Question about 1995 Pontiac Grand Am

1 Answer

How to remove power steering pump on a 1995 pontiac Grand am

Help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

MONKEY ARMS. if you have the tools and space take the sub frame loose under the car and lower the power train a little if needed to get easier access to the pump. if not just take the surpentine belt tensioner loose and remove the belt then take the frnt and rear fluid lines off drain and recover fluid and take the mount bolts off the top and bottom abd drop it out through the bottom of the engine bay.

Posted on Sep 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Video of replacing power steering pump 2000 Pontiac montanspa


Pontiac Grand Am/ Olds Alero 3.4 liter powersteering pump ...

? 16:26
https://www.youtube.com/watch?v=fhOaJUAgPTA
Jan 6, 2014 - Uploaded by JoeTheAutoGuy
this is a video on how to replace a power-steering pump on the Gm 3.4 ... My 2000 Olds Alero (2.4) power steering pump itself is fine, but the ...

How to Replace Power Steering Pump GM 3800 - YouTube

? 19:45
https://www.youtube.com/watch?v=-T8Kek90qAA
Sep 28, 2014 - Uploaded by Rich Rodgers
How to replace the power steering put on General Motor 3800 Engine. ... Sign in to add this video to a playlist. ... Power Steering Pump Pulley Removal and Installation ACDelco - Duration: 6:25. by MyPartsGarage 136,263 views ... How to replace a power steering rack and pinion on a 2005 Pontiac Grand ...

How to Install the Power Steering Pump - AutoZone Car ...

? 6:27
https://www.youtube.com/watch?v=PMX-dBhgwlo
Apr 19, 2012 - Uploaded by AutoZone
How to Install the Power Steering Pump - AutoZone Car Care ...Power Steering Pump Replacement 2000-2006 Chevrolet Tahoe, Suburban, ...

How to replace your power steering pump - YouTube






Dec 28, 2015 | Pontiac Cars & Trucks

1 Answer

Power steering leak in a 95 pontiac grand am


If you put in fluid & keep doing so,I have to ask why?

You surely can see & make the repair at the point of
fluid loss

Nov 28, 2012 | 1995 Pontiac Grand Am

1 Answer

How do i remove the power steering pump pulley off 2002 pontiac grand prix gt


can rent or buy a power steering pully puller from the parts store it has instructions on how to use and then remove it is also used to install the pully

May 19, 2012 | 2000 Pontiac Grand Prix

1 Answer

How do you take off power steering pump to get to water pump removel one bolt under steering pump


You do not need to remove power steering pump, you can rent a power steering pulley puller tool from most auto parts, just remove the pulley, its much easier and faster, they you can get to that end bolt on the water pump.

Oct 10, 2011 | 2004 Pontiac Grand Prix

2 Answers

I need to find out how to remove the power steering pump on a 2006 pontiac grand prix 3.8L


Power Steering Pump Replacement
Removal Procedure
1. Remove the accessory drive belt.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and wheel assembly.
4. Disconnect the power steering pressure hose from the power steering pump.
5. Disconnect the power steering return hose from the power steering pump.
6. Disconnect the harness connector (4) from the power steering pump (1).
7. Remove the power steering mounting bolts from the power steering pump.
8. Remove the power steering pump from the engine.
9. Remove the power steering pump pulley from the power steering pump.
10. Remove the power steering pump reservoir from the power steering pump.
Installation Procedure
1. Install the power steering pump reservoir to the power steering pump.
2. Install the power steering pump pulley to the power steering pump.
3. Position the power steering pump to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the power steering pump mounting bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
5. Connect the power steering pressure hose to the power steering pump.
6. Connect the power steering return hose to the power steering pump.
7. Install the harness connector (1) to the power steering pump (4).
8. Install the accessory drive belt.
9. Fill the power steering system with fluid.
10. Bleed the power steering system.
11. Operate the power steering system and inspect for power steering system leaks.

d2ff628.jpg
949e18c.jpg
a9ee201.jpg
*This originally came from abauto

Mar 24, 2011 | 2006 Pontiac Grand Prix

1 Answer

1995 Regal: replace power steering pump for 1995 buick regal...


how do I remove power steering pump on a 1996 buick grand sport

May 16, 2010 | 1995 Buick Regal

2 Answers

How to replace power steering pump


2004 Pontiac Grand Prix V6-3.8L VIN 2

Power Steering Pump: Service and Repair
Power Steering Pump Replacement
NOTE: The content of this article / image reflects the changes called out by TSB: 05-02-32-004.

Power Steering Pump Replacement
Removal Procedure
1. Remove the accessory drive belt.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and wheel assembly.
4. Disconnect the power steering pressure hose from the power steering pump.
5. Disconnect the power steering return hose from the power steering pump.
6. Disconnect the harness connector (4) from the power steering pump (1).
7. Remove the power steering mounting bolts from the power steering pump.
8. Remove the power steering pump from the engine.
9. Remove the power steering pump pulley from the power steering pump.
10. Remove the power steering pump reservoir from the power steering pump.
Installation Procedure
1. Install the power steering pump reservoir to the power steering pump.
2. Install the power steering pump pulley to the power steering pump.
3. Position the power steering pump to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the power steering pump mounting bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
5. Connect the power steering pressure hose to the power steering pump.
6. Connect the power steering return hose to the power steering pump.
7. Install the harness connector (1) to the power steering pump (4).
8. Install the accessory drive belt.
9. Fill the power steering system with fluid.
10. Bleed the power steering system.
11. Operate the power steering system and inspect for power steering system leaks.

d2ff628.jpg
949e18c.jpg
a9ee201.jpg

Sep 07, 2009 | 2004 Pontiac Grand Prix

1 Answer

Cant find the water pump on 1995 grand am se


I believe the water pump is located on the right side of the motor, if it is a 2.3L. right buy the power steering reserve. You might go out and buy a chiltons, my is very helpful

Apr 15, 2009 | 1995 Pontiac Grand Am

1 Answer

Power steering very hard


lift up the front of the car and see if you can steer the car on the tires. your [problem may be what mine was and the u joint on the tilt wheel is bad not the power steering at all. Hope this helps.

Sep 08, 2008 | 1995 Pontiac Grand Am

Not finding what you are looking for?
1995 Pontiac Grand Am Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...