Question about 2006 Chevrolet Equinox

2 Answers

WON'T START PURCHASED A 2006 EQUONIX at times the car seemed not to want to start and a couple times seemed like the ignition would get stuck in turn over position anyway drove my car yesterday no problem got home parked it daughter got in it hour later to leave and would not start nothing.. what's funny I have asked the dealership for a manual for the car for the last months since having it oh its on order, have no clue where the battery is or much less how to jump the car off. New car sitting in my driveway only car I have and cannot be driven, had it a month.. suggestion as to what the problem is on this car?

Posted by on

  • 1 more comment 
  • elvins girl Jul 23, 2008

    went to the neighborhood store approximately 1 mile from my house. when i got to the store i turned the car off like usual. when i got in the car to start it nothing happened, the dome lights and dash lights came on for just a second and when i turned the key everything went off. it almost seemed like it was draining. the lights went from bright to dim to off. as soon as i remove the key the lights come back on. when i turn the key again the same thing happens and the engine does not even turn. please help

  • Anonymous Aug 09, 2008


    • I am having the same problem with 2006 chevy equinox, wont start,

    • turned the key ,heard a click , a flash of light that went to dim and then off and now can turn the key , heard sort of a moaning, not firing noise and a brief show of light on the dash then to dim again.

    • Is this the alternator? If so Is it hard to remove and can I do it without any special tools.How much should I pay to get it diagnosed or fixed.

  • Anonymous Dec 13, 2008

    2006

×

2 Answers

There were problems with the ignition cylinder. Occasionally gets stuck and electrical contacts may not work properly.

Posted on Sep 20, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

Alternator. take it off and take it down to an auto parts store and have them test it

Posted on Jun 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2006 suburban will not start battery is good. I jumped it a couple days ago and know i have this problem


Sounds like a stuck starter relay to me. I would try replacing the relay in the fuse panel ( there are usually several of the same size and type of relay that you can substitute for diagnostic purposes. if it works then you buy a new one. Cheap and easy way to see if it is going to fix the issue. hope this helps if I doesn't feel free to update

Jul 18, 2014 | 2006 Chevrolet Suburban 1500

2 Answers

My mercedes ml350 won't sart..when i turn the ignition it makes a sound but the engine won't start


I don't know if this is helpful but an engine needs three things to work. Air, fuel, spark.

Jan 15, 2013 | 2006 Mercedes-Benz ML 350

1 Answer

2006 Cobalt LS Coupe Intermittent Starting Problem


sounds about right, probably is ignition switch, reason you don't get codes is because if power is'nt connecting to engine while problems occurs then ecm won't pick it up. you should have 2 ignition switches, (the lock cylinder and key switch, the other is the electrical, usually located under the dash, and commonly atttatched to the column close to the firewall, check connections first, it may just be a loose plug in connection

Sep 09, 2012 | 2006 Chevrolet Cobalt LS

1 Answer

Stuck eldorado key in DTS ignition now car won't start


Make sure your steering wheel isn't locked. Sometimes a key won't turn until you jiggle the wheel while trying to turn the key.

Aug 21, 2012 | 2004 Cadillac DeVille DTS

1 Answer

Car wont start..after i stuck wet keys in ignition


Give the key-hole a few days to dry out. There are electronics inside the key-hole that sense the key's position and the immobilizer chip within the key. If these short out, or any other circuits with them, the car won't start/run properly.

Jun 19, 2012 | 2006 Chrysler 300

1 Answer

2006 VW Jetta 2.0T won't start


open your ignition key and hit the starter tow three times and one the solenoit softly the you try to start.

Jun 04, 2012 | 2006 Volkswagen Jetta 2.0T

1 Answer

I have a 1998 Ford Windstar. Got in to drive, turned the key to start and 'snap' something seems to have broke within the ignition lock cylinder... all of the accessories are on... the key...


This happened to to me with my ranger. I went and bought in ignition and a junk yard and no problems after that. That way your not out of a lot of money.

Jun 02, 2011 | 1998 Ford Windstar

1 Answer

2006 GMC ENVOY starter not turning over, with ignition switch on.


the ignition switch is a problem with these vehicles so that would be my first call.

Oct 09, 2009 | 2006 GMC Envoy

1 Answer

How do you reset "change oil soon" light in a 2006 ford freestar?


Some cars require you to pump the gas pedal a couple of times (2-3) with the ignition switch on (don't start the vehicle). Then turn the ignition switch off then start the vehicle.

Apr 25, 2009 | Ford Freestar Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...