Question about 2007 Infiniti Q45

2 Answers

I have a samsung q45 laptop with a problem,when yoiu press the fn key you can control the volume and brightness by pressing the up down left right keys in the right hand corner of the laptop,this was working fine but has now stopped is there a setting which swithes this function on and off

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

HI guys! I have a laptop Q45 and set up wins 7 on it. Nonetheless, I have some problems about adjusting the contrast which is related to the button fn. I had set up the program named ( Easy display manager) however it didn't work. Could you help me to sold this problems.

Posted on Feb 09, 2010

Install Easy Display Manager http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=HQ&CttFileID=1547991&CDCttType=SW&ModelType=N&ModelName=NP-Q45&VPath=SW/200707/20070705142636328_Easy_Display_Manager2.1.4.3.zip

Posted on Jul 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I NEED A KEY CODE FOR THE BUILT IN RADIO IN A FORD FIGO 1.4 AMBIENTE 2012 MODEL


Try this, found it on another answer board.

Press and hold the Auto button. While holding the Auto button, push and hold the Track Up button. The “_ _ _ _” will disappear after about 5 sec. Enter KCAR using the remote control from a higher end CD Receiver or any Excelon CD Receiver. Enter "KCAR” with the remote controller as described below. “K”: Press TRACK UP key (>>|) after pressing 5 key twice. “C”: Press TRACK UP key (>>|) after pressing 2 key once. “A”: Press TRACK UP key (>>|) after pressing 2 key three times. “R”: Press TRACK UP key (>>|) after pressing 7 key twice. * If you commit a mistake in the code entry, the unit enters the code request mode again. Press the Track Advance button on the remote to enter the override code. The unit will enter the All Off or Standby mode if done properly. Video Unlock: Use a remote from a higher end CD Receiver or any Excelon CD Receiver. Some Video remotes will work, switch on remote must be set to AUD. Press 55222277 on the remote. There will be NO visual verification when entering the override code. Head units with a Up / Down Volume control buttons: Press and hold the Volume Up button. While holding the Volume Up button, push and hold the Disp button. The “_ _ _ _” will disappear after about 5 sec. Enter KCAR using the remote control from a higher end CD Receiver or any Excelon CD Receiver. Enter "KCAR” with the remote controller as described below. “K”: Press TRACK UP key (>>|) after pressing 5 key twice. “C”: Press TRACK UP key (>>|) after pressing 2 key once. “A”: Press TRACK UP key (>>|) after pressing 2 key three times. “R”: Press TRACK UP key (>>|) after pressing 7 key twice. * If you commit a mistake in the code entry, the unit enters the code request mode again. Press the Track Advance button on the remote to enter the override code. The unit will enter the All Off or Standby mode if done properly.

Read more: How can I get the key code for ford figo radio systems? - Radio system key code ford figo :: Ask Me Fast at http://www.askmefast.com/How_can_I_get_the_key_code_for_ford_figo_radio_systems-qna4609185.html#q2909005

Dec 09, 2015 | Ford Cars & Trucks

1 Answer

How do I rest the Service indicator for a 2005 CLK Cabriolet? None of the suggestions listed below worked for me.


First make sure all of the doors, hood, trunk, etc are closed.
Turn the key to position 1
Press system select button(lower left buttons on the steering wheel) that looks like sheets of paper until you see mileage reading or temperature displayed.

Press the brightness button on the lower left instrument cluster 3 times. You should hear a signal and see voltage on the display.

Turn the key to position 2

Press the lower scroll forward/back button(steering left arrows)). You should see "service indicator" on the screen

Press the Brightness button again once. You should see oil type on the screen.

Select the oil grade you used by pressing the + & - buttons on the upper right on the steering wheel.

Press the scroll forward/backward button to confirm. Confirm oil reset, press R(brightness button on lower left on cluster) for 3 seconds should appear on the display.

Service confirmed should appear on the display.

Press the upper forward/backward button & "service indicator" appears on the display.

Press the upper system select button(lower left steering wheel button on left) The display should go back to basic mileage or temperature.

If all else fails. I believe the shortcut I took as a tech was, turn the key to the first position, scroll until you see the temperature or mileage displayed. Turn the key off, push in the brightness button and HOLD it while turning the key to the 2nd position. You should see something like do you want to reset service? press R(brightness) button for 3 seconds and it should reset.

Good luck. The newer cars are worse.

Oct 10, 2013 | Mercedes-Benz CLK Cars & Trucks

1 Answer

I cannot find the ARI-Z button to my car delta car radio. the instruction is press the am button simultaneuosly with the ARI-Button. where is the ARI-Z button in the delta radio? tnxs


Audi Delta CC Radio

tdisline_914.jpg
Please perform the following procedures while the car is parked. Otherwise you risk getting into an accident while your attention is not focused on the driving. Entering anti-theft code The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
  1. Turn on radio. The radio display shows "SAFE".
  2. Press the FM1/2 and DX buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
  3. Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
  4. Once the code shown on the display is correct, press the FM1/2 and DX buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
  5. The radio should unlock and be usable shortly afterwards.
  6. If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
  7. If you lose your radio code, contact your Audi dealer.

Other Preferences & Configurable Options The following is the procedure on how to access some other preferences that you may set in the Audi Delta CC radio.
  • GALA and Turn-on Volume Settings

    1. Turn off radio.
    2. While pressing and holding the TP button, turn on radio. "GALA" will be shown in the display.
    3. To select the speed at which GALA activates, press the tuning up (up-arrow) or tuning down (down-arrow) buttons to the left of the volume control knob. The display shows the following:

      __' Highway speed
      _'_ City speed
      '__ Slow speed

    4. To save the setting, press both the tuning up and tuning down buttons simultaneously. "GALA" disappears.
    5. Press the TP button briefly, "VOL" appears in the display.
    6. To increase or decrease the turn-on volume, press the tuning up or tuning down buttons.
    7. To save the setting, press both the tuning up and tuning down buttons simultaneously. "VOL" disappears.

    To activate GALA, push the Treble control knob to let it spring out. Then, pull it out one more detent, and then turn the knob to the right. To deactivate GALA, do the same except turn the knob to the left. Push the knob back in when you're done.

Oct 05, 2011 | 2001 Audi A4

1 Answer

Can't set clock for dst


If you have the command display unit first adjust time on command it will automatically take by instrument cluster if don't have the command, First ignition on, then have a look on steering wheel you have two multifunction switch group on your steering at left and right, press right arrow key on left switch group, keep eye on instrument cluster display then get setting menu and press OK key on same switch group, then use up and down arrow keys to select time then press OK, and now you have to operate right hand switch group + or - key for increase or decrees time.adjust the time or date you need then press OK, is this information helped you?

Nov 14, 2010 | 2007 Mercedes-Benz ML350

1 Answer

I need to change the clock on my E500 mercedes?


First ignition on, then have a look on steering wheel you have two multifunction switch group on your steering at left and right, press right arrow key on left switch group, keep eye on instrument cluster display then get setting menu and press OK key on same switch group, then use up and down arrow keys to select time then press OK, and now you have to operate right hand switch group + or - key for increase or decrees time.adjust the time or date you need then press OK, is this information helped you?

Oct 18, 2010 | Mercedes-Benz 500-Class Cars & Trucks

1 Answer

Changed car batery, now i need to reset the clock.


press the set button and use the seek and scan buttons to change time

Press the volume control knob and hold down. Press the seek button left to set hour, press right to set minutes.

Hold the clock button, and use seek left and right. Left <- (Hours) & Right -> (Minutes)

Depending on what radio you have ONE of these will work.

Jan 15, 2010 | 1991 Ford Escort

2 Answers

Manual stolen when car was vandalized, need to know how to set clock and radio stations in 1994 Ford Tempo please


setting stations on Fords are easy,put it on the station you want to program and push the channel button in and hold for about 2 seconds then it should flash,now the channel is set..now for the clock,with the key on and radio turned off,press the clock button,then press the seek or scan forward or reverse to adjust the time,then hit the clock button again to make sure it sets.

Oct 22, 2009 | 1994 Ford Tempo

1 Answer

2008 eos radio with no directions


I am a EOS owner with a multifunction steering wheel.
I hope the following is helpful to you.
you have 4 buttons on the left and four on the right of your steering wheel.

left side
top and bottom left, volume up and down
top right (star) is the radio mute.
bottom right on the left side is the telephone button.

right side
top left on right side is the computer changer it has lines on it.
this changes the screen to setting, radio, telephone etc.
botton left is (ok) enter button
top right is the menu select up
bottom right is the menu select down to move up and down the menues
view outputs on the small screen between the rev counter and speed gauge.

Setting up phone
for phone use you will need a cradle for your phone which fits into the phone holder on your dash. it must be the exact one for the phone you have eg nokia E51if your phone has bluetooth, plug in your phone into the cradle and lock it in. set your phone to have bluetooth on, and start search for new bluetooth device. then with the car ignition on, press the left of the two buttons on the phone cradle and within 5 seconds the right one, what should happen now is the phone should show it has found a new device. select the device on your phone and when asked put in the code 0000 zero zero zero zero. press OK on your phone, this will allow your phone to be connected to the car via bluetooth connection.

using your phone, you can make calls, and hear the other end through your car loudspeakers, your microphone is integrated into the light panel by the rearview mirror. when have a call this it will mute the radio and you can control the volume of the call with the volume control on the steering wheel and end or answer calls with the phone button on your steering wheel. for phones without bluetooth the connection is made when the phone is placed in the cradle.

for other function press the top left button on the right side, this will scroll the different options, convienence options can only be changed when the car is stationary. audio is for the radio, using the far right buttons you can change channels with this and select with the OK button.

for a new manual ask at a breakers yard if they have a eos in maybe they have the user manual with it. or ask a car rental if they offer EOS and ask if you could photocopy the part of the manual you do not have.
i would send you mine but it is in German.

Mar 20, 2009 | 2007 Volkswagen EOS Convertible

2 Answers

Radio volumn goes down when braking


if there is a menu button or something like it look for avc auto volume control set to 0

Nov 13, 2008 | 2006 Ford Focus

1 Answer

Radio controls work incorrectly


have you try having the steering wheel controls replaced? if so the problem is in the radio

Sep 17, 2008 | 2006 Honda Accord

Not finding what you are looking for?
2007 Infiniti Q45 Logo

Related Topics:

838 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...