- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This sounds like a bad lock actuator, this is the part that locks the door with the power locks button or the remote. you will need to remove the rear door panel and dissconnect the actuator, this way you will be able to lock it with the key but the power lock will not work on the door,
You will probably need assistance with the repair, but first try this. Spray some spray lubricant like WD40 into the keyhole on the exterior using the tiny straw provided with the lubricant can. Try locking and unlocking manually using your key in the outside key lock and try activating the handle to open the door while you have someone pull in and out on the door. Once it's open, you may need to remove the interior panel to see if something is rusted, worn or bent.
yes there is if you drop down the glove box lid and remove the bolts holding the fuse box. unclip the fues box and pull it down. turn the fuse box around and there is a fuse on the back (i thing its a 15amp)
this is the other fuse for the central locking.
please let me know if this helps
big mike :)
go on ebay to by the key and then get it cut at like target or walmart...
once you get the new key...
1-insert and remove key from ignition two times
2-close and open driver door two times
3-insert and remove key once from ign.
4-close and open drvr door twice
5-insert key into ign.,then close driver door
6-turn key to on (not start) then off, twice this is rewrite mode
7-remove key from ignition,the door locks should cycle twice.if not start over.it may take a few tries.
8-press lock/unlock together and hold for a second
9-release,and press lock on remote,the door locks will cycle
confirming program.continue to do other remotes you have,steps 8 and
9.if only one in possession,you are done. To end mode open door or insert key into ignition.
You'll need to follow the steps with no more than a 1-2 second delay between each step.. hope it works