Question about 2005 Chevrolet Silverado 2500HD 2WD

1 Answer

Wheel bearings on 2005 HD 2500

I have an 2005 HD 2500 crew cab truck and it has a 6" lift. I keep going through front wheel bearings. What can I do?

Posted by on

  • mroberts Jun 23, 2008

    My truck is 4x4

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 121 Answers

I just came across your posting, If you're still having this issue, it may be due to the offset of your wheels. Too much offset can cause excessive load on the outboard bearings. If you have wheels that move the centerline of the wheel too far outboard of the bearing, then you will generally be putting too much stress on the bearing/hub assembly. as you know your vehicle has a unitized bearing assembly. If the bearing is being overloaded on the outer edge by too much offset it will fail over time. hope this helps

Posted on Oct 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need parts for a 2007 Nissian Frontier. What other years are compatiable with a 2007?


Depending on the sub-model, 2005 - 2012 versions *can* fit. Look for yours in the list below:

  • Fit note: Crew Cab Pickup, Extended Cab Pickup
This product fits the following Nissan Frontier submodels
  • 2013-2013: Desert Runner; 6 Cyl 4.0L;
  • 2011-2013: S; 4 Cyl 2.5L;
  • 2011-2013: SL; 6 Cyl 4.0L;
  • 2011-2013: SV; 4 Cyl 2.5L;
  • 2011-2013: SV; 6 Cyl 4.0L;
  • 2009-2013: PRO-4X; 6 Cyl 4.0L;
  • 2011-2012: S; 6 Cyl 4.0L;
  • 2008-2010: SE; 4 Cyl 2.5L;
  • 2005-2010: LE; 6 Cyl 4.0L;
  • 2005-2010: SE; 6 Cyl 4.0L;
  • 2005-2010: XE; 4 Cyl 2.5L;
  • 2005-2008: Nismo Off-Road; 6 Cyl 4.0L;
When calling to inquire or order - tell them the year, make, model (S, SL, SV, LE, SE, XE, etc.) Cab type (crew, extended, etc.) before paying. Have a look at the link below.

2005 2012 Nissan Frontier Tail Light Replacement Driver Side...

May 13, 2014 | 2007 Nissan Frontier SE Crew Cab

1 Answer

Change battery in 2012 silverado 2500


take positive and negative cables off of battery. now take battery hold down bolt out from back side of battery nearest to the cab. now lift battery out.

Nov 25, 2013 | 2012 Chevrolet Silverado 2500HD Work Truck...

1 Answer

Chevrolet 2002 crew cab HD 4x4. Any suggestions


i have a 04 sierra 2500 hd, i put a spectre cold air intake and it boosted my economy to 11 city 16 hway and it was only 150 at autozone

Mar 21, 2010 | 2007 Chevrolet Silverado 2500HD

1 Answer

2004 silverado 4x4 2500 left front wheel bearing


  1. Raise and support the vehicle.
  2. Remove or disconnect the following:

    Tire and wheel assembly Caliper and rotor Wheel speed sensor and brake hose mounting bracket bolt from the steering knuckle Electrical connection for the wheel speed sensor Front drive halfshaft assembly on four wheel drive models Hub and bearing assembly mounting bolts Hub and bearing assembly O-ring seal from the steering knuckle bore (2500 series)
  3. Clean and inspect the O-ring seal
To install:
  1. Clean all corrosion or contaminates from the steering knuckle bore and the hub and bearing assembly.
  2. Install the O-ring to the steering knuckle (2500 series).
  3. Lubricate the steering knuckle bore with wheel bearing grease or the equivalent.
  4. Install or connect the following:

    Hub and bearing assembly Hub and bearing assembly mounting bolts. Tighten the bolts to 133 ft. lbs. (180 Nm). Front drive halfshaft assembly on four wheel drive models Electrical connection for the wheel speed sensor Wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle. Tighten to 106 inch lbs. (12 Nm). Rotor Tire and wheel assembly.
You can go to autozone.com and register for free online repair manual with everything you need.

Jan 19, 2010 | 2004 Chevrolet Silverado 2500 Crew Cab

2 Answers

2500 hd duramax crew cab 4 WD pulls right. Both


First try rotating the tires to the rear. Does it go away? If you apply the brakes does it pull to the left? Could be a draging caliper or the slides may be hanging up.

Aug 03, 2009 | 2004 Chevrolet Silverado 2500HD

1 Answer

Front wheel bearing/tools


big spanners, or shifter, deep sockets, hammer, drift, screwdriver, and clean cloth. don't forget the bandaids,

Jan 27, 2009 | 1996 Ford F250 Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...