Question about 2006 Chevrolet Silverado 1500 2WD

1 Answer

Chevy Truck Silverado 1500, year 2002. Clutch pedal broke heard plastic crack where interlock switch goes through the fire wall it will not mount. Is there a kit to repair at home ?

Posted by on

  • 1 more comment 
  • Anonymous Aug 09, 2008

    i had the very same problem, i had to buy the same part made of plastic and install it, why doesn´t chevy make this part other than plastic.

  • Anonymous Sep 10, 2008

    Sounded like broken plastic when I pushed the clutch in and when the clutch pedal was released it was a couple of inches higher like a stop was missing. Everything still works OK

  • Anonymous Jan 29, 2009

    1996 Chevy Truck plastic piece to clutch pedal broken.Name that part is it a dealer item

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 255 Answers

Are you referring to clutch safety switch ?

shack

Posted on Apr 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My2002 sierra with a4.8 with a good battery, all my dash lights and cd player come on but the truck doesnt turn over right away sometimes it takes 5-10 minutes 2 start of repetitively turning key over


battrey is good but truck makes no sound and wont even click

www.cargurus.com > Questions > Chevrolet > S-10

CarGurusbattrey is good but truck makes no sound and wont even click ... Asked by Jennifer May 15, 2013 at 03:21 PM about the 2002 ... quite obviously the amps aren't getting through~ how do you know the battery is "good". the date ... If it turns over your power and starter are good but the ignition circuit ... Used GMC Sierra 1500".Missing: a4

Intermittant Failure to Start : Chevrolet Silverado 1500 ...

repairpal.com > Problems > Chevrolet > Silverado 1500
first start engine turns over alot. 2000 Chevrolet Silverado 1500. Hard start. When starting my truck it often takes two or three attempts. It kicks over but does not ...Missing: a4

Chevy Silverado and GMC Sierra Starting Problems - Car Forums at ...

forums.edmunds.com > Chevrolet > Chevrolet Silverado 1500

Oct 20, 2008 - 30 posts - ‎19 authors
i got a 2001 silverado 1500 and it wont start it turns over and fires and .... Put the key in and the truck barely starts due to the battery being weak. .... If it was really 8, the lights would be dim? .... I have a 2002 GMC Sierra 4.3L 2WD. ... I bled the fuel filter looking for air, but good fuel came out the top bleede ...Missing: a4

Jan 01, 2016 | 2002 GMC Sierra 1500

1 Answer

My 99 chevy silverado truck wont stay running and back fires


The P0141 means O2 Sensor Heater Circuit (Bank 1 Sensor 2)
The P0121 means Throttle/Pedal Position Sensor/Switch A Circuit Range/Performance Problem
The P0200 means Injector Circuit
The P0308 means Cylinder 8 Misfire Detected

Hope them can help you! Good luck!
______________________
car key chip replacement

Oct 09, 2012 | 1999 Chevrolet Silverado 1500

1 Answer

My cruise control on my 2007 chevy 1500 sometimes works and sometimes does not.


Hold your foot under brake pedal pulling up on it if this cures problem adjust brake light switch up a ways on fire wall side of pedal arm

Sep 24, 2012 | 2007 Chevrolet Chevrolet Silverado 1500

1 Answer

I have changed the 2 fuel pumps, filter, temp. switch, map sensor, plugs, wires, fuel pressure switch and the list goes on but when I put it in gear and start letting out on the cluch it looses fuel...


This is something I have not heard of before. I suspect it can have something to do with the Interlock switch on the Clutch pedal. Does the engine also cut out putting it into Neutral?
Check under your dash for switches on the pedal levers. Many times people get no-starts when a switch is dislocated by a shoe. Yours could be starting and then losing the Ground when the clutch pedal moves.

The Relays in the Powerbox for your fuelpump and Ignition may also be a good place to check too. Some of the Relay terminals are Ground terminals and once the truck is running the Interlock switch is not suppose to matter. The PCM is suppose to control the Relays and if a Ground is corroded the truck is searching for a Ground somewhere.

When I read your request I was wondering if the fuelpump is shutting off early causing your truck to cut out. The defect is loss of a Ground or power to the fuelpump.

Mar 14, 2011 | 1987 Ford Ranger

1 Answer

1992 Chevy Silverado - Clutch Slave Cylinder broke


JB weld will not work get it welded by a pro with the proper hi frequency welder otherwise you will have to replace the box ,and yes get a new cylinder ,hope you get sorted

Mar 03, 2010 | 1992 Chevrolet S-10

1 Answer

A/C problems


your a/c should not blow cold air-- is the switched turned on inside your truck - yes there needs to be a belt and it a round compressor with a clutch on the front of it - located on the front top side of your motor

Jul 02, 2009 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

2002 Chevy 1500 has problems shifting out of park


ck to make sure all brake lites are working. (could be faulty brake lite switch). if so, do you hear a click in column when applying brake to pull out of park? could be the start of bad shift interlock solenoid.

Nov 15, 2008 | 2002 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...