Question about 1996 Mercury Mystique

2 Answers

Mercury mystique 1996 water pump replace - 1996 Mercury Mystique

Posted by on

  • gerry bissi May 11, 2010

    what do you need to know?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

No its not the water pump. It sounds like you cooling fans are not coming on. Quick way to check this is to open your hood and turn on your a/c, the fans should turn on with in 20 seconds!!! If they don't you need a fan relay or a new fan hook a jumper wire to the fan if it comes on your good!!!!!!! And need a relay

Posted on Oct 10, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The temp in my car goes up when I'm not driving. idling. Do u think its the water pump?

Posted on Apr 05, 2009

5 Suggested Answers

  • 183 Answers

SOURCE: 1996 mercury mystique

Check for vacuum leaks.You can spray starting fluid around all parts of the intake.Observe idle as you do.If there is a leak the engine rpm will race higher.Also listen for hissing noise.Is the check engine light on?..If so what codes are stored..Good Luck!!!

Posted on Aug 04, 2008

  • 16 Answers

SOURCE: CHANGING WATER PUMP 96 MERCURY MYSTIQUE STILL

check for a bad head gasket

Posted on Sep 05, 2009

bschilz
  • 2049 Answers

SOURCE: how to install water pump on a 1998 mercury

Here is a link to a series of videos which will walk you thru the entire process...

http://www.wonderhowto.com/how-to/video/how-to-replace-a-water-pump-in-a-vehicle-102464/

Posted on Nov 29, 2009

ZJLimited
  • 17970 Answers

SOURCE: need radio wiring diagram (color codes) for a mercury mystique

I hope helps with this...

46240ad.jpg

Good luck (remember rated this help).

Posted on Jan 12, 2010

Testimonial: "Thanks a lot! Simple chart but will save me a lot of time!!"

  • 1 Answer

SOURCE: 1995 mercury mystique starter replacement process?

At first, it looks like an impossible task, however if you start by removing the positive battery cable, then unplug mass air flow sensor, carefully remove air filter box and its components from the throttle body. from there you should be able to see the starter better and have more room to work and get it out. You can take the battery right out if you want a little more working space for your elbows. take the wires off the solenoid, sometimes the old studs of solenoid will break due to corrosion. remove the two 13mm bolts that hold the startersome models have one at the bottom also that you will need to access from the bottom side.

Posted on Nov 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ok have 96 mercury mystique 2.0 engine drives good just changed water pump but drove it from mechanics to my house which is 7 miles got there temp gauge is stuck or not working but resevoir was boiling


may be you should make a diagnostic and you can do it in a garage or you can do it by yourself if you want to do it by yourself you need some tools and you can find some good ones here: diyobd2.fr

Feb 17, 2013 | 1996 Mercury Mystique

1 Answer

95 mercury mystique overheating and no heat, i hear air bubbles when the car is turned off


i ran into the similar problem it turned out to be the water pump the impeller behind the water pump had come lose and was not forcing the water to rotate the system.

Oct 18, 2011 | 1995 Mercury Mystique

1 Answer

Do you need to replace the timing belt when you change a water pump for a 1998 mercury mystique v6?


You don't have to replace it but you have to take the belt off to remove the water pump for the extra $30.00 i would recomend changing the belt too, unless the belt has been changed less then 20,000 miles ago .

May 09, 2011 | 1998 Mercury Mystique

1 Answer

I am trying to replace my water pump on a 96 mercury mystique. the hose that connects the radiator to the water pump is hidden behind the power steering pump, and the a/c unit, making it seemingly...


The a/c and p/s pumps have 2 bolts.One is a long bolt that runs throught the body of the pump and that is used as a pivot point to adjust the belt tensions.The other may be on a smaller bracket that locks the pump in place.Or it will have the second bolt just to firmly mount the pump.In the second there will be a pulley the keeps tension on the drive belt for the pumps.Before you remove the belt,draw all the pulleys and draw a diagram of the belt track so it is easy to put back on.You can remove the pump/pumps and swing it out of the way with all the hoses still attached.Hope this helps

Aug 29, 2009 | 1996 Mercury Mystique

2 Answers

Is the serpentine belt and the timing belt the same thing?


Your serpentine belt and timing belt are not the same thing. If your serpentine belt breaks, you will lose your alternator, your cooling system, air conditioning, and your power steering. In turn, it will leave you stranded in a very short period of time.

Jun 09, 2009 | 1996 Mercury Mystique

1 Answer

Smelled mild burning, lost antifreeze - engine temp Hot. I looked under car and noticed a serverly frayed Belt - NOT the big surpentine belt - another small belt on the driver's side. 1999 Mercury Mystique...


For the 1999 Mercury Mystique Water Pump Belt on 2.5L V6 Engine:

Probable Causes: Belt: worn out, started slipping. Overheating caused by failure of Belt. Lost antifreeze: caused by failure of belt, not turning Water Pump Pulley, not circulating anitfreeze, which resulted in overheating.

Click on the following free direct Link. It has the Serpentine & Drive Belt Diagrams and Tensioners for your 2.5L Engine.
Scroll down the Page (about 1/3rd down) to Diagram #G99H08189, it shows the specific Water Pump Belt.
Note the Tensioner.
http://www.2carpros.com/car_repair_information/year/1999/make/mercury/model/mystique/1999_mercury_mystique_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

Jun 03, 2009 | 1999 Mercury Mystique

1 Answer

1996 mercury mystique


Check for vacuum leaks.You can spray starting fluid around all parts of the intake.Observe idle as you do.If there is a leak the engine rpm will race higher.Also listen for hissing noise.Is the check engine light on?..If so what codes are stored..Good Luck!!!

Aug 04, 2008 | 1996 Mercury Mystique

Not finding what you are looking for?
1996 Mercury Mystique Logo

989 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...