An expert who has achieved level 2 by getting 100 points
An expert who has answered 20 questions.
An expert that has over 10 points.
An expert whose answer got voted for 2 times.
Re: no tail lights
Check for voltage at the lights if none there check for voltage comming into and out of the tun signal switch if if goes into the switch but not out then the switch is bad also check all fuses first!!!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Not sure I follow your story.
The front and rear turn signal should blink on one side. If the tail lamps are not working, it could be a fuse or a problem with the wiring. And the tail lamps are on the same circuit as the front parking lamps.
Open the tail gate, and you will see on the side of the tail light housing two screws that you will need to unscrew in order to take the housing out. If it is the tail light ,that is on the actual gate, open the tail gate and remove the plastic bed liner there are few of screws that need to be removed. Hope this helps you fix it.
more than likely blown fuse the dash lights will not work if the tail lights blow a fuse in most cases and that will let you know the tail lights are not working, same if a blinker is blown they will flash fast or light up on the dash and not flash letting you know there is a problem on that side