-   2001 S60 but the car will randomly not start (completely shuts the car down electrically) when I turn the key in the ignition. Repair shop is telling me the alarm siren needs to be replaced, which is causing the electrical shut down. Does anyone have a way to bypass?-   songbirdg
Jan 25, 2009
-   I have a 2001 Volvo s80 that won't start. I do have fuel and spark. Does anyone know if the alarm system has anything to do with the engine starting. I had a saab that I excedently trip the alarm and it shut down the engine. Does any one know if it has a alarm module?
-   chowee
Dec 15, 2008
-   alarm low sounding mode, goes off after the car has been locked-   Guest
Sep 23, 2008
-   any progress on this matter?-   sdjefersky
Aug 21, 2008
-   I have shut off the motion alarm but the alarm still goes off any time , night or day
-   tpierce110
Have the codes read out for the vehicle. It is likely that the siren for the alarm is causing the false alarm. If the siren is bad, there will be a code set in the central electrical module. (CEM)
The guages on my dashboard flicker then they freeze and unfreeze and finally shut down. The next...
(More)
The guages on my dashboard flicker then they freeze and unfreeze and finally shut down. The next morning,...the same thing. Each time however the airbag service message appears.
Can I use 215/65 R16 Tires on a 2003 Volvo S80 T6? What Will a bolt pattern of 16? X 7J X 49+ offset...
(More)
Can I use 215/65 R16 Tires on a 2003 Volvo S80 T6? What Will a bolt pattern of 16? X 7J X 49+ offset fit this vehicle ?
The clock on my Volvo S80 is only reading --/-- and try as I may, I can't get a display to appear...
(More)
The clock on my Volvo S80 is only reading --/-- and try as I may, I can't get a display to appear when using the little knob next to it. Any ideas, short of removing the whole dash and replacing it?
Volvo S60 halogen daytime running light connectors are burnt and cause a error message on the...
(More)
Volvo S60 halogen daytime running light connectors are burnt and cause a error message on the dashboard display. I could easily splice in new connectors and treat them with anti-oxidant lube. BUT, where the heck do I get new connectors? Ceramic connectors would be best!
I had the transmission replaced, and a new computer put in and software downloaded. After a week my...
(More)
I had the transmission replaced, and a new computer put in and software downloaded. After a week my transmission service urgent message popped up, and the diagnostics came back with failed master switch and failed pressure cellunoid B. Both are brand new and working fine. What could be causing this?