Question about 2006 Mercury Mariner

1 Answer

Keypad entry code

I bought a 2006 mariner i need the factory code to reset the pad so i can use it please someone tell me where i can find this. i hear its on a sticker somewhere on the car but im having a hell of a time finding it.any help?

Posted by on

  • 2 more comments 
  • Anonymous Nov 10, 2008

    2005 Mariner - looking for same code. did you find it?

  • jewelz_tx Dec 01, 2008

    I have the same problem with a 2005 Mercury Mariner. Where can I find the factory code?

  • FJS46 Jul 08, 2013

    All you have to do is call the dealer service desk and give them your VIN - they can look up the factory code and you can then change it to your personal code per the owners manual

  • FJS46 Jul 08, 2013

    All you have to do is call the dealer's service desk - they can look up the factory code using your vehicle's VIN. After you have that you can change it to your personal code per the owner's manual. My dealer's service people looked up the code for my 2010 Mariner for free.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Call dealer they will help you out promise

Posted on Dec 23, 2008

  • dodgerblu023 Jun 13, 2011

    Went to dealer. They wanted $65 to do it!

  • FJS46 Jul 08, 2013

    All you have to do is call the dealer's service desk - they can look up the factory code using your vehicle's VIN. After you have that you can change it to your personal code per the owner's manual. My dealer's service people looked up the code for my 2010 Mariner for free.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i find the code on the key pad on my 2006 meecury mariner


The code for the keypad? Should be the same process as for the Ford Escape:

Dec 28, 2016 | 2006 Mercury Mariner

1 Answer

Need to change code on door key pad


  • Enter the five-digit code programmed into the keypad from the factory. Find the key code in the card stored in the glove box of your Mariner.
  • Press the "1-2" button on the keypad immediately after inputting the factory code.
  • Enter the five-digit key code you wish to store for your keyless entry system within five seconds of pressing the "1-2" button.


  • Read more : http://www.ehow.com/how_7442543_program-entry-pad-mercury-mariner.html

    Jul 05, 2015 | 2008 Mercury Mariner

    1 Answer

    Key pad code


    you will need to go see cal or other ford dealer for code abs light comes on when you have a brake problem may need new pads or wheel hub do check it as this is what stops the car and no brakes is no good pat

    Aug 29, 2014 | 2006 Mercury Mariner Hybrid

    1 Answer

    2006 mercury mariner factory code for keyless door pad not working


    Is it the original factory code? If you bought it used and they gave you the code, someone might have put their own code in.and if the D.D.M was replaced it comes with a new code.you can retrieve it, but it has to be done at dealership. Then you can put in your own code.

    Feb 22, 2014 | Mercury Mariner Cars & Trucks

    1 Answer

    2006 Mercury Mariner keyless entry code


    look for a white sticker on the rear hinges on deck lid

    Aug 21, 2012 | 2006 Mercury Mariner

    1 Answer

    How to reset the keypad entry code?


    If you have the original lock door code, can make with this procedure: Owners-Manual (page 65 for Keyless Pad Programing).

    Hope helped.

    Apr 12, 2010 | 2006 Mercury Mariner

    2 Answers

    How do i reprogram keyless entry codes


    door pad keyless codes?

    in owner manual, enter permanent code and then press "1" and enter personal code, then press "1" again. Then both codes will work.

    If you don't have manual, go to Motorcraft.com and click on technical resources and click on your year owner manual.

    ---------------------------------------------
    Each vehicle equipped with a keyless entry keypad is programmed with a five-digit entry code. This code is provided to the customer through a wallet card in the Owner Literature package. In addition, this code is available through a diagnostic tool and is also printed on the vehicle security module label. When entering codes each digit must be entered within five seconds of the previous button press.
    Programming/Erasing Personal Code
    A unique personal five-digit code can be programmed by following these steps:
    1. Enter the factory set five-digit code (the keypad will illuminate when pressed).
    1. Press 1/2 within five seconds of Step 1.
    1. Enter the unique five-digit code.
    The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it will simply overwrite the previous personal code. To erase a personal code, carry out the following procedure:
    1. Enter factory set five-digit code.
    1. Press 1/2 within five seconds of Step 1.
    1. Press 7/8 and 9/0 at the same time within five seconds of Step 2.
    The system will now only respond to the factory set code.
    Anti-Scan Feature
    To provide added security, the keyless entry pad is disabled for one minute after 35 button presses without a valid entry code being entered. The keypad will flash during this one-minute mode with all functionality disabled except for 7/8 and 9/0 still being allowed to lock the vehicle.
    Anti-Scan will be turned off after any of the following events:
    • one minute of keypad inactivity
    • the keyless entry remote transmitter UNLOCK button is pressed
    • the ignition is turned to the ON position.
    Unlocking the Doors with the Keyless Entry Keypad System
    To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will illuminate.
    To unlock all doors, enter either the factory set code or the personal code (driver door unlocks) and press the 3/4 control within five seconds.
    Locking the Doors with the Keyless Entry Keypad System
    It is not necessary to enter the factory set or personal code prior to locking all doors. To lock all doors, press the 7/8 and 9/0 controls at the same time.
    Inspection and Verification
    1. Verify the customer concern by operating the system.
    1. Visually inspect for obvious signs of mechanical or electrical damage.

    Dec 01, 2009 | 2004 Ford F350

    1 Answer

    Help with finding keyless door pad codes and resetting


    Open the trunk and up under the package tray where rear speakers mount,on the passenger side you will see the module.It will be black and have 3 connectors to it.It will have a sticker on it with a 5 digit code.It will also have a sticker on one of the trunk hindges with this code if someone has not removed it.Here is how the system works:

    Keyless Entry Keypad To unlock the driver front door (20124), and disarm the anti-theft alarm control (19A366) (if equipped):
    • Enter the permanent factory code.
    • Enter the owner's alternate code.
    To unlock the passenger door(s), press the 3/4 button within five seconds of unlocking the driver front door or luggage compartment door (40110) . To unlock the luggage compartment door, press the 5/6 button within five seconds of unlocking the driver or passenger door(s). To turn on the interior lamps (13776) and light all illuminated components, lift either front door handle (22404) and press any button on the keyless entry keypad (14A626) . To lock all doors, press the 7/8 and 9/0 buttons at the same time. (It is not necessary to enter the key code first.) This will turn off courtesy lamps. To program a temporary code:
    • Enter permanent code.
    • Within five seconds of pressing last button of permanent code, press 1/2 button.
    • Enter any alternate five-digit code within five seconds of pressing 1/2 button.

    Apr 15, 2009 | 1995 Ford Taurus

    2 Answers

    Keypad keyless entry code missing


    Ford has an add on keypad also if it is pretty much flush on the door it is factory if it is a fat keypad it is an add on The factory module is under the dash by the fuse panel the number should be on it

    Oct 15, 2008 | 2006 Ford F 350 Super Duty

    Not finding what you are looking for?
    2006 Mercury Mariner Logo

    Related Topics:

    386 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mercury Experts

    yadayada
    yadayada

    Level 3 Expert

    70347 Answers

    Ron Lankford

    Level 3 Expert

    5386 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22041 Answers

    Are you a Mercury Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...