Question about 2004 Nissan Quest

2 Answers

Programming nissan Quest Remote control

Hi

I have a used Nissan Quest 2004 that Remote Control does not work . How can I program it?
Thanks Ray

Posted by on

  • 6 more comments 
  • hcbrf4i Sep 01, 2008

    I have a used Nissan Quest 2004 that Remote Control does not work . How can I program it?

  • hcbrf4i Sep 01, 2008

    I have a used Nissan Quest 2004 that Remote Control does not work . How can I program it?

  • hcbrf4i Sep 01, 2008

    I have a used Nissan Quest 2004 that Remote Control does not work . How can I program it?

  • guti_183
    guti_183 Jan 13, 2013

    Dealership

  • Anonymous Mar 13, 2014

    replaced battery in 2004 nissan quest, now radio and dvd player have stopped working

  • Anonymous Mar 18, 2014

    Service engine off

  • Anonymous Mar 28, 2014

    odometer showing partial milage, cold/hot temp and gas

  • Anonymous Mar 31, 2014

    Nissan quest electric nobes on dash for ac or heat just wide open

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Hi my name is Nabor what could be a code on my nissan quest po171

Posted on May 26, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a used Nissan Quest 1999 that Remote Control does not work . How can I program it?

Posted on Sep 01, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Nissan Quest 2000 does not start at all. The battery and the starter are fine. The problem has to do with resetting the alarm system. Can anybody help me with this problem?


you must do a search for the owners manual it will have the sequence in it for programming the remote control to reset the alarm you must disconnect the battery cables then reconnect the ground first then connect the + when the alarm sounds press a button on the remote control to shut it off if this works it should now disable the starter disable circuit and let the car start make sure the remote has a fresh battery in it LATER MAN!

Aug 22, 2014 | 2000 Nissan Quest

1 Answer

Why do the doors on my 2004 nissan quest sl keep unlocking by themselves even when the van is off?


It may be that water/moisture has gotten in behind the door panels...do you notice that it worsens in damp(er) weather? The car unlocks by itself if you leave the key in the ignition and you try and lock the doors.

Or somebody has the same coded fob (unlikely).

You might want to reprogram the remotes if you determine that the area behind the door panels is dry and there are no corroded wires, etc.

https://youtu.be/30TBRP1Mn5w

Good Luck.

2004 Nissan Quest Remote Programming Note: You must have all remotes on hand when performing this procedure. Any remotes not used during this procedure will become inactive.
1. Close and lock all doors with the driver's side power lock switch located on drivers door panel.
2. Insert key into ignition (DON'T TURN) and remove it from the ignition key cylinder at least 6 times within 10 seconds (this will need to be done at approximately one second intervals). You may need to insert and remove the key up to 10 or 12 times until your hazard lamps flash. PLEASE NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast or too slow the system will not enter programming mode.
3. Insert key into ignition and turn to the ACC position.
4. Within 5 seconds, push the LOCK button on the keyless remote. Your hazard lamps will flash. PLEASE NOTE: Do not press the button on the remote more than one time or the programming will not be successful.
5. If there are any remaining remotes (including working ones), Unlock then Lock all doors using the switch on drivers door panel. Within 5 seconds of locking and unlocking doors press LOCK button on the next remote. Your hazard lamps will flash. Repeat this step for each remote (including any working remotes).
6. When all remotes have been programmed turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver's side power lock/unlock switch and open the driver side door. Test all remotes.

Dec 14, 2017 | 2004 Nissan Quest

1 Answer

Programming garage door opener in the visor of the 1999 nissan quest


here is a link to the owners manual for a 1999 nissan quest. The instructions for programming a garage door are on page 2-27. Copy and paste the link in your address bar. I hope it helps.


http://www.nissan-techinfo.com/refgh0v/og/quest/1999-nissan-quest.pdf

Oct 08, 2009 | 1999 Nissan Quest

2 Answers

2004 Nissan Quest front control arm bushings


did you try any other part stores. if you don't have a press, you are better off getting the arm. faster and no pulling of the hair. best of luck

Aug 07, 2009 | 2004 Nissan Quest

1 Answer

Replace control panel on 2004 nissan quest


there is a c-clip you need a small screwdriver to pull it out then gearshift knob will pull off

Jan 25, 2009 | 2004 Nissan Quest

3 Answers

2004 Nissan Quest front control arm bushing replacement.


Sorry guys not a solution but I too have an 04 Quest, which supposedly has worn controller arm bushings and Nissan says I need both controller arms replaced. For a total of $950!!! I was told that they need to replace the whole arm and cannot replace only the bushings. Now reading the posts on this site I find that to be untrue. Seems all I need to spend is anywhere from $25 to $35 per bushing.

Nov 30, 2008 | 2004 Nissan Quest

1 Answer

Nissan Quest 2004 Tail Lights


Robynumber1,

Thanks for the email back. The nissan quest tail lights werenot operating, but the break lights were working. This was ultimately caused by a blown fuse. The fuse was blown by loose trailer lighting wires dragging on the ground, thus shorting. Problem fixed.

Aug 17, 2008 | 2004 Nissan Quest

Not finding what you are looking for?
2004 Nissan Quest Logo

Related Topics:

2,073 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...