Question about 2006 Suzuki Forenza
2006 suzuki forenza, the headlight in the passenger side is burnt out.How do I replace it at home? Thank you in advance, L.Turner
Hi, I have done this many times before for my 2006 Suzuki Forenza. You will need a 10 milimeter socket wrench for the top two nuts and a 8 milimeter socket wrench for the nut located directly behind the highbeam light. After removing the nuts carfully tilt the head light upward and wiggle out. After moving it halfway, disconnect the two wires connected to the housing. Be careful not to scratch the trim located around the grille. The bulb has a rubber gasket over it. Remove turning counter clockwise. Then, with your index finder slightly push the metal bracket holding the bulb in place down and then release. Install a new bulb making sure not to touch the glass part of the bulb. Reinstall the rubber gasket and carfully put the light housing back into the car. Line up all holes before attempting to replace the nuts. Do not tighten them too much. Only until they are slightly snug. This housing is plastic. So be carful. Then you are finally done. One thing to remember. It's usually better to replace both headlights at the same time for optimum performance. If cost is a factor, one can be done, but you will notice a difference in brightness.
Posted on Aug 22, 2008
Tips for a great answer:
Oct 06, 2014 | 2005 Suzuki Forenza
Feb 02, 2014 | 2006 Suzuki Forenza Wagon
Apr 05, 2013 | 2006 Suzuki Forenza
Jan 01, 2010 | 2006 Suzuki Forenza
Sep 22, 2009 | 2006 Suzuki Forenza
Apr 12, 2009 | 2006 Suzuki Forenza
Mar 16, 2009 | 2004 Suzuki Forenza
424 people viewed this question
Usually answered in minutes!