Question about 1966 Ford Mustang

1 Answer

1969 Mustang Plug Order

Ok, what is the layout of the plugs down the motor if you are looking at it from the front, what order do you put the plug wires on down each side. ex: left side:1-2-3-4 Right Side:5-6-7-8.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

You are correct right=5678,left=1234,as you are facing motor.also,if you need to know firing order,it is stamped on intake manifold near distributor

Posted on Jul 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 93 ford mustang 4 cylinder 2.3 liter engine and need the wiring diagram for the spark plug wires. this is confusing because it is a 4 cylinder with 8 spark plugs and my brother didnt mark them...


The firing order and spark plug wiring layout is depicted in over-the-counter repair manuals like the Haynes for '87-93 Ford Mustangs. If you can't spend the ~$20 on one of those (available at Pep Boys, Autozone, eBay, Amazon, etc) you should be able to check one out from your local library.

Sep 17, 2011 | 1993 Ford Mustang

1 Answer

Im looking for a spark plug wirng diagram for a 1966 corette 427


1966 - 1969 with 4 Barrel Carb (L36)
(Low Compression Model)
Max Brake Horsepower - 390 @ 5200 rpm
Max Torque - 470 @ 3600 rpm
Stroke - 3.76
Bore - 4.251
Compression - 10.25
Firing Order - 18436572

1966 with 4 Barrel Carb (L72)
(High Compression Model)
Max Brake Horsepower - 425 @ 5600 rpm
Max Torque - 460 @ 4000 rpm
Stroke - 3.76
Bore - 4.251
Compression - 11.0
Firing Order - 18436572


zjlimited_1418.jpg

283, 327, 396, 409 and 427 CID Engine 1965-1966
Firing Order 1-8-4-3-6-5-7-2


zjlimited_1417.jpg

350 CID Engine 1969-1974 Corvette, 427 CID Engine 1969 Corvette
Firing Order 1-8-4-3-6-5-7-2


Hope this helps (remember to rate this answer)

Jun 15, 2011 | Chevrolet Corvette Cars & Trucks

2 Answers

3.1 firing order 95 camaro


according to GM they did not put a 3.1L in a 1995 camaro, they used a 3.4L now the 1994 used a 3.1L but it makes no difference they both have the same firing order 1 2 3 4 5 6 easy. but i think what you want is the location of the spark plug wires on the coil packs.

first off lets talk about cylinder placement passenger side from front to back 1 3 5 driver side from front to back 2 4 6

OK, now the coil pack from the end with 2 plug ins 1 4 6 3 2 5

good luck...thanks for using fixya

Feb 26, 2011 | Chevrolet Camaro Cars & Trucks

1 Answer

Have 67 Ford Mustang GTA 289V8. How do spark plug no. layout on engine left side is 1-3-5-7 and right side of engine is 2-4-6-8. Would that be correct and what is firing order?


The 67 289. Right (passenger) side, 1-2-3-4, left (drivers) side 5-6-7-8. Firing order, 1-5-4-2-6-3-7-8 cc. This should also be cast into the intake manifold in front of carb. Also, dist rotation is counter clockwise as your looking at motor from front, and #1 should be at approx 1 Oclock position. Most dist caps will have it marked.

Oct 20, 2010 | Ford Mustang Cars & Trucks

1 Answer

Back firing, seems like lack of fuel, need to know where both filters are


Back firing is caused by improper firing order or bad timing belt or chain.Verify spark plug wires are on in correct order. If no one has been changing wires, check that when harmonic balancer is lined up at top dead center that rotor in distributor is lined up to tower that goes to plug wire that goes to number one cylinder. First plug in front on passenger side. If it is off your chain or belt depending on motor needs to be changed.

Sep 24, 2010 | 1991 Ford Mustang

1 Answer

65 mustang, shaking when idling and bogging down when first trying to pick up speed. This is after mechanic put in new thermostat, spark plugs, and worked on the timing, saying the timing was off. It...


It sounds like he has the spark plug wires in the wrong firing order. Those are the "hoses" you see on the distributor cap. He changed the rotor $7 part. The timing won't make it shake. It can be off 10 degrees from specification an still run ok. Is it a 6 cylinder or V8?

I'm pretty sure he has 2 spark plug wires out of order. He needs to look up firing order of engine.
When he transferred wires from the distributor cap or put them back on after the plug change, he must have put 2 in different places.

Only other possibility is he cracked a spark plug installing them, it happens.

May 11, 2010 | 1965 Ford Mustang

3 Answers

Distributor cap and spark plug leads order/layout?


The firing order is 1342. The cylinders are numbered from left to right 1234. Depending on wether it is a 16 valve engine, the distributor cap lead number one position is at the front on the left, if its a normal 8 valve engine , the distributor cap lead number one is at the front pointing straight at the front. So, moving anti clockwise, the next lead will be number 3, then 4 , then 2.

Dec 07, 2009 | Volkswagen Golf Cars & Trucks

1 Answer

What is fireing order on 95 gt mustang gt/gts caneryyellow auto


5.0
V8 Firing Order: 1 3 7 2 6 5 4 8 Distrib. Rotation Is Counter Clock Wise
3.8
V6 Firing Order: 1 4 2 5 3 6
1 2 3
5 6 4 <<<<< Ignition Coil Pack Plug Wire Order

Feb 09, 2009 | 1995 Ford Mustang

1 Answer

We have replaced all the spark plugs in our 1991 jeep cherokee but dont have the diagram of what plug wire goes where. Can you help me?


Which motor i-6 or v8?
look on the intake for firing order if it's the inline 6 from front to back they are numbers in order 1-6,using the timing marks set the engine at 0degrees on compression stroke and number 1 plug wire will be directly above where the rotor button is at I think the firing order is 135624 from number 1 on cap and going clockwise put the plug wires on the cap to the plugs in that order.

Dec 27, 2008 | 1991 Jeep Cherokee Briarwood

1 Answer

Firing Order and Distributor Diagram*.*


if you want to put plug wire from distrobutor to the plugs first check on the distrobutor cover if you can see mark like number one if you see that that is the first cylinder ok next you must know ather remove the distrobutor cover try to start the engine have look the direction which is rotor moving so when you find the direction you start following the direction put the disrobutor cover and follow the direction from one 1342.

Oct 21, 2008 | 1966 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...