Question about 1995 Eagle Talon
Hi I have a 1995 Eagle Talon ESI non turbo. The car was running one day and the next it wouldn't start. I was able to get a trouble code of 12 ( Air Flow Sensor) and 55 (Idle Air Control Valve?Servo Valve Postion Seensor (IAC)) I recently had it in the deals for the Engine Light beeing on. They replaced the Ignition Coil, Plugs and wires. This time the engine light doesn't even come on, Turns over but will not start...
Check the mass air flow sensor, if this is bad then the ecu wont get a signal and it wont send the right amount of fuel to the cylinders causing a no start condition
Posted on Mar 19, 2010
Check the wires going to the cam and coil and crank sensors i replace all and found out when i pulled the wiring harness apart that i had a broke wire going to the crank sensor the orange wire on the crank should have 5 volts to it when the key is in the on position if not it is either the cam sensor or the ecu
Posted on Oct 21, 2012
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
did you get the codes by doing the "key dance"(on,off,on,off,on) ?
if so, it almost always flashes a 12 and 55. here is what they mean.
12 - direct power input to the PCM has been disconnected within the last 50 key-on cycles
55 - End of error messages
Posted on Dec 14, 2008
Tips for a great answer:
Apr 23, 2012 | 1996 Eagle Talon
Dec 30, 2011 | 1995 Eagle Talon
Oct 05, 2010 | 1995 Eagle Talon
Jul 28, 2009 | 1993 Eagle Talon
Dec 13, 2008 | 1995 Eagle Talon
Jun 12, 2008 | 1995 Eagle Talon
1,705 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: