Question about 1994 Toyota Pickup
Check your connections first, I had the same problem, replaced the starter and same thing, had lots of corrosion on negative connection point, recut the line and recrimped, and started like it was new.
Posted on Apr 09, 2009
The starter solind is sticking try taping the starter and see if it works if not replace or check starter realey
Posted on Jul 30, 2008
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
can be faulty ignition lock cylinder. I suggest to wiggle the steering wheel
a bit and see if the key turns to start mode. If that is not helping
then first turn steering wheel to right and try , or next turn
steering wheel to left and see if you can turn the key.
wd-40 in the ignition key hole and let it remain there for few minutes, after
that once again try to turn the key and see if that helps.
if that is not helping then ignition lock cylinder has to be removed out and
more troubleshooting on these types of issues, I suggest you to click the help
link mentioned below. Its the accurate solutions mentioned in it. That will
help you to narrow the problem: -----
the link below: ------
These will help.
Feb 04, 2013 | 2004 Chevrolet TrailBlazer
Oct 12, 2011 | 1998 Chevrolet Cavalier
Nov 19, 2010 | 2002 Chrysler Voyager
Sep 06, 2010 | 1995 Chevrolet Camaro
Aug 20, 2010 | Acura RL Cars & Trucks
Jan 29, 2010 | 1996 Ford Ranger SuperCab
Jun 05, 2009 | 1997 Honda Passport
136 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: