Question about 2001 Chevrolet Malibu

1 Answer

2001 malibu shifts rough

Car shifts (clunks) into reverse and drive.
Diagnotic code P0113 states intake air temp cicuit high input
I don't understand what that means.
Had this problem about 2 weeks ago. Moved some wires back and
forth under the hood and it was ok, but now it's back and moving the
wires didn't help this time.
Any suggetions?
Thanks in advance or your help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

Code p0113 means: IAT sensor high temp

and the solution:
The Intake air temp sensor is located inside the air flow meter and uses yellow and black wire and the black wire. IAT sensor circuit code P0113 indicating excessively high voltage or (Open Circuit) the ECM is either not seeing the correct voltages at terminals 66 and 80 under the dash at the ecm. It could be as simple as a broken wire under the insulation right at the air flow meter, Or a little worse a bad air flow meter. There are cheeper remanufactured Aair flow meters available at Nissan for your car around $150 instead of $400 like they used to be new.

Posted on Jun 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why dose my chevy cavalier 2.2l 2004 get a code p0113 and says hight sircute


My info says that is the code for intake air temp sensor. Two wire connector, one wire is tan and the other is black. I don't know if replacing the sensor will fix, possibly?
26292268-bbx0rsqpcwc3ottumqh2lfhq-3-0.jpg

Sep 26, 2016 | 2004 Chevrolet Cavalier

1 Answer

I am having a code P0113 and the car is using up too much gas


P0113 is an Intake Air Temp High Input error. High input in this cause, means the voltage sent to the PCM from the sensor is too high. This makes sense since the higher the voltage the PCM seem the lower the intake temperature seems to be to the PCM. Colder temperatures will cause the PCM to increase the fuel to the engine (like the old style choke/fast idle). You need to check the wiring to the Intake Air Temp Sensor, and if it is OK, replace the sensor.

Dec 18, 2013 | 2003 Nissan Altima

1 Answer

Codes p0203, p0123, and p0113 are showing for my 2001 jeep grand cherokee. The voltage from the tps plug was 1.5v


P0113 intake air temp voltage too high
P0123 Throttle position sensor voltage too high
P0203 is injector #3 control circuit
voltage is higher that 4.9 volts short to 5 volt supply circuit

erase the codes and drive vehicle to see if the codes come back if they do you have a hard code check the supply circuit for a short

Nov 11, 2013 | 2001 Jeep Grand Cherokee

1 Answer

P0113 is what is stated on the service code. what does it mean?


P0113 -

Intake Air Temperature Circuit High Input

It looks like it is related to the IAT sensor or circuit.


For more info, go to this web site/link:

http://www.obd-codes.com/p0113

Jul 09, 2011 | 2005 Ford Escape

2 Answers

Took my focus 2003 to autozone it is going thru alot of gas and we changed the spark plugs they ran a test and the codes are po113 & po303 i do not know what this means can you help me


P0113 indicates the IAT Intake Temperature Sensor has a problem.
P0303 indicates a misfire on cylinder 3

I believe the IAT is built into the MAF sensor located in the air snorkle and helps regulate the air/fuel mixture. Also concentrate on cylinder 3 looking for problems such as injector, wiring, etc.

Hope this helps!

Audie

Dec 10, 2010 | 2003 Ford Focus

1 Answer

Where is the p0113 located? Do you have any diagrams showing this for a 98 Ford Taurus?


The P0113 code is a intake air temperature high input. Your intake temp sensor is located after the air filter in the air cleaner housing.

Oct 17, 2009 | 1998 Ford Taurus

2 Answers

Same


po113 is--IAT sensor curcuit high input, po403--egr curcuit flow malfunction. IAT is intake air tempurature curcuit, for egr take off and clean carbon build up from inside of engine to egr valve.

Jun 06, 2009 | 1999 Chevrolet Malibu

2 Answers

Codes p0113 and p1111


p1111 is iat sensor curcuit 1 high input. hope this helps.

May 07, 2009 | 2001 Chevrolet Malibu

2 Answers

I am looking for the meaning of P O 113 on the trouble shooting


the meaning of the code is > intake air temperature circuit high input , .

Jan 19, 2009 | 2001 Pontiac Grand Prix

Not finding what you are looking for?
2001 Chevrolet Malibu Logo

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...