Question about 2001 Mazda Millenia

1 Answer

Thanks Max!..for the answer on the rasping '98 Millenia, but..

....why is the rasping just starting? I've had the vehicle since 2001 and only recently the rasping has begun. Are you saying it's normal wear and tear for this model maybe? Should I look forward to the noise from now on because there is no fix and no ultimate problem coming? If so, then I thank you again, and won't worry about it.

Posted by on

  • Cheese2 Jun 26, 2008

    Thanks, Max! I won't worry about it!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 43 Answers

Don't worry any more about it

Posted on Jun 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 mazda millenia


The coils are held in by one or two machine screws just rmeove them and pull out the colils. If there is oil in the wells you will need a vavle cover gasket(s)

Jul 02, 2012 | 2001 Mazda Millenia

1 Answer

I have a mazda millenia 01. I put a different cd player in my car. Cd playee would not play and engine light is on now. When i first start my car the gages go up, then back down.. lights on inside...


You apparently have a vehicle with the Anti-theft system on the Audio system. I would put the original player back in to avoid future problems! The vehicle will behave erratically while the replacement unit is installed!

Apr 27, 2012 | 2001 Mazda Millenia

1 Answer

Spark plug replacement wiring sequence for 1998 mazda millenia


Misfirng...

1998 Mazda Millenia S 2.3 liter DOHC V-6

12_23_2011_2_40_22_am.gif


1998 Mazda Millenia L 2.5 liter DOHC V-6

12_23_2011_2_41_22_am.gif


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day and Merry X-mas.

Dec 23, 2011 | 1998 Mazda Millenia

1 Answer

Car has white smoke coming from tail pipe


sounds like a blown head gasket letting coolant get injected into the engine and getting burned with the fuel. a head gasket replacement should help

Apr 07, 2010 | 2001 Mazda Millenia

1 Answer

Check engine light/2001 Mazda Millenia


The check engine light comes on when there is a problem with your engine and throws a code which it then stores. That code can be "read" by an OBDI/OBDII scanner and should give you the info you need. If it was scanned and the codes "read" the check engine light should of been re-set. If your car is running well have your mechanic re-set it; if it comes on again take it and have it checked again. No system is fool proof and there may still be a problem. Hope this helps.

Aug 31, 2009 | 2001 Mazda Millenia

1 Answer

My hold light is flashing in my 2001 mazda millenia


hold light flashing means you have a transmission fault of some kind, check vehicle speed sensor

Jul 02, 2009 | 2001 Mazda Millenia

2 Answers

98 mazda millenia shaking front end at 40 mph?? any clues??


try the simple solution first put your front tires on back and back tires on front. check your air pressure then take it for a drive and see if any thing has changed. if so you probably have a badly worn tire. if no change have someone move the steering wheel back and forth wyle you are under the fornt of the car (dont forget to chalk the wheels) and see if any of your steering components are loose/moving. if nothing is loose and your tires are good try to bounce the front end. if you can really get the front of the car going up and down pretty easy you havce bad struts/shocks.

Apr 15, 2009 | 2001 Mazda Millenia

1 Answer

Shifting problems


I think you are saying the vehicle pulls forward,no matter what gear you put the shifter in?If this is the case,there is a problem with the forward clutch.I've seen this one over and over in many different transmissions and vehicles.The forward clutch pack is always applied whenever the vehicle is moving forward.It is never applied in reverse,or neutral.So,the forward clutch pack loses clearance from normal wear and tear,or a seal in the pack goes bad,and the clutches start slipping....and slipping........still slipping.....until they get SO hot,the clutch plates and steel plates fuse together,are welded together.This is why your Millenia is going forward in reverse and neutral.It's either that or you have a problem with the shifter cable,or linkage,and you didn't mention anything about the detents,or not being able to obtain Park,so i assume all that is ok

Jul 10, 2008 | 2001 Mazda Millenia

1 Answer

Rasping noise when starting


No it is normal bicause the car is "cold". When the motor gets the working temperature the noise stop's.

Jun 23, 2008 | 1998 Mazda Millenia

Not finding what you are looking for?
2001 Mazda Millenia Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...