Question about 2003 Chevrolet Venture Passanger

1 Answer

Chevy venture lh tail light wont show brake light.. Regular light comes on. Replaced tailight circuit board still no braking light. Do i trace down to correct wire and try to replace to god knows where or do i get a mechanic to fix ? Right side works fine.

Posted by on

  • 3 more comments 
  • gjmelrose Aug 11, 2008

    2002 Venture, brake lights don't work, tail lights do. Replaced brake light switch to no avail. Dealer contacted claimed problem wasn't a frequent one but there have been others. No recalls. Probably a wiring problem.

  • williamjohns Aug 12, 2008

    2002 Chevy Venture - Passenger break light doesn't work. The top and bottom tail lights, turn signal, and back-up lights works, just not the break light.

  • omegambc Aug 15, 2008

    thanks , for me it was fuse,also had to place bulbs in tightly

  • Anonymous Mar 16, 2014

    i have a 02 acura tl s the tailight is out but the brake light works fine how can i fix this problem only half the light lights up

  • Anonymous Mar 25, 2014

    brake lights and tail lights stopped working

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Solution to your problem ... 1- I purchased from 1aauto.com a pair of Circuit Boards for my Chevy Venture 2003 for 85.00 $ ..free shipping 2 - I Installed them both , all lights now were not working at all. So I checked them and they were all burned ...So I purchased new ones ....Everything was working fine now but now my signal lights were not working left and right .....Checked the fuse box next to the passenger side door .... It was burned . Changed the fuse / Signals are working fine now ....All is good I just did this yesterday evening August 12, 2008 Conclusion ..Change everything going forward so you do not need to run around like I did from one store to another!

  1. Circuit Board : New
  2. Bulbs : New
  3. Fuses : New
Thank you

Posted on Aug 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the tail light fuse?


Rear Lights May Be Out Due To Failed Light Socket Plate ...

repairpal.com > Problems > GMC > Envoy
no tail light on passenger side. replaced tail light circuit board, fuses and bulbs. I havebrake lights ... 2003 GMC Envoy75,000Visitor. My brake light got ... How do I replace the high mount third brake light on a 2002 gmc envoy? The light does ...

Chevy Trailblazer- No Brake Lights! It's an easy fix.. - YouTube

? 12:22
https://www.youtube.com/watch?v=m0GkI5Jmrgo
Sep 7, 2014 - Uploaded by CheapGeek
My 2008 Chevy Trailblazer had no brake lights! It was ... Chevy Silverado 88-98 brake light switch replacement GMC Sierra tahoe Suburban ...

GMC Envoy XL: brake lights..the fuses and the bulbs..lights ...

www.justanswer.com > GM
images for 2003 gmc envoy wiring

Jan 17, 2016 | 2003 GMC Envoy

1 Answer

I have a 2002 GMC 1500hd 4x4 6.0 gas engine. Have no break lights. Tail lights and turn signals work fine. Replaced fuses and stop light switch and still have no break lights


GM had a lot of problems with the circuit boards that house the rear lights. My suggestion is to use a test light clip one end to the trucks body parts then remove brake light switch the orange wire should light the bulb on test light this is the power wire, the white wire is the stop light circuit with switch out this also should be lite up. Drop down turn signal switch connector the brake lamp wire goes up the turn signal switch and comes back down the yellow and green wires no power there it is a bad turn signal switch. If Ok Now remove one tail lamp assembly unplug harness and test for power if still have no power trace wiring back to fire wall and check at bulkhead connector. IF ok then circuit board is bad.

Nov 11, 2013 | Cars & Trucks

1 Answer

1993 chevy silverado parking lamps go of when i turn on headlights, signal lights flicker when i press on brake.


Yes I would look for a ground circuit problem. I would look at the ground wires for the headlights first. Even run a new ground wire for the tail lights to see if it helps.
Could be a ground connection for the body to frame or body to battery.

Aug 10, 2012 | Chevrolet Silverado 1500 Cars & Trucks

2 Answers

Center brake light working but neither tail light brakes working both bulbs good


the center and brake light are not on the same circuit, check voltage coming from the switch

Mar 28, 2011 | 2001 Dodge Durango

1 Answer

Can't get 1998 Chevy Pickup 1500 out of part also has no back up lights. Have already replaced brake switch and Park Neutral Safety switch but still have problem. Any advice?


Have you checked to see if the fuse is blown? The brake lights have to work to get the truk out of park as thepower from the switch opens the gate in the steering colum to let the shifter into gear.the brake light fuse is in the underdash fuse panel. while checking fuses check them all as some circuits effect others so any blown fuse can cause this problem eventhe fuse panel under the hood. The tailight circuit boards are well known to fail and cause blown fuses so unplug the tailights at the light change the fuse and try to ge it out of park If it works plug one at a time the tailights in and you'll find your problem the circuit boards are a common problem so they can be aquired at most parts stores.

Mar 01, 2011 | 1998 Chevrolet K1500

1 Answer

My tail lights have stopped working. left blinker is working but very dim


A common issue are the boards that the tailights and brake light bulbs plug into But you may want to check and make sure that all your other parking lights come on just to make sure a fuse didn't blow on you. Before doing anything else with the boards check those particular bulbs out to make sure didn't burn out on you.

Sep 11, 2010 | 2000 Chevrolet Venture

1 Answer

No brake or tail lights


check the pigtail connector that attaches to the rear brake circuit coards. Unplug for the circuit board and check the plug for errosion/melting. If this 6 pin connector needs replaced it's pretty easy. I got mine at Amazon for about 30 each and totally solved the problem. AC Delco PT 246 is the part I believe for the 2001 year chevy venture van

Jul 11, 2010 | 2000 Chevrolet Venture

2 Answers

The left rear tail lights do not work. the Brake


most have a computer board built into the tail light it could be bad

Mar 07, 2010 | 1999 Chevrolet Tahoe

3 Answers

Brake lights don't work. Replaced bulbs, checked


Yes, you need to of course check the voltage coming into and going out of the brake light switch, if 12 Volts are there going out and coming in while pressing on the brake pedal, your brake lights aren't getting a good ground or there is a break in the circuit between that switch & the lights.

On occasion the tail lights will work with a weak ground circuit where the Brake lights won't. Best way to determine this is to just hook up the 12 volt tester to the Brake light hot wire & there at the bulb ground, then in an area away from the bulb that has a good possibility of contact/ground.

Really that's it, if the 12Volts is getting to the bulb but it isn't lighting, if you aren't getting the voltage there and the brake switch is hot on both sides when pressed, the break in voltage will have to be traced from that switch to the tail light to find the problem.

good luck.

Feb 22, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

Only one tailight works. replaced bulb. brake lights work turn signals work driver side tailight works no tailight on passenger side.


i think you'll find with a test light at the tail light connector,that the you do have power but the problem is the unit that holds the bulbs and is a printed circuit is bad

Dec 07, 2009 | 2000 Chevrolet Silverado

Not finding what you are looking for?
2003 Chevrolet Venture Passanger Logo

470 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

66744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...