Question about 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Ford f250 diesel 2002

I need to know how to take apart the front brakes any suggestions?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Just changed rotors, pads and calipers and never touched the tie rod ends. two bolts and caliper comes off, slide pads off, collapse the pistons on caliper, slide new pads on, and replace caliper. be careful of the brake lines, no too much extra. while you have caliper off, inspect the rotor for cracks and wear. price to replace rotor not too bad, bout 130 dollars at national chain auto part stores

Posted on Mar 05, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

Its has to come of from the back. Is a 45 min job in at the dealer, so it is a big job. All the bolts for taking it off are in the back,plus you have to take every thing of thats in the way, tire rod end, etc.

Posted on Jun 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque specs for brake calipers on a ford explorer sport front calipers


  1. Torque Specs For F250 Caliper Bolts - Diesel Forum - TheDieselStop.com

    www.thedieselstop.com > ... > 1999-2007 General Questions Jan 13, 2009 - 3 posts - ‎1 author
    Does any one know what the caliper bolts torque specs are? ... Disc brake caliper pin bolts - Excursion, F-250/F-350 with Ford and Dana axle ... Torque specs for front brakes
    5 posts
    Mar 12, 2009
    05 F250 brake torque specs please
    6 posts
    Aug 22, 2007
    Brake caliper torque specs
    5 posts
    Jul 14, 2007
    Front brake Caliper Bolt Torque
    6 posts
    Apr 25, 2005
    More results from www.thedieselstop.com

Jul 11, 2015 | 1998 Ford Explorer

1 Answer

2002 ford f250 brake lights flash when you rock or shake the truck. already changed bulbs and brake light switch


Grab the main harness where it exits the firewall and move it around to see if you can make it happen. Continue working down the harness down along the frame towards rear of truck, It was a problem on the diesel models back then

Dec 04, 2013 | 2002 Ford F250 Super Duty SuperCab

2 Answers

F250 HPOP NO Start


if you are talking about the injector pump it will need to be bled, loosen the fuel lines at the injectors and turn theengine over till you get fuel out of them all close them and start engine it may take a little to get it started, then loosen each injector one at a time to purge any air left in the system

Jul 30, 2010 | 2002 Ford F250 Super Duty SuperCab

1 Answer

I have a 2002 ford f250 7.3 diesel with a drive shaft vibration at around 45mph. It has a 2 piece drive shaft. The large rubber bushing around the drive shaft in carrier housing is somewhat collapsed on...


hello, i have a chevrolet dually, the carrier bearing, in mine was doing this, i took it apart, pulled both driveshafts apart then took carrier bearing off, the bearing inside was dry, plus they had a bblue look to them, bearings was bad, plus rubber around the bearing was dry rotted, there is know way of greasing these bearings because they are sealed, i pull bobcats, tractors, with mine if you use it for a lot of heavy pulling, they dont last a long time, chevrolets carrier bearing is all made together, bearing and rubber is made together, on mine, seems like i paid about 35.00 dollars for mine, spray some wd-40 around driveshaft where it goes into bearing, i had to take a hammer to mine to get it off front drive shaft, it was stuck pretty bad.

Apr 08, 2010 | 2002 Ford F250 Super Duty SuperCab

2 Answers

Ford f250 diesel . front brakes come on when driving, don't have to use brakes. changed all calipers and hoses. if i bleed the calipers then they will start to release, sometime you can hear the brake...


sounds like a bad master cylinder, next time brakes are locking up , open bleeder screw and see if that releases brake at that wheel if it does then replace master cylinder, good luck.

Oct 13, 2009 | 2002 Ford F250 Super Duty SuperCab

1 Answer

I'm replacing the left front brake hose and need to know if I have 4 wheel or 2 wheel anti lock brakes..


if you have anti lock brakes ususlly there all anti lock but to be sure look at the brakes there should be a sensor at each wheel.

Jul 06, 2009 | 2002 Ford F250 Super Duty SuperCab

1 Answer

2002 f250 brake problem


Your brake master cylinder is faulty.

Jun 02, 2009 | 2002 Ford F250 Super Duty SuperCab

1 Answer

REPLACING LOWER BALL JOINTS ON 2000 FORD F250 4X4 7.3L DIESEL


hello,yes you do have to take the hub off to replace the ball joint with the ball joint being on the back side of the hub. hope this helps and please rate this.

Mar 15, 2009 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Front hubs sticking in locked position need to rebuild, How to and any suggested parts for replacement


replace your auto/lock hubs with WARN manual lock hubs,this will save you hunderds.as long as you dont mind having to get out to lock in. NAPA.

Oct 18, 2008 | 2000 Ford F250 Super Duty Crew Cabs

Not finding what you are looking for?
2000 Ford F250 Super Duty Crew Cabs Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...