Question about 1991 Dodge Dynasty
Check the ignition coil use an ohm meter and check resistance of the coil especially after it won't stqart coil may be heating up and causing open circuit. Have seen this several times.
Posted on Jul 05, 2008
This could be due to the spark plugs being fouled out. Try removing them and check to see if they are wet or dirty. If so try and clean them or replace them. See if this helps. If it does not it could also be the temperature sensor that the ECM uses to callibrate the mixture according to the temperature. Good luck.
Posted on Jun 24, 2008
Tips for a great answer:
Sep 03, 2014 | Cars & Trucks
Jun 24, 2013 | Cars & Trucks
Jun 14, 2012 | 1988 Dodge Dynasty
Sep 06, 2011 | 1991 Dodge Dynasty
Nov 15, 2010 | 1991 Dodge Dynasty
Oct 16, 2010 | 1989 Dodge Dynasty
Jun 06, 2010 | 1992 Dodge Dynasty
May 26, 2010 | 1991 Dodge Dynasty
Jun 22, 2009 | 1990 Dodge Dynasty
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: