Question about 1997 Honda Accord

1 Answer

A/c evaporator hi there, are there any instructions on how to replace a/c evaporator on a 1997 honda accord? It's leaking. thanks

Posted by on

  • Anonymous Jul 13, 2008

    my a/c wasn't working. i was told by a mechanic that my evaporator core is leaking freon.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

IF --its clear and dripping out of your car when the A/C is running its most likely only condensate--Water--this occures as the air conditioning systems collects moisture on the cooling coils (evaparator)the fan blows across the coils causing the condensate to thaw. Its like when ice melts and the water runs off.

Posted on Jun 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dtc p1457,0107


P1457 HONDA - Evaporative Emissions Control System Leakage EVAP Canister Systemxicon.jpghttp://engine-codes.com/p1457_honda.htmlForum CodePossible causes- Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap There is a Honda factory service bulletin with information on how to diagnose the P1456 on the following Honda models:
1998 Honda Accord
1999 Honda Accord
2000 Honda Accord
1998-2000 Honda Accord
symptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Possible a noticeable fuel odor caused by the release of fuel vaporsP1457 HONDA Description The evaporative emission (EVAP) control system stores fuel vapor from the fuel tank in the EVAP canister temporarily to prevent it from escaping to the atmosphere and to enable it to be drawn into the engine by intake manifold vacuum and burned. In addition, the onboard refueling vapor recovery system (ORVR) stores fuel vapor generated when refueling in the EVAP canister.

The EVAP control system leak detection method improves the accuracy and frequency of the detection by determining faulty components and vapor leakage for each part. The EVAP control system (from the purge valve to the fuel tank) is divided into two parts. One is the "EVAP Canister Side" (from the EVAP two way valve to the purge valve) and the other is the "Tank Side" (from the EVAP two way valve to the fuel tank). There is 0.04 inch leak detection and 0.02 inch leak detection. If the 0.04 inch leak detection results are OK, the 0.02 inch leak detection runs. The P1457 code is detected when the EVAP system has a very small leak.

P0107 HONDA - Manifold Absolute Pressure Sensor Circuit Low Voltagexicon.jpghttp://engine-codes.com/p0107_honda.htmlForum CodePossible causes- Manifold Absolute Pressure harness is open or shorted
- Manifold Absolute Pressure sensor poor electrical circuit connector
- Faulty Manifold Absolute Pressure sensor
- Faulty Engine Control Module (ECM) When is the code detected?An excessively low voltage from the sensor is sent to ECMSymptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Engine rough idle
- Engine hesitation
P0107 HONDA Description The Manifold Absolute Pressure sensor provides instantaneous manifold pressure information to the engine's Engine Control Module. The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow sensor to detect the intake airflow. A typical configuration employs one or the other, but seldom both.


In some vehicles the absolute pressure sensor is built into ECM. HONDA Technical Service Bulletins for P0107 code1999 HONDA ODYSSEY Electrical System 2000 HONDA ODYSSEY Electrical System1998 HONDA ACCORD Electrical System 1999 HONDA ACCORD Electrical System 2000 HONDA ACCORD Electrical System 2001 HONDA ACCORD Electrical System 2002 HONDA ACCORD Electrical System 1996 HONDA CIVIC Electrical System 1997 HONDA CIVIC Electrical System 1998 HONDA CIVIC Electrical System

Jul 25, 2012 | Honda Civic Cars & Trucks

1 Answer

Leaking water in the floor


Scientists think that water came to Earth from comets. There's a whole explanation of the hydrological cycle that shows how water is evaporated from the oceans and comes back to earth in the form of rain. Your other question: yes, I "run air condition".

Your drains are blocked by leaves and ****. Google: "1997 Accord air conditioning drain location" and then you'll need to poke a thin wire or other unblocker to fix it.

Jun 21, 2012 | 1997 Honda Accord

2 Answers

1997 Honda accord ex leaking water from blower motor


if you are running your A/C or the windshield defrost function it may be a hose that has come loose from the A/C evaporator housing (which is attached to the blower motor housing).
Otherwise... it sounds more like an issue involving the heater core !
Does the smell of the liquid smell sweet?

Oct 19, 2011 | 1997 Honda Accord

1 Answer

I have a 1994 Honda accord lx when i push the breaks i here a hissing sound like it is leaking around the breaks and i notice the breaks dont work as good now what could it be?


Hi, the sound is vacuum leaking thru a torn diaphram in the brake booster. You will need a new booster. Please let me know if you need instructions for replacing the booster, and thanks for using FixYa.

Feb 24, 2011 | Honda Accord Cars & Trucks

1 Answer

1997 honda accord is leading oil


mainly oil leaks are caused by a bad gasket....you can try to replace it if you want, but its recommended that you take it to a car shop...if the leak is bad enough

Jul 21, 2010 | 1997 Honda Accord

2 Answers

Can't find the A/C leak on my 96 honda accord. Pro mechanic used dye and can't find it.


You need to use a UV light to see the dye. The most common leak I have run into are in the condensors. If you still can not see the dye with a uv light suspect a leaky evaporator core.

Jun 07, 2010 | 1996 Honda Accord

1 Answer

Repair instructions for a leaking power steering pump on a 1997 honda accord. leaking from the shft bearing behind the pulley. need instructions to replace the oil seal.


Not a simple job unless you have proper tools. You'll need a gear puller to remove the pully and a compressiondevice to install the seal and retaining ring. Try a auto junk yard for a used pump. It'll be cheaper and a simple bolt on job.

Feb 22, 2010 | 1997 Honda Accord

1 Answer

My 1997 Honda Accord makes a noise when I back up. The auto guy said it was the brakes and we replaced the brakes, yet it still makes the noise. Next my car has multiple leaks because it is an old car with...


you need a new intakemanifold gasket, and oil pan gasket, and the filler neck for the gas. all easy repairs. but the grinding noise? make sure you replaced the rear brakes if equiped or drums if not.

Nov 23, 2009 | 1997 Honda Accord

Not finding what you are looking for?
1997 Honda Accord Logo

Related Topics:

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...