Question about 2005 Chevrolet Impala
Need Torque Specs for, Head Bolts, Rocker arm bolts, and Intake bolts.
Step one 37 ft lbs then tignten 120 degrees more
Step one 11 ft lbs then tighten 90 degresss more
89 inch lbs
132 inch lbs
Posted on Dec 02, 2008
Check online or ask your local dealership I am sure that they will help you.
Posted on Jul 08, 2008
Head bolts are supposed to be only used once is 65 ftp,,,i would suggest if you get them to 60ftp i would stop,,,it should be fine,,, start in center at 35ftp working your way around,,, and back and forth,,,after they are all at 35ftp,,then go to 60ftp the same way,,, see chevy headbolt tighting pattern for correct instalation,,,its more to it than just tighting them down,,, use a torque wrench
Posted on Mar 07, 2015
Tips for a great answer:
Dec 18, 2015 | Ford Cars & Trucks
Dec 18, 2015 | Cars & Trucks
Dec 01, 2015 | 1987 Oldsmobile Cutlass Salon
Apr 15, 2015 | 2005 Chrysler Pacifica
Mar 22, 2015 | 1995 Chevrolet Beretta
Nov 26, 2010 | 2004 Chevrolet Impala
Mar 12, 2010 | 1999 Chevrolet Malibu
Feb 06, 2010 | 1999 Buick Century
Dec 28, 2008 | 1998 Chevrolet Astro
3,660 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: