Question about 1997 Hyundai Elantra

1 Answer

Water pump how to replace a water pump of Elantra?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,665 Answers

1. Drain the coolant and disconnect the coolant outlet pipe connection hose from the coolant pump. 2. Remove the drive belt and engine coolant pump pulley. 3. Remove the timing belt covers and the timing belt idler. 4. Remove the coolant pump mounting bolts, then remove the generator brace. 5. Remove the coolant pump assembly from the cylinder block. See an exploded view:
water pump - d0ab616.gif

Posted on Jun 27, 2008

  • Kleanthis Mavropoulos
    Kleanthis Mavropoulos Jun 27, 2008




    INSPECTION



    1.

    Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary.



    2.

    Check the bearing for damage, abnormal noise and sluggish rotation, and replace the coolant pump assembly if necessary.



    3.

    Check for coolant leakage. If coolant leaks from hole "A", the seal is defective. Replace the coolant pump assembly

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I own a 2003 Hyundai Elantra LX and currently have just over 63,000 miles. Is this the time that I should replace my timing belt? If so, would it make more sense to have my water pump done at the same...


Yes, you are just about spot on for the timing belt. Leave the water pump - if it ain't broke don't fix it. Changing the belts does not disturb the water pump so wait until it actually starts to leak, and that could be in years to come.

Mar 17, 2011 | Hyundai Motor 2003 Elantra

1 Answer

My 2000 Hyundai Elantra overheats. The thermostat, radiatior, water pump, timing belt and two sensors have been replaced with new parts. What is it causing to overheat?


do a presue test after engine is at normal temp . check for any leaks but am sure you blew your head gasket long before you replaced the other parts

Jul 26, 2010 | 2000 Hyundai Elantra

1 Answer

When my 2006 elantra is idle the hot air blowing out turns cold. Is this a common issue? What is the solution?


These cars use a thermostat that has a little check ball in it to let hot water past the thermostat to warm the interior even if the thermostat is not opened up yet. The ball could be sticking. Another possibility is that the fins on the water pump have corroded away, but your car isnt that old for that to have happened( I would hope) unless you have had your coolant replaced and whoever replaced it used city water instead of distilled water. Some water is acidic and could corrode internal parts. Alway use distilled water in a cooling system along with antifreeze.
Or you may have a loose water pump belt and at idle it is slipping.

Jan 06, 2010 | 2006 Hyundai Elantra

3 Answers

Coolant leak in the back of water pump.


replace water pump; sounds like it's coming from the weep hole(that's what it's called), because it starts like tears, and then comes the floodgates. your're gonna need a w pump.

Aug 29, 2009 | 2001 Hyundai Elantra

3 Answers

Replacement of timing belt for 2004 Hyundai Elantra


yes it is and u may need vavle and valve guides

Jun 28, 2009 | 2004 Hyundai Elantra

1 Answer

Maintenance schedule


If the water pump is driven by the timing belt replace it and anything else that is driven by the timing belt(idlers and tensioner) , Also replace the camshaft and crankshaft oil seals while your there.
Never hurts to flush the cooling system and add fresh coolant/anti-freeze.
Hope this helps

Jun 26, 2009 | 2004 Hyundai Elantra

1 Answer

Im replacing timing belt, accessory belts and water pump on my hyundai elantra gls 1997 sta wgn auto transmission. (1)Where is bolt to drain engine block coolant?(2)After removing front engine mountin


(1) No need to know if engine block coolant drain plug was available. Once the water pump was removed, all engine block coolant was drained. (2) After removing the three engine mounting bracket bolts, I also removed the mount bracket from the the body and made enough room to replace the timing belt easier.

May 18, 2009 | 1997 Hyundai Elantra

3 Answers

Do I change water pump when having timing belt changed


I would go to auto zone and get a diagram and the timing belt and do it yourself and the water pump (no it does not have to be changed everytime the timing belt is changed but if the car has over 60,000miles then it is best to change them both) it is not that hard especially if the car is not out of time just make sure you disconnect the negative side of the battery

Jan 21, 2009 | 2001 Hyundai Elantra

1 Answer

Does not heat in idle


is the heater fan working

Jan 20, 2009 | 2001 Hyundai Elantra

Not finding what you are looking for?
1997 Hyundai Elantra Logo

Related Topics:

1,042 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...