How do i bypass daytime running light sensor on 2006 chev cobalt ss? (Canadian Version). Is there a relay or something i can hook up to it to cancel the photo cell?

Question edited for clarity and add CAPS.
Question move to Cobalt category.

It is dumping extra fuel.

P0171 code SS SC - Cobalt SS Network

CobaltSS.net https://www.cobaltss.net > forums > p0171-code-ss-sc-...
Mar 1, 2014 - P0171 is a fuel trim lean code. Meaning the car is having to add more than 25% of the normally asked for fuel to reach proper O2 sensor ...

P0171 code
Jan 14, 2012
P0171 code "Bank 1 system too lean"
Nov 9, 2013
P0171 on 2007 SS/SC - Stock
Jul 15, 2009
2.2 P0171 Fix??
May 7, 2007
More results from www.cobaltss.net

For those with the FAMOUS P0171 CEL - Cobalts SS

cobaltss.com https://www.cobaltss.com > threads > for-those-with-th...
About the FAMOUS P0171 DTC (diagnostic troubleshooting code). If the PCM detect a lean condition (roughly 15% leaner than stock or more lean), this code ...

Missing: 2.0. ‎' Show results with: 2.0.

P0171 Chevy Cobalt: Fuel Trim System Lean Bank 1

700r4transmissionhq.com https://www.700r4transmissionhq.com > p0171-chevy...
Jul 28, 2018 - It indicates that your Chevy Cobalt is running lean on the bank one side. It's the most common air/fuel mixture-related code. It's not the most ...

‎Definition · ‎Symptoms · ‎Causes

Question edited for clarity.
Question moved to model category.

Yes there is. Articles and Videos

https://www.google.com/search?q=2006+Chevy+Cobalt+SS.+Relearn+crankshaft+position+sensor

..

Question edited for clarity.
Question moved to model category.

Oil pressure sensor or crank sensor?

https://www.google.com/search?q=Cobalt+SS%2C+oil+leak+behind+starter

..

It is located in the underhood fuse/relay box , marked DRL 10 amp fuse ! Also if that is good check the DRL relay in the same fuse/relay box .Your light sensor could also be bad .
The daytime running lamps (DRL) will operate when the ignition switch is in the RUN position, for automatic transmissions (A/T), the gear selector is not in the PARK position, the headlamp switch is in the AUTO position, and for manual transmissions (M/T), the park brake is released. When these conditions have been met and the ambient light sensor indicates daytime conditions, the DRL will illuminate. The ambient light sensor is a light sensitive transistor that varies its voltage signal to the body control module (BCM) in response to changes to the outside (ambient) light level. When the BCM receives this signal it will either turn on the DRL or the headlamps for auto headlamp operation. Any function or condition that turns on the headlights will cancel the daytime running lamps operation. The DRL can be manually turned OFF by depressing the AHL/DRL switch in the headlamp switch
Do you know that on inside of fuse box lid it shows what fuse is what .

http://repairguide.autozone.com/znetrgs/repair_guide_content/en_us/images/0996b43f/80/7c/be/01/medium/0996b43f807cbe01.gif

725 camshaft sensor 2009 Chevy Cobalt SS Cam Sensor Location

if top light working itis not the switch have you checked the bulbs

You do not need any other relay. Pull the relay out and drive to your next dealer ship. The dealer need to change the country code via ODB II system to U.S.A. After changing the country code, the DRL is of.

take the car to a repair shop or dealer it sounds as if there is a faulty sensor . this can damage the convertor if left unrepaired and become more expensive .

perhaps i missed something here... lowbeams and daytime lights are about the same.... be that as it may... the merely obvious thing is that the low beams are burnt out.... next thing would be that the relay for the day time lights could be defective... it's often mounted on the firewall.

Robert