Question about 1992 Honda Accord

3 Answers

Flashing shift indicator light

Indicator light is flashing constantly in the D4 position

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same problem, turned out 2 be a leak in a radiator hose dripping on spped controll sensor and transmission sensor,

Posted on Jun 26, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 589 Answers

A flashing D4 light means a transmission error code is stored in the cars computer.

Is could be something as simply as a cable adjustment.

Without knowing the actual trouble code, it's hard to tell.

Posted on Jun 24, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Vehicle speed sensor

Posted on Jun 01, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

92 honda accord lx - flashing d4


This light is indicating a fault in the automatic gear box, it can be excessive slippage (you may feel nothing unusual) or other problems. you must have it scanned by a dealer or ****** repair shop to find out what is causing the light to come on.

Sep 28, 2012 | Cars & Trucks

1 Answer

D4 light flashes


D4 light flashing indicates a problem with the transmission. Need to pull trouble code from transmission control unit to find out what is wrong. most likely it is a shift solenoid going bad.

May 19, 2012 | 1992 Honda Accord

2 Answers

D4 lite flashes


Flashing D4 light is an error from the TCU (transmission control unit), so you got something going on with your transmission. If you want to pull the error code, remove the passengers side kick panel and look for a pair of wires with a blue connector at the end. Stick a paper clip or some other piece of wire into each hole of the connector to short the wires. Put your key in the ignition and turn 2 clicks. The D4 light will flash the code...short flashes=1 and long flashes=10. Add the number of short and long flashes to get your code. Errors are below:

0-Transmission control unit (TCU) faulty.
1-Lock-up solenoid 'A' circuit open or shorted.
2-Lock-up solenoid 'B' circuit open or shorted.
3-Throttle Position Sensor circuit open or shorted.
4-Vehicle Speed Sensor open or shorted - No signal from speedometer.
5-Shift Lever Position Switch circuit shorted.
6-Shift Lever Position Switch circuit open.
7-Shift Solenoid 'A' circuit open or shorted.
8-Shift Solenoid 'B' circuit open or shorted.
9-Counter shaft or transmission speed pulse generator open or shorted.
10-Coolant Temperature Sensor open or shorted.
11-Engine RPM (Ignition coil signal) open or shorted.
12-(No code 12 used)
13-Main shaft speed pulse generator open or shorted.
14-Linear (line pressure control) solenoid open or shorted.
15-Kick down switch circuit shorted.

Hope helps.

Aug 03, 2011 | 1992 Honda Accord

1 Answer

D4 light on no matter what gear i'm in. 95 Honda Accord LX 4-cylinder. Already replaced solinoid, speedometer, fan,


The D4 light is coming on to tell you that there is one or more fault codes set in your transmission control module. The only way to retrieve codes on the 1995 models is to read "Flash Codes" output by the D4 light. (See instructions below)

RETRIEVING FLASH CODES USING THE D4 LIGHT
If fault codes are present, the D4 light will "blink" when the ignition is turned to the RUN position and will remain on at all times when the engine is running.
To retrieve the flash codes, turn the ignition switch off.
Install a jumper wire between the service check connector terminals.
The service check connector is a gray, 2-pin connector located on the PCM/TCM cover under the passenger side of the instrument panel. (See picture below)

CAUTION: DO NOT use the 3-pin located next to the service check connector.

Installing the jumper will place the PCM/TCM in diagnostic test mode.
Turn the ignition to the RUN position. Codes will be output by blinking the D4 light.
Note the number of blinks from the D4 light. A short blink indicates a single digit flash code. A long blink equals 10 short blinks. For instance one short blink indicates code 1. One long blink and four short blinks indicates code 14. If there is more than one fault code, they will be output one at a time from the lowest numbered code to the highest numbered code. It is recommended that you read the code or codes several times to make sure that you are reading it correctly.

Once you have retrieved the fault code(s) re-post your question and include the information for what codes you have and someone can then help you locate the cause of the problem.

May 22, 2011 | Honda Accord Cars & Trucks

2 Answers

The D4 is flashing can you tell me why


This is involved. When the D4 light blinks, it is indicating a problem with the input or output systems for the A/T. If you find your Service Check Connector (it should be near or at the top of the kick panel on the passenger's side; it's usually blue and has two holes in it; it is at the end of a wire so don't look for a fixed unit; it is often simply tucked in behind the top of the kick panel. You should pull the kick panel out to find it) you can insert a paper clip so that it connects the two holes. Then, if you turn your ignition to ON II (do not start the car) the D4 light will blink out a code, using both long and short blinks. The blinks have to be carefully counted. Problem codes 1 through 9 care indicated by short blinks. Problem codes 10 through 15 are indicated by a series of long and short blinks (you have to add them together to get the code).

Locate the two-pin female diagnostic connector behind the glove box. Use a very small jumper wire or paper clip to connect the two pins. Turn key on, (do not start the engine). The D4 light should start flashing. Note that it may do long and short flashes. The long flashes mean 10. (Example, three long flashes followed by two short flashes means trouble code 32.) Possibly it could pause and display several codes, so be sure and let it run through it's cycle a few times and carefully count the flashes.

There are more than 40 codes listed in the service manual, so respond with yours and I'll tell you what the service manual says about it.

I tell you all this to indicate that the procedure is fairly involved, and since you probably don't have a list of what the codes mean, I would have to say that it would be best to find, if you can, a Honda dealer to read the codes and check your transmission. Most of these problems are connector or sensor related and are usually indicated by the transmission not shifting from one gear to another, or by the transmission jerking hard when it shifts. If your having no problems and you are in a position to not have access to a Honda service department, you can find the backup radio fuse in your engine compartment fuse box and take it out(not with the car running) for 10 seconds or so, then put it back. It will clear the computer. If the D4 starts blinking again, it would indicate that the warning was not just a glitch.

Hope helps.

Aug 18, 2010 | 1995 Honda Accord

1 Answer

92 honda accord D4 light flashing


Flashing D4 light is an error from the TCU (transmission control unit), so you got something going on with your transmission. If you want to pull the error code, remove the passengers side kick panel and look for a pair of wires with a blue connector at the end. Stick a paper clip or some other piece of wire into each hole of the connector to short the wires. Put your key in the ignition and turn 2 clicks. The D4 light will flash the code...short flashes=1 and long flashes=10. Add the number of short and long flashes to get your code. Errors are below:

0-Transmission control unit (TCU) faulty.
1-Lock-up solenoid 'A' circuit open or shorted.
2-Lock-up solenoid 'B' circuit open or shorted.
3-Throttle Position Sensor circuit open or shorted.
4-Vehicle Speed Sensor open or shorted - No signal from speedometer.
5-Shift Lever Position Switch circuit shorted.
6-Shift Lever Position Switch circuit open.
7-Shift Solenoid 'A' circuit open or shorted.
8-Shift Solenoid 'B' circuit open or shorted.
9-Counter shaft or transmission speed pulse generator open or shorted.
10-Coolant Temperature Sensor open or shorted.
11-Engine RPM (Ignition coil signal) open or shorted.
12-(No code 12 used)
13-Main shaft speed pulse generator open or shorted.
14-Linear (line pressure control) solenoid open or shorted.
15-Kick down switch circuit shorted.

Aug 11, 2010 | 1992 Honda Accord

2 Answers

2000 accord ex w/ 4 cylinder engine. The light around the D4 (indicating gear) flashes and the car accelerates very slowly in cold weather until the engine gets warm. What is wrong? How to fix?''


The D4 indicator light flashing indicates that your car's computer believes that there is something wrong with your transmission.

This is what the manual for your 2000 Accord says:

The "D4" indicator comes on for a few seconds when you turn the ignition switch ON (II). If it flashes while driving (in any shift position), it indicates a possible problem in the transmission. Avoid rapid acceleration and have the transmission checked by an authorized Honda dealer as soon as possible.

Sometimes this will mean that you are simply low on transmission fluid, but you really should have it checked.

Hope this helps you.

Jan 04, 2010 | 2000 Honda Accord

2 Answers

1993 honda accord engine service light is on and Shift drive D4


If the drive light flashes there COULD be a trans problem. The Ck Engine light and the D4 light are on for the same reason. Take it to a qualified repair shop to have it checked out. Find a shop that regularly works on HONDA and not some chain store operation.

Nov 20, 2009 | 1993 Honda Accord

1 Answer

Flashing D4


yes it will matter that the switch is v tec....AND I WOULD REPLACE THAT SHIFT SOLENOID AS WELL ...THE THROTTLE POSITION USUALLY ISNT THE PROBLEM WITH THIS PARTICULAR MODEL..first the v.s.s and the shift solenoid is most likely the culprit

May 11, 2009 | Honda Accord Cars & Trucks

1 Answer

Gear Position light D4 is always flashing irrespective of gear.


This issue is caused by a transmission fault or malfunction, most likely a shift solenoid in the trans has failed or the trans control module has a problem, the trans can be tested for codes that will show what circuit or component of the trans controls is causing the light to stay blinking, have it tested.

Dec 12, 2008 | 1995 Honda Accord

Not finding what you are looking for?
1992 Honda Accord Logo

Related Topics:

1,018 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...