Question about 2002 Chevrolet TrailBlazer

1 Answer

Changing front struts

Do you have a how to for changing front struts

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

This is best done with a strut spring compressor if you don't have one, do not atempt this operation at home. the springs on the struts need to be compressed to allow the nut to be removed and the new strut be installed. if you still want to do this your self call an independent garage and see if they will compress the springs and change the struts for you. then you can remove and reassemble them at home. also some automotive part stores have machine shop to do this for you. again do not remove the nut on the strut without the spring being compressed properly this is very dangerous. ken!

Posted on Oct 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do I adjest the front struts on a 99 Honda Accord


go google and type in-- front struts on honda accord 1999 model --and there is a video on youtube .com that shows you how to do ti

Dec 06, 2015 | Honda Cars & Trucks

1 Answer

1996 Lincoln Continental will front struts from a 96 taurus fit the Lincoln


If your car is front wheel drive Taurus sturts will not work. You can go on ebay and find the right sturts that are changed over for your car.

Aug 05, 2012 | 1996 Lincoln Continental

1 Answer

How to remove rear struts on 2001 chrysler 300m


written and video instructions here plus where to buy.

  • how to change rear struts on 300m - JustAnswer www.justanswer.com/chrysler/3p878-change-rear-struts-300m.html ... how to change rear struts on 300m ... I am trying to change the rear struts on my Chrysler 300m. I started by trying to remove ... Traffic on JustAnswer ...
  • Strut Removal - YouTube www.youtube.com/watch?v=dvLZkqLyKoY
    • BY RAPTORV268
    • 10 MIN
    • 15K VIEWS
    2009-06-29 · Video embedded · Rear Strut Removal And ... Replacing Front Struts [2000 Chrysler 300M ... How To Install Replace Rear Shocks Struts 2001-06 Chrysler ...
  • 2001 Chrysler 300M - Rear Suspension ' Mopar www.mopar.com/chrysler/300m/2001/shop/6020/47/3916 2001 Chrysler 300M. ... HANGER Rear Suspension Pivot ... Charger, Chrysler 200, Compass, Dart, Durango, Grand Caravan, Grand Cherokee, HEMI, ...
  • Shock and Strut Mount for 2001 Chrysler 300M www.autopartswarehouse.com > ... > 300M > Shock and Strut Mount We have the Largest Selection of Shock and Strut Mount for your 2001 Chrysler 300M. ... Rear (6) Front (7) Front ... Shock and Strut Mount for 2001 Chrysler 300M
  • how do I replace rear struts on 99 300M, specifically how www.justanswer.com/car/1j2x3-replace-rear-struts-99-300m... ... how do I replace rear struts on ... Find the answer to this and other Car questions on JustAnswer. Login'Contact ... 5.Remove the rear parcel shelf trim ...
  • Chrysler 300M Shock Absorber And Strut Assembly - Free ... www.autopartswarehouse.com > ... > Chrysler Thinking of buying a new Chrysler 300M Shock Absorber and Strut Assembly? ... Chrysler 300M parts under Shocks, Struts ... Chrysler 300M Shock Absorber and ...

  • Mar 16, 2012 | Chrysler 300M Cars & Trucks

    2 Answers

    How to change front struts of 1995 buick regal?


    Go to Autozone and buy 2 front strut "cartridges". Then rent their strut cartridge installation tool from their loaner tool program. You can change both sides in about an hour without even jacking the car up-be sure to have a 15/16" wrench on hand for the nut and follow the directions that come with the loaner tool. Also spray a little penetrating oil on the nut a few days before you do the job. There is no reason to change the entire strut assembly unless something has failed.

    Nov 20, 2010 | 1995 Buick Regal

    1 Answer

    How do I change front struts on a 2007 tundra


    Please don't forget to rate!

    1. Before servicing the vehicle, refer to the Precautions section.
    1. Remove or disconnect the following:
    2. Front wheel
    • Strut-to-lower control arm nut/bolt and the strut
    • Strut-to-chassis nuts/bolts and the strut

  • c17hydro_31.gif

    Lower control arm Tundra


    To install:

    1. Install or connect the following:
      • Strut to the chassis. Torque the nuts/bolts to 33 ft. lbs. (45 Nm).
      • Strut to the lower control arm. Torque the nut/bolt to 144 ft. lbs. (195 Nm).
      • Front wheel
    // // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 31; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos';

    Nov 20, 2010 | 2007 Toyota Tundra

    2 Answers

    Does my 1993 6 cylinder 3.0 Plymouth Voyager have shocks or struts in the front?


    Hello tunamae: My name is Roger and I will help. Your 1993 Voyager has struts on the front of the vehicle. In order to change them you will need special strut tool in order to change the strut springs form the old struts to the new ones. Should you need further help please just ask.Please rate the answer you received as this way I know it was helpful. Thank You for using Fix Ya, Roger

    Mar 18, 2010 | 1993 Plymouth Voyager

    1 Answer

    How to change Front shocks on a jetta


    You'll need to unbolt the top of the strut and the bottom of the strut at the steering knuckle. You'll need a spring compressor to compress the spring before seperating the strut from the strut mount and spring. You may want to replace the strut mount also. MAKE SURE THE SPRING IS COMPRESSED ENOUGH BEFORE REMOVING THE TOP STRUT MOUNT!!!!

    Mar 06, 2010 | 2001 Volkswagen Jetta TDI

    1 Answer

    How to change front strut on 2001 toyota tundra?


    Yes you need a spring compressor to remove the strut if you take it apart you will have no way to compress the spring to get the strut back together.

    Oct 17, 2009 | 2001 Toyota Tundra

    1 Answer

    Changing struts in front on 2.2 cavilier 1999


    as long as the spring is already mounted on the new struts you should be fine with regular sockets

    Apr 09, 2009 | 1999 Chevrolet Cavalier

    1 Answer

    Changing front shocks and struts


    there is usually three nuts on top of the strut in the engine compartment and two bolts at your spindle and the strut falls off

    Feb 28, 2009 | 2001 Daewoo Lanos

    Not finding what you are looking for?
    2002 Chevrolet TrailBlazer Logo

    Related Topics:

    748 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    63291 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21981 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...