Need instructions for fuel filter replacement? 1st you'll need to loosen the gas cap to releive the pressure from the gas tank. the fuel filter is located on the frame under your drivers side door. you may need to jack the truck up, if so make sure to use jackstands under the truck for your safety!!follow the fuel line to the filter, a round cylider type canister. use safety glasses, just in case the fuel leaks, for your eye safety,i recommend that!! there will be a plastic retaining clip on both sides of the fuel filter, you'll need a pair of needle nose pliers to remove those, one at a time, the filter will have fuel still in it so be careful as not to spill it into or onto yourself. after you reve each clip the filter can be removed by pulling gently on each fuel line. replace ment is the same way, just make sure the fuel lines are connected properly, the filter will be marked with an arrow showing fuel flow the arrow on filter should point towards the engine, make sure both fuel lines are pushed in, and plastic clips snap into place, when you start truck, make visual check for leaks!! if leaking, the plastic clips are'nt properly installed. thank you for choosing fixya.com and as always, if you need further assistance please post your question and we will be happy to assist you.
435 views
Usually answered in minutes!
×