Question about 2003 Nissan 350Z

3 Answers

2003 350Z window problem

My driver side window suddenly stopped working. It is currently rolled down and will not roll up

Posted by on

  • 3 more comments 
  • Anonymous Jul 02, 2008

    window will not roll down

  • cocodrilo145 Jul 11, 2008

    i haved the same problem with my 2003,driver window

  • rnguy119 Jan 29, 2009

    My drivers side window would work off and on. Now it doesn,t work at all.

  • ryanthomas11
    ryanthomas11 Apr 18, 2012

    hi mate! did you get this fixed?? ive had the same issue for months now and its driving me insane!!!

    ryan

  • Anonymous Mar 26, 2014

    When I roll up the driver's window, the sunroof will "Pop up". Why. It just suddenly started doing this.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Most likely your window motor has failed due to dirt inside from normal wear and tear during use, or overloading has burned it out. A second possibility is that you need to reset the calibration on the motor that tells it when to stop at the top and bottom (also necessary after replacing a worn or burned out motor). Great service-manual-quality info can be found here (link is to the reset procedure). Door panel removal is here. Window motor service info is here and here.

Posted on May 04, 2009

I have the same problem, It belive is the window regulator motor, I open the door panel and kick the motor couple time, then press the switch if works. My window work after that, but the problem came back. I need a window motor . But its a temp solution if you have some mechanical skills.

Posted on Jul 11, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had this same problem with my 03 Z. To fix remove door facing, and crash plate. You can find a diy on how to remove the lift motor. Once you have removed the lift motor from the car, there are 3 screws that hold the casing together. Carefully remove the metal shield. DO NOT touch any of the parts with bare hands. There will be a shaft inside the shield that will have a cylindrical copper contact plate. This plate is probably black from the carbon brushes in side the shield. Again very carefully with the finest grit sand paper you can find softly sand the copper back to its original color. Put the motor back together and reinstall it in your car. A word to the wise. Make sure your window is down when you do this and mark the cable harness and the motor so you can realign the motor and the cable crank, other wise your window will not realign properly and it will roll back down when the automatic button is hit. This process is tedious but I promise it work. Or well it worked on mine.

Posted on Jul 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi the passenger side window rolled down one day and wouldnt roll back up so we did some checking and discovered the motor was good so we figured,and was told it probably was the master switch on the...


Need to get a wiring diagram. Buy a book and follow the wiring schematic. It should help you out majorly. Can't really work on electrical issues without one.

Mar 17, 2013 | 2000 Oldsmobile Silhouette

1 Answer

MY 2006 DOdge ram Thunder Road's windows dont work. They used to work i bought the truck new. All of a sudden all the windows from every control dont roll down their own windows as well as the driver side...


your truck also has power relays working with the fuses. each door has its on circuit except the main controller in drivers side door. if u cannot control anything from drivers side then look at the relays for possible cause to your problem.

Apr 22, 2010 | 2006 Dodge Ram

1 Answer

Passenger window rolls down window but does not roll up


replace the switch. They have parts made of plastic pressing on the contacts softing these babies up making them useless in a few years

Jan 20, 2010 | 2005 Ford Explorer

1 Answer

Drivers side window sticks have way up


Something inside is broken, obviously. If you can identify it from the picture you should be able to order that part (bring the diagram)
Diagram is power and manual.
9a3a68d.jpg

Sep 19, 2009 | 2000 Chevrolet Cavalier

1 Answer

1999 Chevy Suburban Power Windows won't roll all the way down


sounds like the alignment on the windows is bad just my thoughts

Jul 30, 2009 | Chevrolet Suburban Cars & Trucks

2 Answers

My drivers side window will go down but not up


it is probably the motor in the window

May 14, 2009 | 1997 Honda Accord

Not finding what you are looking for?
2003 Nissan 350Z Logo

4,216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...