My experience was it was the distributor gear and from what I understand its very common. Replace the distributor gear if you get po1345 and the engine seams to be running fine otherwise. 90 percent of the time that is what causes that code. pull the distributor and look at the gear. if it obviously has wear replace it problem solved.
Deals with Cam Shafts and Crank Shafts positioning and sensors.
Make sure your crankshaft balancer bolt is properly torqued, this alone can set his code off.
If not, may need to replace the cam phaser actuator.
646 views
Usually answered in minutes!
×