Question about 2000 Hyundai Sonata

2 Answers

Hyundia Trajet code 1723

When you cahge the gear from 2 to D no diffrence in the speed you can drive by gear 2 even if you have high speed you dont find any diffrence.

Plz your support is highly appricated.

Posted by on

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Where is the main control relay of the transmission located on a 2000 hyundai sonata ??

Posted on Sep 30, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

P1723 A/t control relay - Stuck on.
This Code is showing that the main control relay of the transmission is stuck on. When that happens transmission goes in to the fail safe mode which is being stuck in 3rd gear to prevent damage to the transmission

Posted on Jun 26, 2008

  • robertson670
    robertson670 Feb 06, 2013

    what is the recommendation in correcting this problem.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Squeeking noise coming from power assisted steering trajet hyundia 2005


is the noise from engine area if so the pas drive belt may need retensioning or replacing

Feb 20, 2017 | Cars & Trucks

1 Answer

3 speed box in drive 1st and 2nd gear takes 3rd gear dont


How to adjust 3 speed column shifter - YouTube

? 9:53
https://www.youtube.com/watch?v=2TCHzIvAvRQ
Mar 6, 2014 - Uploaded by luke Fugate
This is a video to show you how to adjust a Three speed on the column to ... It's great not having to wind the engine and transmission just to take off in 2nd or 3rd gear. ... It was ALWAYS getting stuck between 1st and 2nd gear. .... 1977 c10 3 On The Tree ' How to Drive a 3 Speed Column Shift - Duration: ...

Diagnose Automatic Transmission

www.aa1car.com/library/2002/bf90222.htm
All they know is that they put their gear selector in "D" for Drive and their vehicle ... But when internal problems cause the transmission to act up, it takes a fair amount .... In Chrysler three-speed automatics, changing the fluid to ATF+3 can also help ...kickdowns to get the transmission to downshift to 1st from 2nd or 3rd gear.

Manual transmission - Wikipedia, the free encyclopedia

https://en.wikipedia.org/wiki/Manual_transmission

Wikipedia1 Overview; 2 Unsynchronized transmission; 3 Synchronized transmission; 4 Internals.... gear speeds by blipping the throttle when shifting from 2nd into 1st. ... In a synchromesh gearbox, to correctly match the speed of the gear to that of the ... Even in transmissions that do not feature direct drive, it's an advantage for the ...

When do you use the 1,2,3 gears on an automatic car ...

https://www.reddit.com/.../when_do_you_use_the_123_gears_on_..

Jan 10, 2016 | Cars & Trucks

1 Answer

Singelton nsw where is location hyundia trajet 2001 model


images for fuel pump location hyundai trajet 2001 model

How to Replace a Fuel Pump : Removing Fuel Pump From ...

? 1:18
https://www.youtube.com/watch?v=aRSpe-BByBg
Oct 1, 2008 - Uploaded by expertvillage
Lift out gas tank very slowly. Learn more steps for replacing thefuel pump in the gas tank of your Lincoln ...

Dec 28, 2015 | Cars & Trucks

1 Answer

I have a Hyundai trajet 2001 today was driving 110 on freeway and when I took my foot off the accelerator to show down then put it back onto the accelerator it backfired. I'm thinking a vacuum seal may be...


maybe just a bit of un burnt fuel, if it has done it only once , common at high speed to leave unburnt fuel in cylinder when taking pressure of the accelerator

Oct 05, 2014 | 2001 Hyundai Trajet

1 Answer

Why does my 4 wheel drive not work all the time?


Elaine,

not work, do tell what makes you think it dont work (a lamp) or tires slipping or dead tires. (by tires mean that and traction)??????????

what mode fails, of the many, and where.???????



first off, we dont know what your tires are touching.

on road, or off road. pavement or ICE or snow.

that matters big time . (you read manual and match MODE to Road)

your lost operators guide explains all that, right?

eg: how and when to use, 4wd, its all there. I promise.

ControlTrac 4-wheel-drive system



here are the mode. which one , gives you problems.



quote ford with comments.



What are the modes, and how do they differ?

(note this is the operational behavior of a 2008 Ford Expedition. Newer and older Expeditions will vary only slightly)



2H 2-wheel-drive with high range gearing (1.00:1) Rear-wheel-drive capability,

2-wheel electronic traction control system is enabled



4A 4-wheel-drive Auto with high range gearing (1.00:1) Full-time all-wheel-drive capability, ((best on pavement or any time)

Electronically adjusted torque split to front & rear wheels, Electronically variable center differential,

Front driveshaft & rear primary driveshaft allowed rotational speed difference,

4-wheel electronic traction control system is enabled



4H 4-wheel-drive with high range gearing (1.00:1) Part-time 4-wheel-drive capability, (not for dry pavement EVER)

Continuous 50/50 torque split to front & rear wheels, Electronically locked center differential,

Front driveshaft & rear primary driveshaft mechanically locked with no rotational speed difference,

4-wheel electronic traction control system is enabled



4L 4-wheel-drive with low range gearing (2.64:1) Part-time 4-wheel-drive capability, (off road usage, mostly)

Continuous 50/50 torque split to front & rear wheels, Electronically locked center differential,

Front driveshaft & rear primary driveshaft mechanically locked with no rotational speed difference,

4-wheel electronic traction control system is enabled, ESC and RSC are disabled



In 4A mode the center differential is electronically-controlled and rear drive wheel bias. The on-board computer monitors for any sign of rear drive wheel slip (loss of traction)

If loss of traction is detected, the center differential is told to send a share of the engine\'s torque to the front drive wheels. It will not let the front driveshaft turn at the same speed as the rear driveshaft.



What about traction management?

1997-2002 model Ford Expeditions offered an optional limited-slip rear differential (LSD). A conventional open rear differential was standard along with the conventional open front differential and the electronic locking center differential.

comment with out LSD, one tire can spin, on say ice.

but the other 3 tires dont, in full time.

Jul 04, 2014 | 2003 Ford Expedition

1 Answer

2007 Kia Sportage clutch slips in high gear


If engine revs increase but road speed does not increase, your clutch is coming to the end of its life and needs to be replaced

Jun 06, 2014 | 2007 Kia Sportage 2.0

2 Answers

Speed sensor


Speedometer sensor measures axle(driveshaft) speed for your speedometer gauge.
Input speed sensor measures the speed of the input shaft of the transmission.
The output speed sensor measures the output shaft, the ECM compares these two signals to determine the amount of clutch slippage and adjusts parameters accordingly for optimal operation.

Feb 02, 2014 | 2002 Kia Sedona

1 Answer

Renault megane engine noise at high rev


No driving will only further damage the parts that are bad and could damage other parts making it even more costly. and it sounds like tranmission problem.

Jan 28, 2014 | Cars & Trucks

1 Answer

I need help asap 2003 Expedition code p0171 and code p0712 i have and idea of the 1st code but whats the secound code i really need help i dont want to take it to a shop where there going to charge me alot...


P0700 Transmission Control System

P0701 Transmission Control System Range/Performance

P0702 Transmission Control System -Electrical

P0703 Torque Converter/Brake Switch B Circuit

P0704 Clutch Pedal Position Switch -Circuit Malfunction

P0705 Transmission Range Sensor/Switch Circuit Malfunction (PRNDL Input)

P0706 Transmission Range Sensor/Switch Circuit Range/Performance

P0707 Transmission Range Sensor/Switch Circuit Low Input

P0708 Transmission Range Sensor/Switch Circuit High Input

P0709 Transmission Range Sensor/Switch Circuit intermittent

P0710 Transmission Fluid Temperature Sensor Circuit

P0711 Transmission Fluid Temperature Sensor Circuit Range/Performance

P0712 Transmission Fluid Temperature Sensor Circuit Low Input

P0713 Transmission Fluid Temperature Sensor Circuit High Input

P0714 Transmission Fluid Temperature Sensor Circuit Intermittent

P0715 Input/Turbine Speed Sensor Circuit

P0716 input/Turbine Speed Sensor Circuit Range/Performance

P0717 Input/Turbine Speed Sensor Circuit No Signal

P0718 Input/Turbine Speed Sensor Circuit Intermittent

P0719 Torque Converter/Brake Switch B Circuit Low

P0720 Output Shaft Speed Sensor Circuit

P0721 Output Shaft Speed Sensor Circuit Range/Performance

P0722 Output Shaft Speed Sensor Circuit No Signal

P0723 Output Shaft Speed Sensor Circuit Intermittent

P0724 Torque Converter/Brake Switch B Circuit High

P0725 Engine RPM Input Circuit

P0726 Engine RPM Input Circuit Range/Performance

P0727 Engine RPM Input Circuit No Signal

P0728 Engine RPM Input Circuit Intermittent

P0729 Gear 6 Incorrect Ratio

P0730 Incorrect Gear Ratio

P0731 Gear 1 Incorrect Ratio

P0732 Gear 2 Incorrect Ratio

P0733 Gear 3 Incorrect Ratio

P0734 Gear 4 Incorrect Ratio

P0735 Gear 5 Incorrect Ratio

P0736 Reverse Incorrect Ratio

P0737 TCM Engine Speed Output Circuit

P0738 TCM Engine Speed Output Circuit Low

P0739 TCM Engine Speed Output Circuit High

P0740 Torque Converter Clutch Solenoid Circuit

P0741 Torque Converter Clutch Solenoid Circuit Performance or Stuck Off

P0742 Torque Converter Clutch Solenoid Circuit Stuck On
P0743 Torque Converter Clutch Solenoid Circuit Electrical
Now i dont know a lot about automatics especially modern ones with all this fancy electronics thats used nowdays but i think its a fault with the temperature sensor for the gearbox.But where its located and what it looks like i have no idea it could even be mounted inside the gearbox .Sorry not a very good answer from a mechanic but?? very few of our europeon cars come with auto transmission .Evan when i do know whats wrong i cannot buy the parts for the gearbox as only re-con boxes supplied by the dealer so best advice is to try a specialist in auto box repairs only .PS some of my best students when i used to teach mechanics many moons ago were the girls so no excuses like iam only a girl please

Apr 22, 2013 | Cars & Trucks

Not finding what you are looking for?
2000 Hyundai Sonata Logo

Related Topics:

891 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

71694 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7031 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...