Question about 1994 Honda Accord

1 Answer

Fire when i rotate the engine i get no fire to the distributor

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 702 Answers

Check the connections to the coil. You may have a broken wire or a bad coil all together.

Posted on Jun 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram spark plug wiring


my guess, is you removed them and didnt mark them?
the firing order?
what engine, there are 5.

to do this , one need to know 5 things.
2.5L, 2.8L, 4.0L and 5.2/5.9L engine displacements.
the distributor rotation direction CCW, or CW
and last the firing order, sometimes marked clearly on the intake manifold.
you must now where #1 cylinder is (always most front)
1989-98 2.5L Engine firing order: 1-3-4-2 Distributor rotation: Clockwise
2.8L Engine firing order: 1-2-3-4-5-6 Distributor rotation: Clockwise
4.0L Engine firing order: 1-5-3-6-2-4 Distributor rotation: Clockwise
5.2L and 5.9L Engine firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise
on a v6/v8 one cylinder is more forward. this is #1, look carefully.

Nov 26, 2013 | 1997 Jeep Grand Cherokee

2 Answers

1993 lexus 300 sc firing order and distributor cap diagram


Hello! If the engine in your vehicle is the 3VZ-FE...The firing order is 1-2-3-4-5-6...Distributor rotation is Counter Clockwise...

saailer_14.gif

If the engine is a 2JZ-GE...The firing order is 1-5-3-6-2-4...Distributor rotation is Counter clockwise

saailer_15.gif
Guru...........saailer

Nov 20, 2010 | 1992 Lexus Sc 300

2 Answers

Ignition oder mix up


FIRING ORDERS
NOTE: To avoid confusion, tag and remove the spark plug wires
one at a time, for replacement.

If a distributor is not keyed for installation with only one orientation, it
could have been removed previously and rewired. The resultant wiring would hold
the correct firing order, but could change the relative placement of the plug
towers in relation to the engine. For this reason it is imperative that you
label all wires before disconnecting any of them. Also, before removal, compare
the current wiring with the accompanying illustrations. If the current wiring
does not match, make notes in your book to reflect how your engine is wired.





Fig. 1: The firing order can usually be found cast onto the
intake manifold
91072p23.jpg






Fig. 2: 1984-88 2.5L engine Engine firing order: 1-3-4-2
Distributor rotation: Clockwise
86742ga3.gif






Fig. 3: 1989-98 2.5L engine Engine firing order: 1-3-4-2
Distributor rotation: Clockwise
86742ga2.gif






Fig. 4: 2.8L engine Engine firing order: 1-2-3-4-5-6
Distributor rotation: Clockwise
86742ga4.gif






Fig. 5: 4.0L engine Engine firing order: 1-5-3-6-2-4
Distributor rotation: Clockwise
86742ga1.gif






Fig. 6: 5.2L and 5.9L engines Engine firing order:
1-8-4-3-6-5-7-2 Distributor rotation: Clockwise
86742ga5.gif



prev.gif next.gif

Oct 31, 2010 | 1998 Jeep Cherokee

1 Answer

Just wondering if you have a breakdown diagram for a 1992 dodge colt 1.5l distributer


I do not have a breakdown diagram for a distributor, but just the firing orders and description of ignition system for the Dodge Colt and related models (based on Chilton manuals) if that's what you're looking for: FIRING ORDERS Fig. 1: 1990 1.8L SOHC Engines Firing order: 1-3-4-2 Rotation: clockwise 84182009.gif

Fig. 2: 1.6L DOHC Engine Firing order: 1-3-4-2 Distributorless Ignition 84182010.gif

Fig. 3: 2.0L Engine Firing order: 1-3-4-2 Rotation: clockwise 84182011.gif

Fig. 4: 1.5L Engine Firing order: 1-3-4-2 Rotation: counterclockwise 84182012.gif

Fig. 5: 1993 1.8L Engine Firing order: 1-3-4-2 Rotation: counterclockwise 84182013.gif

Fig. 6: 2.4L Engine Firing order: 1-3-4-2 Rotation: clockwise 84182014.gif

To avoid confusion, replace spark plug wires one at a time. --- Distributor REMOVAL & INSTALLATION Although the distributor can be removed from the engine no matter which cylinder is about to fire, it is a good idea to have number one cylinder at TDC before distributor removal. 1.5L, 1.8L, 2.4L SOHC Engines
  1. Disconnect the negative battery cable.
  2. Disconnect and tag the spark plug wires from the distributor cap.
  3. Disconnect the distributor harness connector.
    Fig. 1: Ignition system for the 2.0L engine 84183001.gif

    Fig. 2: Ignition system for the 1.5L engine 84183002.gif

    Fig. 3: Ignition system for the 1992-93 1.8L engine 84183003.gif

    Fig. 4: Ignition system for the 2.4L engine 84183004.gif

  4. Loosen the distributor retaining bolt and remove the distributor from the engine. To install:
  5. Rotate the engine until No. 1 cylinder is at TDC on its compression stroke. NOTE: Be careful not to turn it to the No. 4 cylinder TDC on its compression stroke by mistake.
  6. Align the distributor housing and gear mating marks.
    Fig. 5: Ignition system for the 1990 1.8L engine 84183005.gif

    Fig. 6: Distributor installation for the 1990 1.8L engine 84183006.gif

    Fig. 7: Distributor installation for the 1992-93 1.8L engine 84183007.gif

  7. Install the distributor into the engine, while aligning the fine cut (groove or projection) on the distributor flange with the center of the distributor mounting stud.
  8. Install and tighten the distributor retaining bolt.
  9. Reconnect the distributor harness connector.
    Fig. 8: Distributor installation for the 2.4L engine 84183008.gif

    Fig. 9: Distributor installation for the 1.5L engine 84183009.gif

    Fig. 10: Distributor installation for the 2.0L engine 84183010.gif

  10. Install the distributor cap and spark plug wires.
  11. Reconnect the negative battery cable.
prev.gif next.gif prev.gif next.gif

Oct 11, 2010 | 1992 Dodge Colt

1 Answer

Firing order 1987 s10 v4


FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 1.9L engine Firing order: 1–3–4–2 Distributor rotation: counterclockwise 88442g01.gif
Fig. 2: 2.0L engine Firing order: 1–3–4–2 Distributor rotation: clockwise 88442g02.gif
Fig. 3: 2.5L engine Firing order: 1–3–4–2 Distributor rotation: clockwise 88442g03.gif
Fig. 4: 2.8L engine Firing order: 1–2–3–4–5–6 Distributor rotation: clockwise 85382014.gif
Fig. 5: 4.3L engine Firing order: 1–6–5–4–3–2 Distributor rotation: clockwise 85382015.gif
prev.gif next.gif

Aug 31, 2010 | Chevrolet S 10 Cars & Trucks

2 Answers

What is the firing order for a grand cherokee laredo. I change the distributor for sgrand cherokee laredo jeep. I lined up tdc, had the rotor turned to number 1, but it is still missing.


You didn't post your engine size so please choose the apprpriate diagram:



148dbd9.gif

1989-98 2.5L Engine firing order: 1-3-4-2 Distributor rotation: Clockwise



cc5a81b.gif


2.8L Engine firing order: 1-2-3-4-5-6 Distributor rotation: Clockwise



427e129.gif

4.0L Engine firing order: 1-5-3-6-2-4 Distributor rotation: Clockwise



35fbd17.gif

5.2L and 5.9L Engine firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

May 12, 2010 | 1996 Jeep Grand Cherokee

1 Answer

Need firing order diagram for 91 s10 blazer


991 Chevy S10 firing order
The firing order for a Chevy s10 depends on which engine you have.
1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise.
2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise.
2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise.
2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise.
4.3L engine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.

Jan 09, 2010 | 1991 Chevrolet S-10

1 Answer

Need fire order,spark plug wires replaced in incorrect place


For several engines....

1aa520f.jpg

Fig. 1: Buick-built 231, 252 V6 Engine firing order: 1-6-5-4-3-2 Distributor rotation: Clockwise


863ec48.jpg

Fig. 2: Olds-built 260, 307, 350, 400, 403, 455 Pontiac-built 265, 301, 350, 400, 455 V8 Engine Firing Order: 1-8-4-3-6-5-7-2 Distributor rotation: Counter-clockwise


575110c.jpg

Fig. 3: Buick-built 350 V8 Firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise


d2d7f9f.jpg

Fig. 4: Chevrolet-built 267, 305, 350 Firing Order: 1-8-4-3-6-5-7-2 Distributor rotation: clockwise


fbcd2cb.jpg

Fig. 5: Chevrolet-built 262 Firing order: 1-6-5-4-3-2 Distributor rotation: clockwise


Hope helped with this (remember rated this help) Good luck.

Nov 05, 2009 | 1985 Oldsmobile Delta 88

1 Answer

Removed & replaced dist. cap and rotor on 1993 S10 Blazer 4.3 V-6


The firing order for a Chevy s10 depends on which engine you have. 1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise. 2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise. 4.3L engine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.

Jul 03, 2009 | 1993 Chevrolet S-10 Blazer

Not finding what you are looking for?
1994 Honda Accord Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...