Question about 1995 Nissan Quest

1 Answer

Electrical my turn signals dont work at all. they dont even make the clicking sound . none of the bulbs even light up. iv checked both the relay and fuse and they are good.iv even put in a new switch and bulbs and still i get nothing.please help.

Posted by on

  • crazy_wolf41 Jun 29, 2008

    iv already done that .everything looks fine and all ground wires are good.any other thoughts?.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

Please check the wiring of the car..try that after visual check under hood confirms no obvious failures like missing drive belt or disconnected electric wires...


Good luck........

Posted on Jun 29, 2008

  • Anand Kumar
    Anand Kumar Jun 30, 2008

    There may be broken capacitor in wiring of the car or the main switch may defective check the voltage when the switch is turned on...............

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signal and emergency flashers don't work even after changing relay


sometimes the problem is a bulb is burnt out so check them all ,becomes if one dont work the power suppy wont reach the others : )

Jan 17, 2013 | 2003 Acura 3.2TL

1 Answer

I need to find the flasher relay for a grand marquis 2001 .does it has one? My turn signals wont work I can hear the sound but don't even flash


Yes, it does have a flasher, although it may be a combined unit with the hazard flashers relay. So you hear the clicking of the flasher relay? That seems to indicate the relay is working properly. Have you checked the bulbs and the turn signal fuse? Any turn signal bulbs light up anywhere, front or back?
How about your brake lights, do they work? Your car may have separate, stand alone turn signals in the rear, but many American cars use the same bulb and same filament on the bulb for the brake lights and turn signals. If your merc is like this and the brake lights work, then the bulb must be good.
Turn on the hazard flashers and see if all bulbs work and flash at each corner of the car. This would be the same bulb as for the turn signals. If they work, it could be a bad turn signal switch, may even be the flasher relay somehow malfunctioning, and in a few cases, a bad hazard switch can affect the turn signal switch. Check fuses and bulbs first. If you have any type of body control module that controls lights and other accessories, you may have to investigate that. I know I'm not being very helpful, just throwing out a few suggestions. Good luck.

May 21, 2012 | 2001 Mercury Grand Marquis

2 Answers

My brake light is on while driving and my turn signal lights are not coming on


there are several causes, check bulbs first. A crossed filament in a bulb can cause similar problems. The brake & turn use the same filament so if the brake lights are on, due to a bad switch underdash, the turn signals won't work.

Jun 08, 2011 | 1997 Pontiac Grand Am

1 Answer

Turn signals dont work most of the time. i cant find the flasher module


your Flasher/turn signal relay are malfunction,it suppose to have a regular clicking sound everytime you use the flasher/turn signal switch, you need to replace with a new one,but you need first to check your bulbs, the RELAY located on the left driver side under the dashboard, or turn your flasher so that you can here the clicking sound....

Feb 05, 2011 | 2002 Jeep Grand Cherokee

2 Answers

LEFT TURN LIGHTS WILL NOT WORK ON 1993 TROOPER


believe it or not, a 4 way flasher can cause this even if it itself is working properly, otherwise flasher, bulbs, or switch is bad .

Oct 06, 2009 | 1993 Isuzu Trooper

2 Answers

Drl and high beams dont work


Check the bulbs -- the daytime running lamps use the highbeams on the resistor -- There are two filliments per bulb one high; one low. If both high beam filliments are out nothing will work....replace bulbs if this is the case.

Aug 02, 2009 | 1999 Pontiac Sunfire

1 Answer

Turn Signals & Brake Lights Stopped Working


Check the flasher and brake light relays. Check relays under hood in electrical box to make sure they are seated properly and not loose.

Jun 02, 2009 | 1999 Chevrolet Cavalier

1 Answer

Turn signals and back up lights dont work, bulbs and fuses good. Blinker lights only work in dash when emergency flashers are on.


Test the circuit board wires on the back side of your taillights where the bulbs go in to see if power is going there with the blinker on, if yes replace the circuit board (quite common with these trucks). If there is no power back there check your flasher relays for each turn signal, assuming they dont click off and on when you tip the turn lever. if all else fails, head for the multifunction switch behind your steering wheel inside the column that your turn signal/wiper/cruise control lever is connected to.

Mar 06, 2009 | 1991 Chevrolet C1500

Not finding what you are looking for?
1995 Nissan Quest Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...