Question about 1996 Saturn SC

1 Answer

Door locks i need to take off the door locks and replace them with new ones.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You have to remove the outside part of the door panel. The screws are located around the edge of the inside panel. There is a pin in the outside handle that needs to be removed, prop it in the up position w/ a screwdriver handle or something, remove carefully if you can. The mirror comes off and a couple of more screws by inside handle ect. then you'll have both in and out off. Rather simple procedure if you're mechanically inclined.

Posted on Mar 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 buick century door wont open


Use a Slim Jim to pop the door open or have AAA do it for you. Once open take apart the interior side of the door to gain access to the door lock mechanism and reattach the control rods for the lock with new clips.

Jul 16, 2014 | 2000 Buick Century

1 Answer

I have a 2001 Chevy Monte Carlo ss the drivers side door lock button hasn't worked for sometime now. Can I just replace the lock/unlock button ??


Do you mean that you cannot lock/unlock the door with the central locking system?

If so you will need to have the actuator in that door removed and a new one fitted.

Dec 22, 2012 | Cars & Trucks

1 Answer

Find new door locks


What is wrong with them? For new ones you'd have to go to the dealer. Might be rather expensive. You need 2 or 4?
After 15 years on the road, locks get sticky, dry, stubborn. A little cleaning and lubricant often restores them.

Jun 15, 2012 | 1997 Mitsubishi Eclipse

1 Answer

The two rear doors on my new 2000 Ford Excursion will not lock. They do not lock when you press lock nor can you push them down to lock them.


Door latch inside door may be rusted, you can try taking off the door panels and spraying some penetrating fluid in them and working the lock rods manually and brake them free. The more likely fix may be to just replace them though. It is also possible that you need power door lock actuators also.In some cases, the actuator and latch are one in the same.

Jun 23, 2010 | 2000 Ford Excursion

1 Answer

My car door won't shut and lock. How can i get it


You may need a new latch assembly. Tr y prying a screwdriver in the old lock to see if it will fully closed upon forcing it. If it does latch you do need a new one. They generally wear out if the door hinges need attention or replaced. If the hinges are not tended too in about a year the latch wears out too

Jan 12, 2010 | 1995 Chevrolet Beretta

1 Answer

Driver's door on 1987 MB 190 cannot be locked w/the key


You didn't say if the key allows you to lock/unlock the passanger side door. If not, then your key is going bad. Otherwise, you need to replace the door lock tumbler. This is not to difficult, but takes about 2 - 3 hours to remove the inside panel and doorhandle assembly. Take pictures as you go to remember how to reinstall everything. You have a couple of options: 1. you can swap out the tumbler from the passanger side if it works, 2. you can replace the tumbler with a new one, or 3. you can replace the entire handle with a used one that has a key. With the amout of work into getting to the tumbler, my vote is for a new tumbler and key.

Dec 16, 2009 | 1990 Mercedes-Benz 190

1 Answer

Replace 2004 Hundai Sonata Door Lock Actuator?


take all screws of ,,then take screws of actuator and cables then remove it ,,put in new one put everything back together

Nov 27, 2009 | Hyundai Motor 2004 Sonata

1 Answer

Fixing new rear door to my Rav 4


H do you wanna sale your old door what rong with it?

Mar 11, 2009 | 2000 Toyota RAV4

2 Answers

The driver side door lock broke on my 98 jetta door want open


according to my partsman (who has had great advice for many years), you do not have to remove the door panel to replace the door handle which contains the cylinder lock. the handle is released with a screw which you can see when you open the door. you will need a starhead screwdriver or socket. A new handle costs around $40 at a parts store in my area. call around for a locksmith who will re-key your key to the new lock or use the key which comes with the new lock, your choice. i am in dealing with this also

Jan 02, 2009 | 1998 Volkswagen Jetta

Not finding what you are looking for?
1996 Saturn SC Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...