Question about 1992 Toyota Previa

1 Answer

Speedo i have a 92 toyota previa and the speedo has just stopped working what can i do to sort it

Posted by on

  • alewis546 Sep 21, 2008

    Mine stopped working right after someone drove into the back of the car, but the insurance company would not accept it was caused by the accident! Still don't know what the problem is.

  • gazzy boy Oct 04, 2008

    i have the same problem on my automatic previa gL i dont have a warning light but my overdrive light keepsflashing tho my overdrive is turned on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

On the tailshaft of the transmission there is a speed sensor. Under it is a gear, driven by the output shaft of the transmission. The output dshaft rives the gear, and the gear shaft drives the sensor, which sends a voltage to the speedometer for MPH. If this sensor is bad, you may also get a check engine light on. Remove the sensor, & inspect the gear. If the teeth are OK, replace the speed sensor.

Posted on Sep 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Speedo not working how to fix?


but first does the odometer work.
USA CAR?

this KEY question saves lots of work
after all the VSS drives both. so...... yes, a key question.

Feb 08, 2014 | 1997 Toyota Previa

1 Answer

92 previa multilpe electric problems no turn signals no power windows and more.....


sounds like a fuseable link somewhere make sure all your fuses aqre good after this it is on to the ohms meter got to find where you are loseing power

Mar 05, 2013 | 1992 Toyota Previa

1 Answer

Ubicacion de bomba de agua en una toyota previa 92, motor 2.0


necesito que me orienten donde esta la bomba del agua de una toyota previa 93 y como se la cambio?

Sep 17, 2010 | 1992 Toyota Previa

1 Answer

Fuel pump reset


well ive never heard of a reset for a fuel pump but if you put your ear to the gas tank and have someone turn the key on (not start) and see if you hear a buzzing sound if you dont then the pump is bad.

May 09, 2010 | 1992 Toyota Previa

1 Answer

How to replace dash light bulb of 1991 Toyota Previa van


pop fuse cover, remove vent housing, remove speedo upper cover, remove 4 bolts holding speedo remove speedo, change bulb

Mar 31, 2010 | 1991 Toyota Previa

1 Answer

I have a previa 92 and it's consuming to much gas almos 2 mi/g


try the oxygen sensors and spark plugs, plug wires, and distribution box. IT NEEDS A FREAKIN TUNE UP!!

Mar 06, 2010 | 1992 Toyota Previa

1 Answer

Toyota hiace regius 1997, finding how speedo works on the gearbox.


should be a transducer , electronic not cable.
held in by a m6 bolt (10mm head).
small plug 3 pin sort of deal.

Jun 26, 2009 | 1997 Toyota Previa

1 Answer

1991 Toyota Previa Dashboard lights


Yeah you can remove the hood and enginge but it's much harder that way! Just kidding the dash is notthat hard to get out one speedo cable and four screws witll get the speedo head out so you can change the bulbs, they are miniture bulbs to.

Jun 21, 2009 | 1991 Toyota Previa

1 Answer

Where is the brake load sensing valve on a Toyota Previa and where is it.?


brake load sensor valves are normally mounted on either the diff or the body above the rear axle
they are designed to open or close, depending on how much weight you are carrying, and let more or less oil to the back brakes

May 04, 2009 | 1992 Toyota Previa

1 Answer

92 toyota previa battery discharges


bad ignition switch. replace and recheck

Jan 26, 2009 | 1992 Toyota Previa

Not finding what you are looking for?
1992 Toyota Previa Logo

421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...