Question about 1985 Volkswagen Golf

2 Answers

Signal/hazard lights arite mate its a 1984 mrk 2 av got but still hope u can help my signal / hazord lights are'ent working do u know what rely it is a need to change as everythings writing in german and i can read it thanks for ur time

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you open you cubiel there should be a list of what each fuse do. my golf did exactly the same and i just changed the fuses and everything was correct

Posted on Jul 03, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 883 Answers

Relay 7...lower left corner of fuse/relay panel

Posted on Jun 27, 2008

  • Marty marty Jun 27, 2008

    please rate me solved...that is all I can find...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1984 chevrolet silverado high beams lights works and low beam lights, turning lights, emergency light and brakes lights don't work. I need help!


Those lights are on different circuits. The high and low beam lights are powered thru the headlight switch, the turn signals, brake, and hazards go thru the turn signal switch.
I would want to know if each circuit has power at the switch that controls it.

Jun 28, 2013 | Cars & Trucks

1 Answer

Turn signals will not work. replaced all bulbs, fuses, turn signal switch. I still have one bulb that does not work at all ie, when hazards light are on.


sound like either a bad wire or some have a fusible link that can go bad.
A faulty hazard switch which also has a built in relay like the turn signal, can cause problems as well.

Sep 29, 2010 | 1984 Ford F 150

3 Answers

The blinkers and flashers are not working on my 2001 Grand Cherokee. Can you tell me where to locate the relay or switch to replace? Its not the fuse, we checked that first. thank you


when you get in your car and use the car turn signals and it does not work from the inside or out side and your hazard light dont work to then you need to replace the fuse located inside the front hood in a black box or inside the car located under the stering wheel next to the gas and brake pedle on the side. Remove it and check the fuses and flasher relay. The flasher relay in a black square looking fuse that has 3,4, or 5 prongs. That is your problem of why the hazord lights and blinkers are not working, you can go to a part store to find the flasher relay for 9 to 15 dollars max. Napa has more of a selection. PS.... when you find the flasher and its burn out it is no good ; make sure the volts match!!!! If you buy a flasher and it burns out instinly after replaced then wireing is short and go with less volts you hace to ballance things of your car was worked on before, things where changed. Check you lights in front and back brights and dim, brakes and reverse lights. replace bulbs if needed could correct the problem if flasher still doesnt let blinkers or hazord work. If bulbs where replaced and still no blinkers or hazord lights then you need a new or used (another) switch nob. You can go to a local junk yard and take off what you need off the same car you have and pay for it then replace it on your car. Or you can go to amazon ebay or such to find. If you are a WOMEN or OLDLADY or some one not good at removing parts then this is not your job. Find someone who can help, or pay something that could be so easyily done. I hope this solves your question.

Mar 31, 2010 | 2001 Jeep Cherokee

1 Answer

My signal lights or hazard lights don't work. What could it be?


G'day mate sounds like the "Flasher can" could be an intergrated unit ( like mercedes )part of the hazard light switch,

Mar 29, 2010 | 2003 Hyundai Tiburon

3 Answers

Hazard flashers do not work. Turn signals do. Changed relay. Nothing. Ugh. 1992 oldsmobile cutlass supreme


You changed the hazard flasher or the turn signal flasher? It has two, one for the hazard and one for the turn signals

Aug 31, 2009 | 1992 Oldsmobile Cutlass Supreme

2 Answers

Turn signals work, but won't stay on. Where is my


check the bulbs, and fuse and raley. the raley is locate in the engine compartment.

Jul 30, 2009 | 2001 Saturn SL

1 Answer

I have a 1984 Mercedez-Benz 300 SD Turbo Diesel. The emergency hazards lights would not go off after the red botton was pressed completly through the control panel. We tried to pull the fuse to force em...


Your turn signals and hazards operate on the same circuit...... thats why you lost turn signals when you snipped the wires behind the hazard switch...

your hazard switch is faulty, stuck in an open loop (always on).......replace it

ebay is best, if not then Autohaus AZ


You should join www.benzworld.org sub group W123
Nice folks, good advice, that manual your looking for, and a whole lotta free info

Dec 11, 2008 | 1984 Mercedes-Benz Mercedes Benz 300 Class

1 Answer

Signals wont work and the 4 way hazard lights don't work. all other systems are working fine. fuses are good.


I had this problem with my 85 tercel. I had to take it to an auto electrician who traced the wires for me. Basically one of the wires running to the driver side turn signal was shorting out causing no signals to work. Also check your bulbs because if one bulb goes out it effects the others.
Hope this helps!

Aug 06, 2008 | 1984 Toyota Tercel

1 Answer

Headlights and turn signals


make sure to have a good grown going to the hazard light that seems to be the problem

May 30, 2008 | 1984 Ford F 350

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...