- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
mine did the same thing and it was oxygen sensor since engine light came on there should be an error code on computer.Get a diagnostic checker or take to a garage and have them hook uo to the diag connector. I bought a diagnostic checker few years ago and it has come in very handy sure hope this helps!!
Sounds like you have air trapped in the heater core when you flushed the heater core. loosen the upper most heater core hose and run the engine untill coolant seeps out. Wait until the coolant has reached running temperature.
if the fan does'nt come on at any speed have the fan checked if fan is good check the switch if on good replace fan switch located inside there is also a regulator under dash behind the glove box if the fuse's,motor & switch are all good this regulator the last comp. in the heater circut or you have a broken wire. hope this is helpful