Question about 2000 Ford F250 Super Duty Crew Cabs

1 Answer

F250 diesel running rough

I recently replaced my 2000 7.3 with a 2002 7.3 I have a code that advising insuffient fuel to # 8 cylinder the truck also runs rough

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

The only way to find out is to take it to a mechanic who has an engine analyzer and the rubbing could be caused by a loose mudshield (or a dozen other things).

Posted on Jun 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 97 ford f-250 is running very rough


I would chweck igniton first...miles? and previous service?

Sep 15, 2014 | 1997 Ford F250 SuperCab

2 Answers

So I have a ford 97 e350 ambulance. I finally got the engine codes they read p0308 and p1662. Showed up at the same time. The truck ran rough, turned engine 9ff, back on, idled fine, and then a few mi utes...


cylinder 8 is missing combustion which caused the o2 code the black box will not cause a specific cylinder to miss, there fore a fuel distribution problem is evident, the injector on eight is proablly the culprit the #8 cylinder is the last cylinder to be fed a fuel, pressure test is needed to determine if the fuel pump is strong enough to deliver diesel, ambulance spend a lot of time idling causing fatigued fuel pumps

Nov 08, 2013 | Cars & Trucks

2 Answers

2000 ford f250 diesel in watter


Bad intake manifold gasket, head gasket, manifold pre-heat gasket, or any combination of them.

Feb 22, 2010 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

7.3 rough idle


Gas or diesel having same problem, I'd start there to confirm fuel pressure . It may be pump running partially when cool, but when it heats up (the pump) it may be cutting out pressure wise. Not uncommon for a fuel pump to pump good when cold, then die once pump heats up from running. Still makes noise, but isn't supplying any or enough pressure.

Dec 23, 2009 | 1996 Ford F250 Crew Cab

1 Answer

I have a Ford F250 Extended cab that started running rough and losing power this morning got Codes P0301 P0303 P1151 and P0171 What should i Do?


P0301 = Misfire cylinder #1P0303 = Misfire cylinder #2
P0171 = System too lean cylinder #1
Are you sure on the P1151 code? I am thinking this may be a P0151 which is O2 sensor related.
This looks like you have a fuel system related misfire. I would do a fuel injection cleaning service and then clear codes and see if the codes regenerate.

Jun 05, 2009 | 1997 Ford F250 SuperCab

2 Answers

95 F-250 smokes when cold


CK FUEL FILTER, AS WELL AS AIR FILTER , THEN HAVE SOMEONE TO CHECK GLOW PLUGS AND GLOW PLUG RELAY

Jan 31, 2009 | 1995 Ford F250

1 Answer

2008 F250 Diesel


It sounds like a problem with your computer or injection system. the computer controls the amount of fuel put in the cylinders when you step on the gas. But it sounds like your truck's computer is having problems controlling this and when you accelerate hard or are towing and step on the gas, the computer just pumps diesel into the cylinders which causes the rough running(i assume misfiring and what not) and the loss of power. But when your not towing or accelerating hard, you are better controlling the amount of fuel going into the cylinders so there arent any problems. Go back to the dealer and tell them there is a problem with the injection system and it adds too much fuel when you try to get a lot of power out of it.

Oct 20, 2008 | 2008 Ford F 250 Super Duty 4WD

3 Answers

2000 F-250 7.3 diesel, cuts out runs rough no power


Well, you have to let diesels warm up before you drive them so the engine gets warm and it may not sound right at first because if its not warm the compression gets off and doesnt fire right. If you try to give it too much gas before its warm, extra diesel will get in the cylinders and misfire. Then when it does fire, there is a lot of extra fuel in it so that causes the smoke and smell. You should always let it warm up for a bit before driving when you havent driven it for a while.

Oct 20, 2008 | 2002 Ford F250 Super Duty SuperCab

Not finding what you are looking for?
2000 Ford F250 Super Duty Crew Cabs Logo

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...