Question about 2003 Ford Explorer

2 Answers

Pcv valve where is the pcv valve on a 2003 ford explorer 4.0L sohc

Posted by on

  • 5 more comments 
  • pawangill75 Jun 25, 2008

    and where is the valve cover i heard its behind the engine block in front of the firewall or around the brake booster i ve heard its behind the driver side door i need more details please

  • ourlife22 Oct 06, 2008

    NOT ABLE TO LOCATE THE PCV VALVE ON 2003 FORD EXPLORER WHERE IS IT LOCATE?

  • beetle bat Dec 07, 2008

    1998 ford explorer 4.0 l v6 canot find location of the pcv valve.

  • eduardoelias Dec 11, 2008

    Hello!
    Nonencounter valve PVC in my Ford Explorer 2002 XLT, 4,0 V6.

    If they can put some photograph to find it, thank you very much

  • Anonymous Mar 01, 2009

    2002 ford explorer with flex fuel v6 4.0 cant find the pcv valve help

  • Anonymous Mar 15, 2014

    does it cause valve and piston damage when a timing chain fails on a 1998 ford 4.0 sohc

  • Anonymous Mar 21, 2014

    location of pcv valve on 1995 ford explorer

×

2 Answers

I have a 98 4L SOHC . The valve seems to be behind the intake manifold. The emissions diagram shows 2 hoses going to it. Local dealership swears Part #EV225 is correct. You would not believe how much of the internet is devoted to this situation

Posted on Sep 23, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

Normally located on top of the valve cover.

Posted on Jun 24, 2008

2 Suggested Answers

Handy Mike
  • 6 Answers

SOURCE: how do i replace the pcv valve on a 2000 explorer xlt v6 sohc?

On the passenger side of the intake manifold, coming off the bottom about the center of the engine front to back, you'll feel a hose that comes off a nipple. That hose makes a 90 degree bend and goes around to the rear of the motor. Where that hose meets the Y-connector from the other side of the intake you'll find the PCV valve. It's almost impossible to see it with the hood installed, and even tougher to reach it.

A good source of information for Ford Explorers can be found here

Posted on Oct 25, 2008

  • 1 Answer

SOURCE: pcv valve :where is it located on a 1999 ford explorer sport 2wd

It is located at the back of the engine near the fire wall. It is gray with a T connector at the top with two hoses coming off of the T and going forward into the intake manifold.

Posted on Mar 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a Vacuum diagram for a 2003 ford explorer 4.0 sohc please help!


I went and got library card for free so I could get on chiltons manual from home computer. its great

Jul 03, 2012 | 2003 Ford Explorer

1 Answer

I have 2003 Explorer with 4.0L V6 engine. PCV valve is really loose and won't stay inside the hole in valve cover. As a result oil is sipping through. When I checked using mirror and flashlight, the hole...


Yes - It should have a plastic grommet type thingy to sit in. Just push in, no threads.
Try to find one in junk yard or order from dealer.. How much could they cost?
You could try an actual grommet.. but must be oil resistant.

Nov 13, 2010 | 2003 Ford Explorer

1 Answer

Need 2 loc8 PCV on 1999 Exploer 2WD 6CYL SOHC.


The pcv valve is typically located in the valve cover near the brake booster which is on the drivers side

Jan 20, 2010 | 1999 Ford Explorer

1 Answer

Locate pcv value


in the valve cover

Jan 09, 2010 | 2003 Ford Explorer

3 Answers

Pcv valve :where is it located on a 1999 ford explorer sport 2wd


It is located at the back of the engine near the fire wall. It is gray with a T connector at the top with two hoses coming off of the T and going forward into the intake manifold.

Feb 10, 2009 | 1999 Ford Explorer

1 Answer

2001 Ford Explorer Sport


pcv is on the back side(firewall) of the drivers side valve cover.held in buy lock tabs,turn then pull to remove.

Nov 10, 2008 | 2000 Ford Explorer

1 Answer

1998 Ford Explorer sport 4.0L 4x2 PCV Valve Location


the pcv is located on the rear(firewall) of the drivers side valve cover.turn counterclockwise and pull to remove be careful there are 2 small tabs inside the pcv hole in the valve cover(can feel with small finger) this is to hold valve in place so it wont leak.if you have a oil leak at the pcv a quick fix is to put a small amount of silicone around the pcv o-ring and install.wait hours for silicone to set up.

Sep 25, 2008 | 1998 Ford Explorer

1 Answer

How do i replace the pcv valve on a 2000 explorer xlt v6 sohc?


On the passenger side of the intake manifold, coming off the bottom about the center of the engine front to back, you'll feel a hose that comes off a nipple. That hose makes a 90 degree bend and goes around to the rear of the motor. Where that hose meets the Y-connector from the other side of the intake you'll find the PCV valve. It's almost impossible to see it with the hood installed, and even tougher to reach it.

A good source of information for Ford Explorers can be found here

Jul 22, 2008 | 2000 Ford Explorer

1 Answer

Code #P0171 & code #P0174


The most common problem on a Ford with these codes is deteriorated PCV hoses. Check the hoses from the PCV valve to the intake manifold. Pay special attention to the rubber elbows. They often crack on the inside curve and the crack is hard to see.

May 19, 2008 | 1999 Ford Explorer

Not finding what you are looking for?
2003 Ford Explorer Logo

973 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...