Question about 2001 Chevrolet Blazer

1 Answer

Transmission all forward gears work,but no reverse

Posted by on

  • 2 more comments 
  • mlc3 Dec 13, 2008

    I have the same problem- but in a 1998 blazer- will go in other gears but reverse doesn't work. (automatic trans).

  • czyk Dec 19, 2008

    Just happened to me today. Any solutions?

  • czyk Dec 19, 2008

    Mine just went today. All forward gears work but no recverse. Just revs.

  • Anonymous Mar 16, 2009

    I have a 1998 ford galaxy which has developed this problem. If you select reverse it still moved forward. It also started to be slower in forward gears.


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 58 Answers

Hello first , actualy that problem may have for many reasens but the most commen problem is being from the clutch , check on it , and contact us againe , thank you for using fixya.

Posted on Jun 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have lost forward gears on Jeep Grand 2.7CDR taking only in reverse


the transmission computer computer has gone into fail safe mode

an electronic failure not a mechanical failure
could be something simple as a computer re-set or
a transmission solenoid s

will need a jeep service center
or automatic transmission work shop to fix it



26314380-xmqclvgem1na1ssuwwrabsdr-1-0.jpg

Oct 17, 2016 | Jeep Cars & Trucks

1 Answer

Ford crown victoria 99 won't go forward goes in reverse


You have a 4r70w transmission and more than likely a forward drum failure has occurred, seeing as reverse still works fine and no forward engagement. This is not an electrical problem, it is a hard part failure and the transmission will need to be disassembled to repair it. Forward drum failures are one of the more common failures in these transmissions. 4r70w no forward gears only reverse help needed Ford Truck Enthusiasts...

Dec 01, 2015 | 1999 Ford Crown Victoria

1 Answer

V70 poured new Dex3 auto trans in. Reverse gear stops working after a few days equal 500km, but all forward are still ok.


Sounds like your transmission is going bad. If your transmission is slipping only in drive or forward gears, then it could be just that it is low on fluid, but when reverse starts to slip it usually means rebuild/replace transmission.

Good luck

Dec 02, 2013 | Cars & Trucks

1 Answer

95 mustang v6 auto no forward gears but works in reverse had ****** rebuilt and same thing


Maybe your differential is shot and will only allow reverse spin or the transmission was not really rebuilt professionally. Was the transmission checked outside of your car after rebuild? Does your vehicle have a Powertrain Control Module (PCM)? Maybe the module went bad or faulty.

Jun 18, 2012 | Cars & Trucks

1 Answer

Transmission goes forward in reverse,neutral,actuall in all gears except park tranmission control solenoid has been changed


You have a serious mechanical failure in the transmission, it will need to be rebuilt or replaced.

Jun 01, 2012 | Cars & Trucks

2 Answers

I have a 1998 Oldsmobile Bravada auto trans drive works fine but no reverse


Are you sure you have all 4 forward gears? Most of the time a no reverse condition also means 1st and 3rd only.No 2nd or 4th.If you dont have all the forward gears as i suspect , the reaction shell is stripped or broken.If you do have all the forward gears then these are the two most common reasons you do not have reverse.1 reverse input clutches are damaged or burnt 2 forward cltches have slipped to the point they are welded together causing a mechanical bind in reverse and also causing the transmission to pull forward in neutral.Let me know if i can help.Good Luck.

Feb 28, 2011 | 1999 Oldsmobile Bravada

1 Answer

Was pushing snow and heard aloud ping while in reverse and it quit pulling.all forward gears still work. sounded like a u-joint. believe me i no that sound.i drive it like i stoled it. lol.but thats what...


not sure if this is an automatic or manual transmission 1st (automatic)if all forward gears are still working what it sounds like is that the reverse drum in the transmission has come apart. which will eventually cause the forward gears to start to go if thats the case, the rapir for the reverse drum is internal the transmission will need to be rebuilt. you can just put a reverse drum, but my opinion is there will be more damage and while its out might as well rebuild the entire transmission. you didnt mention if it was 4 wd or not and only rarely have i seen a transfer case cause the same issue, once most recently in a f150 with a manual transmission i was working on the chain stretched so bad it lost reverse but had all forward gears. 2nd (manual) could have lost the reverse synchronizer whic again the trans will need to be repaired either with just a syncro or complete rebuild. hope this helps

Feb 04, 2011 | 1999 Chevrolet 3500

1 Answer

The reverse gears are not working.if you put the reverse gears it will accelerate infront instead.what do i do?


It sounds like the reverse band broke. Typically with automatic transmission when you put the transmission in reverse a couple things happen. Usually, the forward clutch engages and the reverse band engages holding the reverse drum from turning, which causes the planetery gears to make the vehicle move backwards. If the band breaks there is nothing told hold that drum from turning and you have a forward gear. The bad news is the trany is going to have to come out to be repaired and usually the reverse drum is one of the first things to go into the trany, so it has to be completely disassembled. Take it to a transmission shop have them check it, hopefully it's something simpler.

Jan 24, 2010 | 2003 Toyota RAV4

1 Answer

Manual transmission won't shift into reverse


Your reverse gear is worn down, unfortunately, you will have to get your reverse gear replaced, if the forward gears are working properly. if not, a new transmission (or rebuilt) will be necessary.

Jul 18, 2009 | 1989 Ford F 150

1 Answer

1999 F250 only goes in reverse, no forward gears.


I believe that reverse is operated by a brake band. So it seems to be stuck. It is operated by a piston, and the seal could have swelled and caused too much friction. But you could loosen up the adjustor so that it is disengaged, in order to get forward gears again. Perhaps you can force the piston to retract as well, once you drop the pan again.

Jun 26, 2009 | Ford F-250 Cars & Trucks

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...