. Located in the fuse and relay box on the right hand side of engine bay next to battery. Hope this helps.
The fuel filter for your vehicle is located on the Fuel Pump Unit, which is located in the vehicle fuel tank. The Fuel Pump Unit must be removed from the top of the fuel tank in order to replace the Fuel Filter.
Hi Mark try spraying some starting fluid in the intake.You asked about putting petrol in the carburettor...your 1992 Saab has a carburettor? Impossible.That vehicle is fuel injected.Spray the starting fluid lightly or you'll flood the engine.
I had the same problem, I changed everything, air flow meter, plugs, leads, checked the timming belt etc. etc. The problem turned out to be the fuel pump, its inside the tank, you need to check the fuel pressure with an inline guage, it needs to have 30 psi, mine was only 15 psi. also you should have the injectors cleaned. good luck. Gary
fuel pump located inside petrol tank,
you have to remove the fuel tank, only 4 bolts, and a few pipes.
befor doing so, check fuel pump relay located in the middle of dashboard on the floor(horse shoe type plastic cover)