Question about 2000 Toyota Tundra

1 Answer

Access to tighten my antenna

The antenna on my 2000 Tundra is loose and I can't figure out an easy access to tighten it.

Posted by on

  • Anonymous Sep 25, 2008

    Loose antenna.

  • Anonymous Mar 22, 2014

    How to tighten loose antenna

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 962 Answers

Is it a power antenna ? or a regular antenna ? you may have to remove the wheel well liner to acess the antenna.Remove the clips that attach the liner.Hope this helps.

Posted on Oct 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I tighten my antenna holder


remove plastic fender guards and reach through with pliers or needle nose vise grip and tighten

Jan 27, 2011 | 2000 Toyota Tundra

1 Answer

How to replace alternator on 2007 toyota tundra


Hi. Please see procedure below:

Determine which alternator your Toyota Tundra will need. You'll want to be sure the new alternator is compatible with your Tundra's engine. Models built from 2000 to 2004 have a 3.4 L or 4.7 L engine. Models made from 2005 to 2006 offer options for a 4.0 L or 4.7 L engine. Starting in 2007, the Tundra is available with 4.0 L, 4.7 L and 5.7 L engines.

Disconnect the negative battery cable with a socket wrench. Remove the gravel shield if you need to access the alternator from under the car. Remove the electrical connector and unfasten the retaining nut on the alternator terminal with a socket wrench. This will allow you to remove the battery terminal wire.

Unfasten the lock nut, pivot bolt and adjusting bolt on the alternator with a socket wrench. Remove the drive belt and take the alternator off the vehicle.

Install the new alternator assembly. Use a torque wrench to tighten the lock nut to 25 ft. lbs. and the pivot bolt to 38 ft. lbs. Attach the adjusting bolt.

Connect the electrical harness and battery terminal wire to the alternator and fasten the retaining nut to the alternator terminal with a socket wrench. Install the gravel shield if you removed it. Replace the drive belt and restore it to the proper tension. Reconnect the negative battery cable with a socket wrench.

Thanks!

May 25, 2010 | 2007 Toyota Tundra

2 Answers

Rear window loose


Check with Ford for recall info. There were a few years the rear window hinges were defective and recalled.

Mar 24, 2010 | 1999 Ford Explorer

1 Answer

How do you change the headlight bulb in a 2000 Audi A4 Quattro?I don't want to screw it up by doing it wrong.


You need 25cm long Torx 30 srewdriver. There are 4 bolts open top ones (easy to access) and loose ones behing light.
Then light moves outand you can access to light bulb. It is not easy to do but when you have done it once then youknow what it takes. Be carefull not to break light vertical adjustment motor.

Nov 13, 2009 | 2000 Audi A4

1 Answer

I have a Saturn 2002 coupe and the antenna is loose. How can I tighten it without taking off the front panel?


The base of the antenna should be nut shaped so you can tighten it with a wrench

Sep 08, 2009 | 2000 Saturn SL

1 Answer

Loose Wing Mirror Case


You will only find out,once you have removed the cover, on the in side, of the door.
That will then gain you access to see whats required.
Good luck

Jul 15, 2009 | 2000 Volvo V70

1 Answer

How to replace thunderbird antenna


please rate service.

Automatic Electric Antenna
Removal
  1. Lower electric antenna (18850) .
  1. Remove rear retaining screws of RH front wheel splash shield for access to antenna lower retaining bolt.
  1. Remove lower retaining bolt.
  1. Remove radio antenna nut (18865) from top of motor tube and remove electric antenna through fender/splash shield access.
  1. Disconnect signal cable and motor wire connector(s).
Installation
  1. To install, reverse Removal procedure.
  1. Tighten top radio antenna nut to 6-8 Nm (54-70 lb-in).
  1. Tighten lower electric antenna retaining bolt to 5.8-7.8 Nm (51-69 lb-in).
  1. Check operation of electric antenna and radio chassis .

    Automatic Electric Antenna


    1faf511.gif

mast
Mast, Power NOTE: A power antenna mast which is bent or broken can be replaced without replacing the motor and tube assembly.
Removal
  1. Remove radio antenna nut (18865) and radio antenna stanchion (18919) .

    ssd~us~en~file=l6389b.gif~gen~ref.gif

  1. Loosen retaining nut inside tube using 14 mm (9/16 inch) socket, and slide nut part-way up mast.
  1. Raise antenna to run plastic drive wire at bottom of mast out of motor. Note direction of teeth on plastic drive wire.
  1. Saw off damaged portion of antenna mast. Remove burrs from mast and slide nut and contact tube off stationary tube.
Installation
  1. With the teeth on the plastic drive wire facing toward motor on antenna, push end of plastic drive wire of replacement mast assembly down into tube. Push it around curve at bottom of tube until end enters drive mechanism.
  1. Run motor down while pushing on plastic drive wire until about 305 mm (12 inch) of wire has been drawn into the tube. Stop motor and insert bottom of antenna mast into tube. Lower mast.
  1. Slide contact tube and radio antenna nut down antenna mast. Tighten nut to 0.45 Nm (4 lb-in).

  2. Raise and lower antenna several times to ensure proper operation.
651247a.gif

Jul 09, 2009 | 1995 Ford Thunderbird

2 Answers

Periodic power loss to ignition on 2000 Tundra.


Check the connections on the battery,It sounds like one or both may be loose.

Jun 02, 2009 | 2000 Toyota Tundra

1 Answer

Take out dash(tundra) for antenna installation


You could do an antenna installation without removing the dash. Take out the center assembly with the radio and hvac controls and the glove box. You'll have enough access to run the antenna wire from its stock location to the radio.

Mar 31, 2009 | 2004 Toyota Tundra

1 Answer

Chatter when turning


The serpentine belt should not have to be tightened because ther is a tensioner to keep it taught. If it feels loose then you need to check the tensioner and also see if the belt stretched. I hope this helps.

Jan 08, 2009 | 2007 Toyota Tundra

Not finding what you are looking for?
2000 Toyota Tundra Logo

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...